New to DWC

  • Thread starter FMJ
  • Start date
  • Tagged users None
Aqua Man

Aqua Man

26,480
638
Thanks ! Normally they're back on in less than an hour , but we are having heavy storms at the moment.... If it's not back on in 30 minutes to an hour, I'm gonna go buy a 12v live well air pump....
that'll work
 
FMJ

FMJ

50
18
Little one has a pH of 6.01and almost 900 ppm...going down steadily. Big one pH is at 6.4 and 1100 ppm and steadily going down. Added RO to top off yesterday. Looks like I'm back on track..... Thanks for the help gentlemen.....๐Ÿ˜‰๐Ÿ‘๐Ÿ‘
 
IMG 20200519 053328
IMG 20200519 053334
IMG 20200519 053340
Aqua Man

Aqua Man

26,480
638
Little one has a pH of 6.01and almost 900 ppm...going down steadily. Big one pH is at 6.4 and 1100 ppm and steadily going down. Added RO to top off yesterday. Looks like I'm back on track..... Thanks for the help gentlemen.....๐Ÿ˜‰๐Ÿ‘๐Ÿ‘
Want those down to 4-500ppm if ya can but good work ๐Ÿ‘๐Ÿ‘
 
FMJ

FMJ

50
18
Want those down to 4-500ppm if ya can but good work ๐Ÿ‘๐Ÿ‘
Yeah, working on it.... The reason it's high is cuz I used a little of the water I had with the organic food in it. Looking back , it's for edible fruit/plants. It's just too heavy. I can "see" it floating around in the nute solution... Gonna pull some probably, and top off again to dilute.... ๐Ÿคทโ€โ™‚๏ธ
 
FMJ

FMJ

50
18
Ol , the hydroponic store was finally open so I went and bought more Grow Big , some cal-mag , and some hydro guard....
Made fresh nute solution, and washed my plants. Then I made up 2 new reservoirs. After putting the plants back in , my ppm is 835 in small one and 920 in big one. Ph was 3.45 in both.... Added pH up , tiny bit, and waiting to recheck. Why did the ppm go up this time ? Because I used all 3 solutions at the same time ? Oh this is starting to be a headache. Can't seem to get this nute solution down..... โ˜น๏ธ
 
Aqua Man

Aqua Man

26,480
638
Ol , the hydroponic store was finally open so I went and bought more Grow Big , some cal-mag , and some hydro guard....
Made fresh nute solution, and washed my plants. Then I made up 2 new reservoirs. After putting the plants back in , my ppm is 835 in small one and 920 in big one. Ph was 3.45 in both.... Added pH up , tiny bit, and waiting to recheck. Why did the ppm go up this time ? Because I used all 3 solutions at the same time ? Oh this is starting to be a headache. Can't seem to get this nute solution down..... โ˜น๏ธ
Using RO?
 
FMJ

FMJ

50
18
Use a half ml per gal and check the ppm of its 100 try that. You may need more later.

How is the ph stability Biver 24 hrs?

After redoing my reservoirs following your recipe , I got my nutrient solution to mid 500's..... ๐Ÿฅฐ๐Ÿฅฐ Feeling so much better now. My PH stays fairly consistent, hovers around 5.6 5.8.... I noticed last night that the very tips of some of the fan leaves were white/ish .... I new I had to get the nutes right or these two would eventually croak too...
The small one has brownish looking root tangle on one side and whiter looking roots on the other. Will post some pics after I take the kids in from playing outside. The big one looks better. They don't look no where near as full and massive like I see in others pics, but these are still small I suppose.
I'm wanting to flip the lights soon so that these will be "ready" for my birthday in a couple months. I didn't intend on growing these big . This is just an experiment to see if my thumb was green enough to step up to DWC. So far , I'm already planning on going full bore with the next go around. Will be adding a helluva lot more light , and a bigger vent fan. I don't think this 4" fan that came with this kit is quite big enough. My box temps max out around 90ยฐ F ... Humidity is in the 50-60% range normally.
Gonna redo the interior with a reflective surface.
Thanks for the help Aqua Man and congratulations on your new position !
 
Aqua Man

Aqua Man

26,480
638
After redoing my reservoirs following your recipe , I got my nutrient solution to mid 500's..... ๐Ÿฅฐ๐Ÿฅฐ Feeling so much better now. My PH stays fairly consistent, hovers around 5.6 5.8.... I noticed last night that the very tips of some of the fan leaves were white/ish .... I new I had to get the nutes right or these two would eventually croak too...
The small one has brownish looking root tangle on one side and whiter looking roots on the other. Will post some pics after I take the kids in from playing outside. The big one looks better. They don't look no where near as full and massive like I see in others pics, but these are still small I suppose.
I'm wanting to flip the lights soon so that these will be "ready" for my birthday in a couple months. I didn't intend on growing these big . This is just an experiment to see if my thumb was green enough to step up to DWC. So far , I'm already planning on going full bore with the next go around. Will be adding a helluva lot more light , and a bigger vent fan. I don't think this 4" fan that came with this kit is quite big enough. My box temps max out around 90ยฐ F ... Humidity is in the 50-60% range normally.
Gonna redo the interior with a reflective surface.
Thanks for the help Aqua Man and congratulations on your new position !
Good news man ๐Ÿ‘ have pics of the roots? Have a fox for ya if it's root rot really simple but best to not do it if ya don't have to.

Thanks for the Gratz
 
FMJ

FMJ

50
18
No, I ended up eating again , and well, got super lazy....๐Ÿ˜ I'll get some pics today when they wake up for the day. I think I'm more concerned with them being tangled up in a mass than anything. Not sure if it's normal or just a side effect from all the bubbles..... ๐Ÿคทโ€โ™‚๏ธ
I'll just post a video later. Cover all of it at once....๐Ÿ˜
 
Aqua Man

Aqua Man

26,480
638
In the video , I meant to say , the deformed leaf happened about 2 weeks ago. The white tips just appeared like Sunday
Roots are looking good. It appears there may have been some root rot and it's clearing up. The leaf may have been from that it's very normal to see leaf deformation from root issues. The burnt tips are from previous high nutes new growth looks good so I think your about right now.

You can mix hydrogaurd at double dose into 1 gal and pour over the top every 2 days for 3-4 times. This will clear up any root rot in the hydroton and help rinse any salt accumulation. Next water change lower the water level to about 1" below the bottom of the net pot.
 
FMJ

FMJ

50
18
Roots are looking good. It appears there may have been some root rot and it's clearing up. The leaf may have been from that it's very normal to see leaf deformation from root issues. The burnt tips are from previous high nutes new growth looks good so I think your about right now.

You can mix hydrogaurd at double dose into 1 gal and pour over the top every 2 days for 3-4 times. This will clear up any root rot in the hydroton and help rinse any salt accumulation. Next water change lower the water level to about 1" below the bottom of the net pot.
An inch below the net pot ? The instructions that came with it said to keep it half way up the center cone.
So they won't dry out being exposed? Oh , well I guess they're getting wet..... Face palm....๐Ÿ˜ Ok well I'll let these go for a while before I add any straight RO.... And I'll add the 'germs to it to wash as I refill.....๐Ÿ˜
Thanks for the help !
 
FMJ

FMJ

50
18
Roots are looking good. It appears there may have been some root rot and it's clearing up. The leaf may have been from that it's very normal to see leaf deformation from root issues. The burnt tips are from previous high nutes new growth looks good so I think your about right now.

You can mix hydrogaurd at double dose into 1 gal and pour over the top every 2 days for 3-4 times. This will clear up any root rot in the hydroton and help rinse any salt accumulation. Next water change lower the water level to about 1" below the bottom of the net pot.

Hey you need to change your first name to Imda ......my babies are looking great thanks to you! Not to mention actually growing again. I'm getting about an inch in height growth daily..... Little one has been stuck at around 10" tall and 13" diameter. In 3 days , it's now 13" and 16"+ in diameter. The big one was stuck at 17"-18"....and 12" diameter. It's now pushing 21" tall and 16+ in diameter.....
VERY pleased with the results again.... Thanks again Aqua Man..... This is your handy work..... I'm greatful for the knowledge you have bestowed upon me...๐Ÿค“
Going to change light cycle now, to go into flower mode. I still have to make a light seal for my door, but that is fast and easy.....
Do you have an ancient secret recipe for the fruit stage nutes ? ๐Ÿ˜๐Ÿ˜
 
IMG 20200530 193211
Aqua Man

Aqua Man

26,480
638
Hey you need to change your first name to Imda ......my babies are looking great thanks to you! Not to mention actually growing again. I'm getting about an inch in height growth daily..... Little one has been stuck at around 10" tall and 13" diameter. In 3 days , it's now 13" and 16"+ in diameter. The big one was stuck at 17"-18"....and 12" diameter. It's now pushing 21" tall and 16+ in diameter.....
VERY pleased with the results again.... Thanks again Aqua Man..... This is your handy work..... I'm greatful for the knowledge you have bestowed upon me...๐Ÿค“
Going to change light cycle now, to go into flower mode. I still have to make a light seal for my door, but that is fast and easy.....
Do you have an ancient secret recipe for the fruit stage nutes ? ๐Ÿ˜๐Ÿ˜
Looking great glad it's working out bro
 
  • Like
Reactions: FMJ
Top Bottom