THCFarmer.com
121,181 Members Log In Register
Log In Register

Help please! is this PM??

  • Thread starter Thread starter Kopper1013
  • Start date Start date
  • Tagged users Tagged users None

Help please! is this PM??

Kopper1013 70 Replies 8,386 Views
Page 4 of 4 · Replies 61–71 of 71
#61
Kopper1013 said:
Like what?

And is this in reference to the 50/50, L.A.B or the potassium bicarbonate?
Click to expand...
Coco Wet, Dr. Bronners Castile Soap, even dish soap will act as surfactants. By lowering the surface tension, they help spread the liquid spray and coat the leaves.
 
Last edited:
#62
Excerpt from "JADAM Organic Farming, The way to Ultra-Low-Cost agriculture"

JWA
 
#63
ritoMox said:
Excerpt from "JADAM Organic Farming, The way to Ultra-Low-Cost agriculture"

View attachment 1280694
Click to expand...
This is really useful info if prepping 132 gal tanks, but not so much for home growers. 😁

www.academia.edu

JADAM Organic Farming: The way to Ultra Low Cost agriculture - Youngsang Cho

Gyeonggi province, Korea. He graduated from Suwon Highschool and Aju University (chemistry), and completed master's degree in horiculture at Chungnam University. Ater compleing his military service at the 706 Special Forces, he started organic
www.academia.edu
 
#64
I have this I’ve been using to help with insects
A823FF61 AA59 4978 8EF5 7116F41C8C26
What would be the appropriate amount to mix in a gallon of water?

I’m assuming I’d use this on the potassium bicarbonate and L.A.B application as you want it to stay put but not necessarily on the 50/50 spray?
 
#65
From a few drops to a teaspoon per gallon? You don't need much. Also check out yucca based stuff.
www.thcfarmer.com

Role of surfacants in soil...i.e. dr. bronners liquid soap

I just wanted someone to school me on using liquid soap like dr. bronners hemp soap as a surfacant. I've heard it helps the water become more available in soil and as a wetting agent in foliar feeding. Does anyone do something like this and if so how much should I use per gallon of water?
www.thcfarmer.com www.thcfarmer.com
Click to expand...
 
#66
#67
effexxess said:
From a few drops to a teaspoon per gallon? You don't need much. Also check out yucca based stuff.
Click to expand...
Bush Doctor's "Sledge Hammer" is a yucca based surfactant. In this case, its being recommended as a flushing agent. However if using only a couple of drops, it should do the trick just fine.

On the plus side, its made by Fox Farm so finding it might be easier in some areas.
 
#68
Kopper1013 said:
I have this I’ve been using to help with insects
View attachment 1280719What would be the appropriate amount to mix in a gallon of water?

I’m assuming I’d use this on the potassium bicarbonate and L.A.B application as you want it to stay put but not necessarily on the 50/50 spray?
Click to expand...
Potassium bicarbonate 99.7% (KHCO3) is also known as potassium hydrogen carbonate or potassium acid carbonate. Potassium bicarbonate is a white, alkaline solid used in fire extinguishers, wine making, to make soft drinks, to neutralise acids and also used as a leavening agent in baking.
It’s naturally present in humans, animals, plants and virtually all living organisms. As a base, potassium bicarbonate is at the high end of the pH scale, 8.0 – 8.6pH.
Potassium bicarbonate is an accepted fungicide in organic farming. As a foliar spray has been found to stop and inhibit the growth of fungal pathogens and the spores (Alternaria blight, apple scab, black spot, blights, botrytis, downy mildews, molds, phytophthora, powdery mildew, and Septoria leaf spot) on many plants and crops. Found to be most effective as a preventative.
It’s very effective on mildews as it uses various modes of action against mildews causing them to desiccate and collapse therefore the mildews having a low resistance to potassium bicarbonate. Plants also benefit form the extra intake of potassium.
Directions for use:
Potassium bicarbonate is a “contact” fungicide, therefore contact needs to be made with infected areas.
Preventative foliar 1g – 3g KHCO3 per litre of rain/dechlorinated water. Spray as a preventative on a fine mist every 10-14 days through the vegatative stage of growth and up to two weeks into the flowering stage of growth.
Heavily Infected plants might require a more aggressive approach 1g-4g KHCO3 per litre or rain/dechlorinated water at 4-7 day intervals misting the entire plant including underside of leaves and stems.
A spreader/wetting agent (eg. JADAM wetting agent at 2ml/1l) added will ensure proper surface coverage and the potassium bicarbonate will be even more affective. Refrain from using a wetting agent about 30 days prior to harvest.
Application without a spreader/wetting agent can be applied and still be very effective. Spray on a very fine mist so droplets hold on the leaf surface. Move around misting evenly returning to where you began to fine mist areas you might have missed. *Do not over spray one area and cause droplets to run, this could lead to the potassium bicarbonate been ineffective.
Application rates above 4g/1l showed signs of pistils browning. Leaf burn on tips of older plants was noticed at the higher dosage. Young seedlings and clones also showed burns on the edges and tips of the leaves.
Application late in flower might be needed when plants are most susceptible to mildews and botrytis. Refrain from using a wetting agent about 30 days prior to harvest.
  • Outdoors foliar spray at the coolest time of the day, early mornings or at sunset. One can foliar spray without a wetting agent after rain while plant is still wet. This will ensure proper coverage as the rain on the plant will act as a spreader helping the KHCO3 make contact with all spores.
  • Indoors foliar spray at lights off with fans off and then put fans back on after foliar spray. If you having high humidity at lights off you can foliar spray during lights on, but will need to either raise, dim lights or use a soft light when foliar spraying and while plants dry. Ensure plants are dry before increasing light intensity again or switching on, wet spots might cause burns.

Storage:
Potassium bicarbonate (KHCO3) should be stored at room temperature, up right and in a sealed container away from moisture. KHCO3 is very hygroscopic and will draw moisture from the air.
Safety and precautions:
Good hygiene and safety practices should be used when handling and working with this material. Good hygiene practices include but are not limited to: wearing suitable gloves and/or eye protection, washing hands and affected skin immediately after handling.
  • Avoid breathing in dust
  • Avoid contact with skin and eyes
  • Wash skin and contaminated clothing and tools after use
HEALTH HAZARDS:
  • Cause eye irritation
  • Cause mild skin irritation
  • Harmful if inhaled
  • May cause respiratory tract irritation
* Potassium bicarbonate is incompatible with all types of water-soluble fertiliser and other chemicals and needs to applied by themselves as a soil drench for correcting low medium ph.
*For the use on plants and crops.
*Keep out of reach of children and animals.
 
#70
Everyone got 2 gallons spray of Hydrogen peroxide/water with a rate of 1cup:1gallon Sunday.
They so far seem to have responded to that. My Potassium Bicarbonate showed up yesterday night after dark so I’m in hopes to apply to the girls today.👍🤞
 
#71
mike1980 said:
Potassium bicarbonate 99.7% (KHCO3) is also known as potassium hydrogen carbonate or potassium acid carbonate. Potassium bicarbonate is a white, alkaline solid used in fire extinguishers, wine making, to make soft drinks, to neutralise acids and also used as a leavening agent in baking.
It’s naturally present in humans, animals, plants and virtually all living organisms. As a base, potassium bicarbonate is at the high end of the pH scale, 8.0 – 8.6pH.
Potassium bicarbonate is an accepted fungicide in organic farming. As a foliar spray has been found to stop and inhibit the growth of fungal pathogens and the spores (Alternaria blight, apple scab, black spot, blights, botrytis, downy mildews, molds, phytophthora, powdery mildew, and Septoria leaf spot) on many plants and crops. Found to be most effective as a preventative.
It’s very effective on mildews as it uses various modes of action against mildews causing them to desiccate and collapse therefore the mildews having a low resistance to potassium bicarbonate. Plants also benefit form the extra intake of potassium.
Directions for use:
Potassium bicarbonate is a “contact” fungicide, therefore contact needs to be made with infected areas.
Preventative foliar 1g – 3g KHCO3 per litre of rain/dechlorinated water. Spray as a preventative on a fine mist every 10-14 days through the vegatative stage of growth and up to two weeks into the flowering stage of growth.
Heavily Infected plants might require a more aggressive approach 1g-4g KHCO3 per litre or rain/dechlorinated water at 4-7 day intervals misting the entire plant including underside of leaves and stems.
A spreader/wetting agent (eg. JADAM wetting agent at 2ml/1l) added will ensure proper surface coverage and the potassium bicarbonate will be even more affective. Refrain from using a wetting agent about 30 days prior to harvest.
Application without a spreader/wetting agent can be applied and still be very effective. Spray on a very fine mist so droplets hold on the leaf surface. Move around misting evenly returning to where you began to fine mist areas you might have missed. *Do not over spray one area and cause droplets to run, this could lead to the potassium bicarbonate been ineffective.
Application rates above 4g/1l showed signs of pistils browning. Leaf burn on tips of older plants was noticed at the higher dosage. Young seedlings and clones also showed burns on the edges and tips of the leaves.
Application late in flower might be needed when plants are most susceptible to mildews and botrytis. Refrain from using a wetting agent about 30 days prior to harvest.
  • Outdoors foliar spray at the coolest time of the day, early mornings or at sunset. One can foliar spray without a wetting agent after rain while plant is still wet. This will ensure proper coverage as the rain on the plant will act as a spreader helping the KHCO3 make contact with all spores.
  • Indoors foliar spray at lights off with fans off and then put fans back on after foliar spray. If you having high humidity at lights off you can foliar spray during lights on, but will need to either raise, dim lights or use a soft light when foliar spraying and while plants dry. Ensure plants are dry before increasing light intensity again or switching on, wet spots might cause burns.

Storage:
Potassium bicarbonate (KHCO3) should be stored at room temperature, up right and in a sealed container away from moisture. KHCO3 is very hygroscopic and will draw moisture from the air.
Safety and precautions:
Good hygiene and safety practices should be used when handling and working with this material. Good hygiene practices include but are not limited to: wearing suitable gloves and/or eye protection, washing hands and affected skin immediately after handling.

  • Avoid breathing in dust
  • Avoid contact with skin and eyes
  • Wash skin and contaminated clothing and tools after use
HEALTH HAZARDS:

  • Cause eye irritation
  • Cause mild skin irritation
  • Harmful if inhaled
  • May cause respiratory tract irritation
* Potassium bicarbonate is incompatible with all types of water-soluble fertiliser and other chemicals and needs to applied by themselves as a soil drench for correcting low medium ph.
*For the use on plants and crops.
*Keep out of reach of children and animals.
Click to expand...
Great information covers all the bases thanks
 
Page 4 of 4 · Replies 61–71 of 71
Back
Top Bottom