Log In Register

Best indoor cannabis growing tent.

  • Thread starter Thread starter Dub_City405
  • Start date Start date
  • Tagged users Tagged users None

Best indoor cannabis growing tent.

Dub_City405 26 Replies 5,573 Views
Page 1 of 2 · Replies 1–20 of 27
Not saying its the best...my 10x10 is vivosun.For the price i got it for you cant beat it.The company whos names not to be mentioned didnt make a 10x10 or i would have gotten it.
 
Gorilla is a good investment, very durable and structurally sound...zippers are heavy duty. Only gripe for me is the zipper in the front should hang down more. I have a small 2x4 yield lab for veg since the quality is not as good. Much thinner materials, window coverings leave alot to be desired.
 
I have three different brands:

"DRI" a brand I got at my local grow shop, this is a 5' x 5'.
A Growlab Clonelab 4' x 2'
Two Gorilla tents, a 4' x 4' and a 3' x 3'.

The Gorilla tents are the best built, with higher quality materials and somewhat better thought out and easier to put up than the DRI brand. The Growlab is pretty good. It's a small tent, only about 54" tall so putting it up is not hard at all.

Anyway, if quality is the only guide, I like Gorilla. Other brands are considerably cheaper, but I find you get what you pay for.
 
I have an I-power and I dunno what brand the other one is lmao I'll have to look again. One of the main things I chose these for is the fact that they have all metal framing corner connectors instead of composite. In theory I thought they would be a lil more sturdy
 
I can't find the name on it lol but here's a corner. Both were built pretty well imo, couple pin holes in the canvas happen sometimes but it's easy to remedy, I use a small piece of aluminum tape
20210304 102359
 
I was particularly aiming for quality brands but a specific height i want to get a nice light. But if i put a stand and tray im limited on 2 ft or even 3 ft. Ideally i should use a room. But i now have 3 or 4 tents to research. 👍
 
I use a Grow Shop Outlet 4x4x6.5, bought it from htg supply. Quality is pretty good, but since I've not used any other tent previously that's a bit of a naive judgement. Zipper quality is on point, a few pinhole light leaks around the seams, but overall the material is heavy enough, and setup wasn't terribly difficult. My only gripe is the plastic corner pieces, I've read about other tent manufacturers having problems with the plastic corners failing after multiple set up and tear downs.
 
The spider farmer 5ft×5ft×80 in. tent has no seem light leaks. A little leakage where i have a duct open for a box fan. The girls got a major haircut last night. I forget the price of the tent, like $180 max off of amazon. Had it in 2 days, fan and filter also.
 

Attachments

  • 16149002550686481088060866459778.jpg
    16149002550686481088060866459778.jpg
    189.1 KB · Views: 131
  • 16149003207608463980960143596315.jpg
    16149003207608463980960143596315.jpg
    504.3 KB · Views: 129
I have a "Black Box Living Room" tent. 60x60x195cm. Metal frame, simple to put together. One or two pinholes, but it comes with a couple of strips of the fabric it's made out of instead of twist ties. Seams have some pinholes too. Still working fine for me. About $120 Canadian.
 
I got the Viparspectra 4'x4'x80" and like it so far, still need AC Infinity inline and filter & some clip fans.
Here's a pic. Havent seen any pin holes. My buddy grows under a sheet and some chairs with an old HPS he recently re-wired to "fix" it.
 

Attachments

  • 20210211_085540 (1).jpg
    20210211_085540 (1).jpg
    258 KB · Views: 115
+1 on the AC Infinity Cloudline tents. With their fans and exterior mounted digital controller they are decent setups for reasonable $. I also have a couple of the cheaper brands including a Mars Hydro. They are ok. Not the best but they will do the job if your budget is tight.
 
I was particularly aiming for quality brands but a specific height i want to get a nice light. But if i put a stand and tray im limited on 2 ft or even 3 ft. Ideally i should use a room. But i now have 3 or 4 tents to
So i an having the same height issue with my hydro stand and table. I want my plants to be able to grow. What i am going to do is build a stand for my tent. Not the flood tray. Then i will cut a vouple holes for the hoses in the floor of my tent and put a rubber grommet in the hole and hot glue it or something. Then have my res under the tent. I get an extra 16 inches of plant growth
 
Page 1 of 2 · Replies 1–20 of 27
Back
Top Bottom