Log In Register

Council Of First Knowledge, Jedi Temple Training Facility

  • Thread starter Thread starter EventHorizan
  • Start date Start date
  • Tagged users Tagged users None

Council Of First Knowledge, Jedi Temple Training Facility

EventHorizan 21,559 Replies 1,774,048 Views
Page 433 of 1078 · Replies 8,641–8,660 of 21,560
Status
Not open for further replies.
too late!
I use it for the system!
I need 3 extra bulkheads for next run so i can pull the epicenter out of the tent..
Dude,,, if i have 10 buckets in my tent that is just 1 less than what i just ran!
It should really bang out some colas!
I think im just gonna use fan leaf technique with scrog already installed..

But bro i can't quit thinking of how incredible having 10 buckets in there,
WITH the net pots that have 4- 5.5 netpots..
Thats 40 fan leaf techniqued plants..
Might be epic!
 
Dude,,, if i have 10 buckets in my tent that is just 1 less than what i just ran!
It should really bang out some colas!
I think im just gonna use fan leaf technique with scrog already installed..

But bro i can't quit thinking of how incredible having 10 buckets in there,
WITH the net pots that have 4- 5.5 netpots..
Thats 40 fan leaf techniqued plants..
Might be epic!

Lol.. there is a point where it becomes too much bro.. even 6 buckets in you 4x8 space you can easily max your space out with 3-4 weeks of veg. 10 buckets I bet you wouldn’t even want to veg for more than a week or two.. it would be like a freakin jungle in there!

Let me know if you want pics of how I used the rubber couplings..
 
Eh 5% on 4$ is only 20 cents anyways haha..

Would be cheaper if you got two 2” pvc couplings, a 2” pvc tee, some pipe, & 1 2” bulkhead..

When I was re-arranging my buckets I had the same situation as you where there was no pipe to cut between the bulkhead and the fitting. what I did was use a rubber no-hub coupling and that will barely fit over the fitting/bulkhead and allow you to join the pipe to it.

You will need a no-hub rubber coupling anyways because you don’t want to have to drill a hole big enough for the whole bulkhead through your tent..

Something like this..

LDR 808 NHC-200 2-Inch no Hub Coupling https://www.amazon.com/dp/B004678ECE/ref=cm_sw_r_cp_api_dha0zbABZWRSP
Well my pvc running out the tent goes thru a 6" ducting hole so no worries there..
Only worries i have left,
is weather i can put a float valve in one of these 105 gal reservoirs at the top coming from my ro filter


 
Lol.. there is a point where it becomes too much bro.. even 6 buckets in you 4x8 space you can easily max your space out with 3-4 weeks of veg. 10 buckets I bet you wouldn’t even want to veg for more than a week or two.. it would be like a freakin jungle in there!

Let me know if you want pics of how I used the rubber couplings..
well I promise you im KING KONG and im gonna be the master of my jungle lol!
Hahaha this hash i made is pretty good. Was green looking and i thought it was gonna be god awful... but it may be my best..
Sometimes you just dont know wtf you got!

Your right tho! I will have to employ certain techniques,
and im still learning, but this exactly the platform I would ask to learn on...

Im just gonna buy new and use them..
That way when i sell my system in about 5 years it will still have all the stock pieces too.
I only plan to run full ballz to the wall for 5 yrs,,
Then i reduce down to just a good light and a 3x3 box for personal...
by then i will be able to afford a 600 chilled led and bang out 2 peasies a run in it..
 
Well my pvc running out the tent goes thru a 6" ducting hole so no worries there..
Only worries i have left,
is weather i can put a float valve in one of these 105 gal reservoirs at the top coming from my ro filter



Your tent has a 6” duct hole at the very very bottom of your tent?!? Pic?

I would not trust one of those inside a house.. I would only trust that if you were somewhere flooding doesn’t matter that much.. get 2x brute trash cans if you want 100 gallons of Rez..
 
Your tent has a 6” duct hole at the very very bottom of your tent?!? Pic?

I would not trust one of those inside a house.. I would only trust that if you were somewhere flooding doesn’t matter that much.. get 2x brute trash cans if you want 100 gallons of Rez..
Unfortunatly i cant get nothing in there bigger than 2x5..
I never thought i would need to get a brute can in there.. I would have to remove drywall and some studs, and go thru the wall AND that aint happening..

And let me see if i can find a pic..
 
well I promise you im KING KONG and im gonna be the master of my jungle lol!
Hahaha this hash i made is pretty good. Was green looking and i thought it was gonna be god awful... but it may be my best..
Sometimes you just dont know wtf you got!

Your right tho! I will have to employ certain techniques,
and im still learning, but this exactly the platform I would ask to learn on...

Im just gonna buy new and use them..
That way when i sell my system in about 5 years it will still have all the stock pieces too.
I only plan to run full ballz to the wall for 5 yrs,,
Then i reduce down to just a good light and a 3x3 box for personal...
by then i will be able to afford a 600 chilled led and bang out 2 peasies a run in it..

Lol King Kong or not bro you will see shit literally explodes in this system..

Unfortunatly i cant get nothing in there bigger than 2x5..
I never thought i would need to get a brute can in there.. I would have to remove drywall and some studs, and go thru the wall AND that aint happening..

And let me see if i can find a pic..

Eh imo you want something solid, brute cans are just the cheapest and easiest things to use. I’ve seen ppl use those flexi tanks inside before but I’m a clumsy motherfucker and I known I would lean on it wrong or something and dump the whole Rez in my room..
 
Lol King Kong or not bro you will see shit literally explodes in this system..



Eh imo you want something solid, brute cans are just the cheapest and easiest things to use. I’ve seen ppl use those flexi tanks inside before but I’m a clumsy motherfucker and I known I would lean on it wrong or something and dump the whole Rez in my room..
Its the only thing i can get in there..
Beleive me i wanted something diff but i dont have no other choices..
This the best pic i got..
I get a better one later..
 

Attachments

  • 20170930_122327.jpg
    20170930_122327.jpg
    94 KB · Views: 52
Its the only thing i can get in there..
Beleive me i wanted something diff but i dont have no other choices..
This the best pic i got..
I get a better one later..

The hole on the right side of the bucket? You think it’s gunna be low enough? I have a gorilla tent so I’m sure it’s different but none of my duct holes were even close to the bottom at all..

My hole starts like 1-1.5” up from the bottom of the tent
 
If you want to be official scroll all the way to the bottom and get the 250 doorway tank..
Ya i checked them out too..
A lil big still..
This isnt a reg doorway..
I closed off a room and made a small doorway that will have a closet in front of it..
Not so much to hide it from cops as im just dont want kids, grand kids, vistors or burglars to find it..
 
The hole on the right side of the bucket? You think it’s gunna be low enough? I have a gorilla tent so I’m sure it’s different but none of my duct holes were even close to the bottom at all..

My hole starts like 1-1.5” up from the bottom of the tent
I might have to check that!!
Good point!
Well i have a new cover for this tent still in box.
So i dont mind a lil diy on the tent as long as i know thats the way i want it and the way it needs to be!
 
Ya i checked them out too..
A lil big still..
This isnt a reg doorway..
I closed off a room and made a small doorway that will have a closet in front of it..
Not so much to hide it from cops as im just dont want kids, grand kids, vistors or burglars to find it..

Well imo if that’s your only choice build something to make sure it doesn’t collapse on you somehow. You don’t want 100 gallons dumping into your room with a float valve to dump more.
Edit: make sure you can still remove it though as you will need to clean it regularly..

Here’s a pic of my epicenter going through my tent for reference.. also shows the rubber coupling I was talking about if you need to cut the pipe on a bulkhead flush..

0_BAFD7_BD-_BD94-4879-9722-1_D17869_FB71_F.jpg


Bulkheads are $$$ couplings are cheap and available at any hardware..
 
Well imo if that’s your only choice build something to make sure it doesn’t collapse on you somehow. You don’t want 100 gallons dumping into your room with a float valve to dump more.

Here’s a pic of my epicenter going through my tent for reference.. also shows the rubber coupling I was talking about if you need to cut the pipe on a bulkhead flush..

0_BAFD7_BD-_BD94-4879-9722-1_D17869_FB71_F.jpg


Bulkheads are $$$ couplings are cheap and available at any hardware..
Well imo if that’s your only choice build something to make sure it doesn’t collapse on you somehow. You don’t want 100 gallons dumping into your room with a float valve to dump more.

Here’s a pic of my epicenter going through my tent for reference.. also shows the rubber coupling I was talking about if you need to cut the pipe on a bulkhead flush..

0_BAFD7_BD-_BD94-4879-9722-1_D17869_FB71_F.jpg


Bulkheads are $$$ couplings are cheap and available at any hardware..
Its gonna set behind my tent in the corner..
Ya I know they aint cheap but hell i got 2" uniseals already that I could use!
Didnt think of that!
 
Its gonna set behind my tent in the corner..
Ya I know they aint cheap but hell i got 2" uniseals already that I could use!
Didnt think of that!

I hate uni seals lol.. why not use rubber couplings? I’m a plumber, I trust those waayyyyy over a uni seal... plus uniseals are a complete pain in the ass..

Maybe build a small 2x3 wall up half way or 3/4 the sides of the Rez..?
 
I hate uni seals lol.. why not use rubber couplings? I’m a plumber, I trust those waayyyyy over a uni seal... plus uniseals are a complete pain in the ass..

Maybe build a small 2x3 wall up half way or 3/4 the sides of the Rez..?
Because they remind me of my sewer..
I got a 1200 machine with sewer extentions on it..
Lol...
Im not against using them per se..
Hell i used them 20 years ago to steal anhydrous ammonia out of huge mother tanks..
Im an expert in them...
:)
 

Attachments

  • 20170930_164257.jpg
    20170930_164257.jpg
    62.7 KB · Views: 49
Because they remind me of my sewer..
I got a 1200 machine with sewer extentions on it..
Lol...
Im not against using them per se..
Hell i used them 20 years ago to steal anhydrous ammonia out of huge mother tanks..
Im an expert in them...
:)

There’s a reason they use them on sewers... cause they work good.. lol then you only need to buy 1x pvc tee, 2x pvc couplings, pipe, glue, & 1x 2” no hub coupling. Probably run you 10$ or so and you would get your epicenter out of the tent.

Edit: could also just get 2x no hub couplings and pipe then you just cut right between bulkhead & tee and use a coupling on each side.. easiest & cheapest.
 
well I promise you im KING KONG and im gonna be the master of my jungle lol!
Hahaha this hash i made is pretty good. Was green looking and i thought it was gonna be god awful... but it may be my best..
Sometimes you just dont know wtf you got!

Your right tho! I will have to employ certain techniques,
and im still learning, but this exactly the platform I would ask to learn on...

Im just gonna buy new and use them..
That way when i sell my system in about 5 years it will still have all the stock pieces too.
I only plan to run full ballz to the wall for 5 yrs,,
Then i reduce down to just a good light and a 3x3 box for personal...
by then i will be able to afford a 600 chilled led and bang out 2 peasies a run in it..
sounds like a tell all of my life story!!

I am able to bang out lots o bud from a small space because I employ sound practices and solid techniques....Maximize Canopy space and let nature do the rest
just as you and I have preached

Sometimes I just think people just dont get it

people see pictures of buds and hear stories and think there is some kind of trick or secret warp to the next level

but when you visit a serious facility...and they are movin serious weight and realize the only thing they are doing is "standard practices" it takes a shit on the "secret recipe" narative

even then people still have it in the back of their mind that there is an easier way

reality is
1. Cultivar/Genetics
2. Light
3. CO2/O2
4. Water
5. Nutrients

in that order
and then solid frowing techniques/practices

Canopy maintenance
Feed ph
air flow
feed regularity

such easy stuff that many "new to the hobbie/industry" cant really grasp yet

but it is fun to see when the lightbulb finally goes on.....and they get it....how fast their grow changes to almost a professional by the numbers checklist in hand grow.....with great production and tasty flowers
 
sounds like a tell all of my life story!!

I am able to bang out lots o bud from a small space because I employ sound practices and solid techniques....Maximize Canopy space and let nature do the rest
just as you and I have preached

Sometimes I just think people just dont get it

people see pictures of buds and hear stories and think there is some kind of trick or secret warp to the next level

but when you visit a serious facility...and they are movin serious weight and realize the only thing they are doing is "standard practices" it takes a shit on the "secret recipe" narative

even then people still have it in the back of their mind that there is an easier way

reality is
1. Cultivar/Genetics
2. Light
3. CO2/O2
4. Water
5. Nutrients

in that order
and then solid frowing techniques/practices

Canopy maintenance
Feed ph
air flow
feed regularity

such easy stuff that many "new to the hobbie/industry" cant really grasp yet

but it is fun to see when the lightbulb finally goes on.....and they get it....how fast their grow changes to almost a professional by the numbers checklist in hand grow.....with great production and tasty flowers
I agree brother!
It really is easy to understand once you got the fundamentals.
Its harder to maintain a environment that it is to grow.
Sometimes im amazed when i see older growers
with just serious waste of space and light...
Im mean even for personal,
u still want as much as possible for the electrical costs!
Idk...
I just went thru the potm contest to hand out my 3 likes and i see nothing bud pics of buds.. After a while they all look the same to me.. I want to see canopy control..Show me some skill!
 
Status
Not open for further replies.
Page 433 of 1078 · Replies 8,641–8,660 of 21,560
Back
Top Bottom