THCFarmer.com
121,115 Members Log In Register
Log In Register

Finally

  • Thread starter Thread starter Srenots
  • Start date Start date
  • Tagged users Tagged users None

Finally

Srenots 14,428 Replies 1,067,710 Views
Page 39 of 722 · Replies 761–780 of 14,429
#762
Srenots said:
got another temp guage, and for the hell of it , wanted to see if they were the same...they are spot on except for recorded Temp and RH...this is after 1 hour side by side.....of course I could have pulled out batteries and reset....just wanted to see if they were both working the same....

View attachment 656591
Click to expand...

If your not careful those temp guages will both link to 1 sensor. I've done it a few times since I have 3 around the house.

You have to take the batteries out of each unit and reinstall to reset the Guage and link to the sensor. Just make sure the Guage and sensor is far away from the 2nd Guage and sensor.

That may be why you think they are calibrated the same.
 
#763
rmoltis said:
If your not careful those temp guages will both link to 1 sensor. I've done it a few times since I have 3 around the house.

You have to take the batteries out of each unit and reinstall to reset the Guage and link to the sensor. Just make sure the Guage and sensor is far away from the 2nd Guage and sensor.

That may be why you think they are calibrated the same.
Click to expand...
ya i reset them thx , good info
 
#764
Srenots said:
ya i reset them thx , good info
Click to expand...

I would try resetting each one 20-30+ feet apart from one another.

You reset them both too close they will link to 1 sensor still.

Good way to check would be to place one sensor outside and one inside the house.

Check both guages.
If they both read the same you'll know which sensor they are both linked to.

Or you'll notice they are both seperate.
 
#766
ladies comin along nice...some yo-yos needed

16ladiesyyofp
 
Page 39 of 722 · Replies 761–780 of 14,429
Back
Top Bottom