Chemistry's persoanl grow.

[Madmax]

I mentioned to another grower my grows are getting boring but he said borings good
as everythings running smoothly .i think thats the case here lol..your right on top of your game chem..seems everthings running smoothly hows the craft beer brewing coming along.tried any new products new flavours..any pics of the flowers you got growing outside.

 

[GreenMtnGuru]

I mentioned to another grower my grows are getting boring but he said borings good
as everythings running smoothly .i think thats the case here lol..your right on top of your game chem..seems everthings running smoothly hows the craft beer brewing coming along.tried any new products new flavours..any pics of the flowers you got growing outside.

If it’s getting boring pop 50 or 100 seeds and do a pheno hunt!!!

That’ll keep you occupied for, oh, six months with all the cloning and labeling and stuff. Then you’ll want to collect pollen, backcross, build a lab, etc….

 

[Aqua Man]

If it’s getting boring pop 50 or 100 seeds and do a pheno hunt!!!

That’ll keep you occupied for, oh, six months with all the cloning and labeling and stuff. Then you’ll want to collect pollen, backcross, build a lab, etc….

The rabbit hole is deep

 

[chemistry]

I mentioned to another grower my grows are getting boring but he said borings good
as everythings running smoothly .i think thats the case here lol..your right on top of your game chem..seems everthings running smoothly hows the craft beer brewing coming along.tried any new products new flavours..any pics of the flowers you got growing outside.

Tried a rubarb and custard beer kiit, it was a cheap one on ebay, I now know why it was cheap, it was horrible, additive over load.

 

[Madmax]

If it’s getting boring pop 50 or 100 seeds and do a pheno hunt!!!

That’ll keep you occupied for, oh, six months with all the cloning and labeling and stuff. Then you’ll want to collect pollen, backcross, build a lab, etc….

Haha..fuck that lol..id rather spend all that time building my tough streeter

 

[Madmax]

Tried a rubarb and custard beer kiit, it was a cheap one on ebay, I now know why it was cheap, it was horrible, additive over load.

Lol..what was you thinking .you really have tried em all...kudus for giving that one a try though..

 

[chemistry]

Lol..what was you thinking .you really have tried em all...kudus for giving that one a try though..

I was talked into it by stoned buddies, normally I would resist these suggestions at all cost, but I was a bit stoned, I was dared to buy it, so I was pushed.

 

[oldskol4evr]

Haha..fuck that lol..id rather spend all that time building my tough streeter

i still have this 350 sitting behind my chair i havent built , im having a melt down to pay 200 bucks for a crank shaft, figure if i have to buy one i will just buy one with the 3 75 throw and make it a stroker while im at it , but damn 200 bucks dont even have a balanced bob weight to it

 

[oldskol4evr]

I was talked into it by stoned buddies, normally I would resist these suggestions at all cost, but I was a bit stoned, I was dared to buy it, so I was pushed.

peer pressure will screw you more than the wife bro hahah , i ferment my nutrients and that as far as i go, i have made plenty of fine looking chesse , just never tasted it ,Yet lol

 

[Madmax]

i still have this 350 sitting behind my chair i havent built , im having a melt down to pay 200 bucks for a crank shaft, figure if i have to buy one i will just buy one with the 3 75 throw and make it a stroker while im at it , but damn 200 bucks dont even have a balanced bob weight to it

You should see what we pay here oldy.i dont mind strokers .get more bang for your buck.lose abit of low down revs though but heaps more top end..im putting a rice motor in my holden lol..looking at 600hp turboed but with a quick tune take it out over 800 ponies..i know...what the heck you doin putting a ricer in instead of an 8 banger ..its cheaper going the turbo route than spending gazillions to build a hand grenade lol..putting plastic sheets on pasenger side just incase a mate springs a leak and poops his pants hahaha.

 

[SSgrower]

I paid $700 for a mustang aluminum driveshaft once, went to get 1 for my GT mustang and they were $850 or so. I also have a F150 3.5 L Ford truck w/twin turbo. SS

 

[oldskol4evr]

You should see what we pay here oldy.i dont mind strokers .get more bang for your buck.lose abit of low down revs though but heaps more top end..im putting a rice motor in my holden lol..looking at 600hp turboed but with a quick tune take it out over 800 ponies..i know...what the heck you doin putting a ricer in instead of an 8 banger ..its cheaper going the turbo route than spending gazillions to build a hand grenade lol..putting plastic sheets on pasenger side just incase a mate springs a leak and poops his pants hahaha.

well i got one 20/20 but it been sitting in a tote for around 3 years now, ive had wd-40 on it along with the heads, so i got it out few months back and started to polish it ,even with my old ass eyes and tri focal glasses i could see a little pin hole on one of the rod journals . so i could go another 10 but never run one that low and to old to start now hahahah , odd too the way gas prices and fossil fuel decline has been going you would think the after market prices would go down to just sell anything , oh well it was going to be my last engine build and i guess the last one i built was instead

 

[Madmax]

Agree... long waiting times for parts ive ordered from the states.i think the prices are because of demand for certain items .this bloody war and the kung flu is putting emormous strain on the economy....hey chem ,me and oldy are gonna take over your diary lol hahaha...

 

[chemistry]

Some one should start a topic on called show us your rides, every one seems to have built one at some stage in their lives, some folk more than one. I'll bet between us farmers we've had some nice vehicles over the years.

 

[Madmax]

Ive had some good ones but im afraid if i put pics up it might give me away lol.specially this vehicle i have now .im changing my name soon and going under cover only you guys that have seen my room will know its me on here..

 

[oldskol4evr]

Some one should start a topic on called show us your rides, every one seems to have built one at some stage in their lives, some folk more than one. I'll bet between us farmers we've had some nice vehicles over the years.

hahahaha bro i work on nothing but junk ,i have too im a broke som bitch hahahah reason for bickering about a 200 dollar crank, thats the cheapest i find, even a regrind from a local machine shop is 160, so why not pay 40 bucks more for a new one, hahah these folks have the market sowed up i mean
whats wild is as much as there pushing green and doing away with fossil fuels that these after market prices are still high, seems they would be scrambling to sell everything they got lol
greed is a bitch, once you have it ,it is a drug and you cant kick the habit

 

[chemistry]

Good morning all you tokers and growers, how are you all this fine Saturday morning. All fine here, just finished week six this morning and starting week seven, this is the time I start to look out for mites, mildews and rots, as this is the time I seem to get caught. Its sunny outdoors with a high humidity at the moment, and we all know what that means. So its eagle eye time so we don't end up with a problem of some sort due to over watering or over feeding, by the end of week seven we'll see if anything is present or not, fingers crossed we're in the clear. But, with the weather the way it is at the moment around here, I feel some thing might be on the cards, always the same when the weather is high in humidity and your trying to finish flowering, so we'll see by the end of next week.
Should see some Autumn colours forming soon as the plants start to fade over the next couple of weeks, hoping to be done in the next three weeks, dollar says its five weeks by the time they're chopped and hung. Got some new seed stock to try out, will be putting them under the 400w duel spec bulb for flowering next run, this run is a standard HPS 600w, I'm moving back to 400's due to the price of electric, this will cut my power consumption by a third, not a lot, but its a saving all the same, as I think the power companies will hike up the price of electric again, just before Winter, we know how they operate, despite what they're nice customer services say, they're not on our side, so savings have to be made, I won't be giving up being a grower or a toker, so I'll just have to trick up my grow space to make it perform better, or I'll have to become and outdoor grower instead. Anyway, fancy some orange pics.

Amnesia Lemon.

Chocolate Skunk.

Franco's Lemon Cheese.

Group Shot.

And there we are, all updated, lets see what the next couple of weeks bring us, hopefully no problems, just bigger buds. So if your bored, got five minutes to spare, or just one of those people who have no friends, then pop in next week for more orange pics, or just to see if things go wrong. Until then, just keep tokin folks.

 

[SSgrower]

Lookin good so Far, as I just harvested 5 gals outta 6 started, 1 Hermed on me but it was good experience for me as I caught it early in week 4 of flower when it happened. whew, I was like 6 is too many to water anyway. Lol, what a hobby, Cheers SS

 

[chemistry]

Lookin good so Far, as I just harvested 5 gals outta 6 started, 1 Hermed on me but it was good experience for me as I caught it early in week 4 of flower when it happened. whew, I was like 6 is too many to water anyway. Lol, what a hobby, Cheers SS

Watering is the reason I keep my plant count low, or it becomes less of a hobby and more of a second job.

 

[Madmax]

The muffs looking very nice chem.why dont you undress your girls a little (defol)
and see if that brings your rh down just a fraction or just to b on the safe side .

You might of just jinxed yourself lol..