THCFarmer.com
121,291 Members Log In Register
Log In Register

Council Of First Knowledge, Jedi Temple Training Facility

  • Thread starter Thread starter EventHorizan
  • Start date Start date
  • Tagged users Tagged users None

Council Of First Knowledge, Jedi Temple Training Facility

EventHorizan 21,559 Replies 1,811,298 Views
Page 616 of 1078 · Replies 12,301–12,320 of 21,560
Status
Not open for further replies.
#12,301
Cityfarmin said:
Check this out, I put some plywood over a ladder and screwed it in place with some long screws and bolts, then I attached a 6inch exhaust fan and ran it out the hole in the plexiglass. It seems to be working so fat
Click to expand...

Is it workin? How long has it been running so far?

@EventHorizan no it was me who’s ec was why too high haha..
 
#12,303

Attachments

  • D85D31A4-C080-4208-9993-48CAFBFB69F8.jpeg
    D85D31A4-C080-4208-9993-48CAFBFB69F8.jpeg
    37.1 KB · Views: 53
#12,304
Also check this out!

Made a table for my flood tray, it came out too big cause the Home Depot dick cut it too long but I’ll fox that, it’s just 1-2 inches on each side.
 

Attachments

  • 995096DC-DF16-4F09-86DD-04D714BC3FE8.jpeg
    995096DC-DF16-4F09-86DD-04D714BC3FE8.jpeg
    67.2 KB · Views: 58
#12,305
Toph420 said:
Is it workin? How long has it been running so far?

@EventHorizan no it was me who’s ec was why too high haha..
Click to expand...


Yea seems to be, room was 89 degrees and it’s now 79 and dropping. I think I got it!!! Thanks a lot man.

I was thinking about doing it but I was nervous about drawing attention with it exhausting to the shaft of another room. I think if I run it while I’m here everything should be fine
 
#12,306
Or i
Cityfarmin said:
Also check this out!

Made a table for my flood tray, it came out too big cause the Home Depot dick cut it too long but I’ll fox that, it’s just 1-2 inches on each side.
Click to expand...
might just say fuck it and cut a piece of styrofoam to fit the 38x38, cut some holes for the table and Res in the styrofoam and call it a day. Bro Home Depot has water pumps that cost 200$, Im just gonna stop by my hydro guy tomorrow early
 
#12,308
Cityfarmin said:
Or i

might just say fuck it and cut a piece of styrofoam to fit the 38x38, cut some holes for the table and Res in the styrofoam and call it a day. Bro Home Depot has water pumps that cost 200$, Im just gonna stop by my hydro guy tomorrow early
Click to expand...
they got 20 ones too..
 
#12,312
Wisher619 said:
dude...hydrostore $20.00 250gph pump
perfect for Flood n Drain
Click to expand...

Was about to say the same thing.. I’m using a 160gph pump for my veg table and it works great, I already had it so figured midswell..

Veg update, yes I checked the ec again haha, 1.4.. I forgot to ask, could the tea feeding have made my ec go up crazy high if some of it drained back into res?

Seems like everyone is praying, I’m happy..

410BE231 FDB2 492B 936A DB49741DF725
 
#12,313
Toph420 said:
Was about to say the same thing.. I’m using a 160gph pump for my veg table and it works great, I already had it so figured midswell..

Veg update, yes I checked the ec again haha, 1.4.. I forgot to ask, could the tea feeding have made my ec go up crazy high if some of it drained back into res?

Seems like everyone is praying, I’m happy..

View attachment 756545
Click to expand...
it is possible
 
#12,314
Wisher619 said:
it is possible
Click to expand...


Yea I’m gonna go tomorrow, but since I was at Home Depot getting pvc pipes to build the flood table I figured I see if they had the pump and they didn’t, so I was just keeping updated. I’m gonna go to my hydro guy tomorrow, I know for a fact he has it. I was just shocked that the Home Depot I went to only had ones $99 at the cheapest. But it’s all gravy. I got the a/c unit locked in, got the table built ( I’m just gonna throw some styrofoam on top and cut hole in it where needed and I’ll setup my flood table tomorrow.

I do have a question though.

My flood tables were originally bought so I could catch the run off and it not spill onto the floor of my tent. That in mind they are only 3/4 of a inch high, meaning the walls, will that be high enough to flood and allow the plants to feed and grow?

Should I just fill the table with clay pebbles and space my plants in the clay 12 inches apart or should I try to run them in net pots and/or coco?

I’m prob asking a lot of stupid question but I have only grown in soil for the past 2 grows. So I need all the info I can gather and any help is much appreciated.
 
#12,317
Cityfarmin said:
Yea I’m gonna go tomorrow, but since I was at Home Depot getting pvc pipes to build the flood table I figured I see if they had the pump and they didn’t, so I was just keeping updated. I’m gonna go to my hydro guy tomorrow, I know for a fact he has it. I was just shocked that the Home Depot I went to only had ones $99 at the cheapest. But it’s all gravy. I got the a/c unit locked in, got the table built ( I’m just gonna throw some styrofoam on top and cut hole in it where needed and I’ll setup my flood table tomorrow.

I do have a question though.

My flood tables were originally bought so I could catch the run off and it not spill onto the floor of my tent. That in mind they are only 3/4 of a inch high, meaning the walls, will that be high enough to flood and allow the plants to feed and grow?

Should I just fill the table with clay pebbles and space my plants in the clay 12 inches apart or should I try to run them in net pots and/or coco?

I’m prob asking a lot of stupid question but I have only grown in soil for the past 2 grows. So I need all the info I can gather and any help is much appreciated.
Click to expand...

Dang 3/4” is pretty low for a flood tray bro, your way better off running drain to waste if possible. it’s pretty much just as easy as flood and drain but you have to run tubing to each plant.. can anyone point him in the right direction on how to set that up..?

Cityfarmin said:
I kinda looked it up, if its really cost that much I'll have to hold off on that.
I can't spend 700$ on a light right now, Maybe there are cheaper one I just have to look harder
Click to expand...

If you got the A/C workin your good for now, don’t worry about getting those lights until you’ve done however many cycles..
 
#12,320
Cityfarmin said:
Yea I’m gonna go tomorrow, but since I was at Home Depot getting pvc pipes to build the flood table I figured I see if they had the pump and they didn’t, so I was just keeping updated. I’m gonna go to my hydro guy tomorrow, I know for a fact he has it. I was just shocked that the Home Depot I went to only had ones $99 at the cheapest. But it’s all gravy. I got the a/c unit locked in, got the table built ( I’m just gonna throw some styrofoam on top and cut hole in it where needed and I’ll setup my flood table tomorrow.

I do have a question though.

My flood tables were originally bought so I could catch the run off and it not spill onto the floor of my tent. That in mind they are only 3/4 of a inch high, meaning the walls, will that be high enough to flood and allow the plants to feed and grow?

Should I just fill the table with clay pebbles and space my plants in the clay 12 inches apart or should I try to run them in net pots and/or coco?

I’m prob asking a lot of stupid question but I have only grown in soil for the past 2 grows. So I need all the info I can gather and any help is much appreciated.
Click to expand...

3/4" high? WTF
dude I never heard of such a small tray

maybe you should set up a drip system then
 
Status
Not open for further replies.
Page 616 of 1078 · Replies 12,301–12,320 of 21,560
Back
Top Bottom