Jammin on it with a late/early start

[Bilber]

Now the hardest part is behind me......

..........

 

[Bilber]

Kratky Method....I.

Not sure of the days.....I could check, but....

Still nothing with the little one.....I did top it off with more nutes.....it was almost an inch low......

The bigger one I didn't touch or add.....

What do you mean it takes time to grow......

So far, it's made a believer out of me......

 

[GoldenDragondnw]

Now the hardest part is behind me......

..........

View attachment 2102972View attachment 2102973

Omg she opening! I love seeing the Lil leaf inside the cotys like what do you look like little baby?!?!?!

 

[Bilber]

The one I said was going to be the first to....she doesn't want to go anywhere......she's had a change of ♥ and turned herself around and started to cooperate.....

Just fed......I feed Every time......no just water.......I don't flush, but always run-off......just to clear the waste/salts/buildup......

 

[GoldenDragondnw]

Kratky Method....I.

Not sure of the days.....I could check, but....

Still nothing with the little one.....I did top it off with more nutes.....it was almost an inch low......

The bigger one I didn't touch or add.....

View attachment 2102977View attachment 2102978View attachment 2102979View attachment 2102980

What do you mean it takes time to grow......

So far, it's made a believer out of me......

Hey I'm curious...I just learned how to reuse pellets and I was wondering how often do you reuse the pellets? Have they lasted for more than one run? Do you clean and sanitize them between runs? Sorry for all the questions but I love this method. I'm sure it's a long time in the future for me to experiment. But to have the knowledge beforehand is the goal.

 

[Bilber]

And the lil flo area......neglected much?

Added 2 bagseed candidates......

2 of the older ones so close to touching the lights......

I need more room.......ha....wishful thinking........

 

[GoldenDragondnw]

And the lil flo area......neglected much?

View attachment 2102991View attachment 2102992View attachment 2102993

Added 2 bagseed candidates......

2 of the older ones so close to touching the lights......

I need more room.......ha....wishful thinking........

I like that little gdp it look like it might have a decent cola yet. the strange and unusual hobbit grows. Love watching all your grows man. You give me lots of ideas. Mostly about throwing more seeds in!

 

[Bilber]

Hey I'm curious...I just learned how to reuse pellets and I was wondering how often do you reuse the pellets? Have they lasted for more than one run? Do you clean and sanitize them between runs? Sorry for all the questions but I love this method. I'm sure it's a long time in the future for me to experiment. But to have the knowledge beforehand is the goal.

I've never used them before, but......

I rinsed with my veg nute feed, letting them soak for a day, and repeated a couple times.....getting rid of the dust and small particles......

Then, when the solution was clear, without any dust particles, I put them in the container with the plant and filled the sole up to halfway up to the plants cup.......

After every use, which will be after, don't laugh, harvest, you do the same thing as the beginning steps......

Once they've been used, treat them like they were straight out of the package and soak, clean, rinse....

If that makes sense.....

From what I've read, these hydrotons/pellets ca be reused indefinitely if you clean them after every use.....

They eventually will break down and then you just replace them after the soak, rinse, repeat process.....

Don't think about it , just get one setup......

 

[Bilber]

I like that little gdp it look like it might have a decent cola yet. the strange and unusual hobbit grows. Love watching all your grows man. You give me lots of ideas. Mostly about throwing more seeds in!

More seeds to start a Kratky run!

 

[GoldenDragondnw]

I've never used them before, but......

I rinsed with my veg nute feed, letting them soak for a day, and repeated a couple times.....getting rid of the dust and small particles......

Then, when the solution was clear, without any dust particles, I put them in the container with the plant and filled the sole up to halfway up to the plants cup.......

After every use, which will be after, don't laugh, harvest, you do the same thing as the beginning steps......

Once they've been used, treat them like they were straight out of the package and soak, clean, rinse....

If that makes sense.....

From what I've read, these hydrotons/pellets ca be reused indefinitely if you clean them after every use.....

They eventually will break down and then you just replace them after the soak, rinse, repeat process.....

Don't think about it , just get one setup......

I have to get my garage finished first for my real runs. Then I'll play with the kratky method. I finally got power so now it's just getting everything in. Hopefully I win this other light and then I don't have to worry about lights. That was my main concern. The lights. Getting some. I win this 2nd one so I don't gotta buy one.
your encouragement is contagious! I'll be having plants everywhere if I didn't think before I just plunged into it.
But I'm defo looking at the method might try it while I'm doing my real run in the garage. I'll have to check your setup again and make a checklist on what I need to get. Defo the pellets..
And a container to put em in....will they work in aeropots? I've not used pellets so I have lots of questions.

Thank you for answering them. I appreciate it.

 

[Bilber]

I've never used the aeropots, but as long as there is a good lip on the top so it doesn't fall into the other container, I don't see why not.....

Shit.....I'm using a applesauce container and a Folgers coffee container......

GNick grew a plant out of a sock.....

You can pretty much grow in anything.....

So addictive this hobby is.....

 

[Captspaulding]

I've never used the aeropots, but as long as there is a good lip on the top so it doesn't fall into the other container, I don't see why not.....

Shit.....I'm using a applesauce container and a Folgers coffee container......

GNick grew a plant out of a sock.....

You can pretty much grow in anything.....

So addictive this hobby is.....

Surprised South Park hasn’t made an episode where Randy plants one In his wife’s ass or some ridiculous shit hahahaha. It’s true. You can use an old toilet ffs! I’m down to drop some bombs hahahaha

 

[Bilber]

DAMNNNNNN....

Does anybody know how to fix stupid?

My veg light......I fucked up......

Set the timer for 16/6........

That's what is wrong.......

I checked and double checked! Arghhh....

My Skywalker has been hit......montercropped or whatever you want to call it.....Damn.......

I've been wondering what the f*÷k was going on......so disappointed......

Fixed and moving forward......but DAMN...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[Putthataway]

DAMNNNNNN....

Does anybody know how to fix stupid?

My veg light......I fucked up......

Set the timer for 16/6........

That's what is wrong.......

I checked and double checked! Arghhh....

My Skywalker has been hit......montercropped or whatever you want to call it.....Damn.......

I've been wondering what the f*÷k was going on......so disappointed......

Fixed and moving forward......but DAMN...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

From my experience, program prior to consumption. I also like to check on the light. I have noticed when I switch to flower my timer has the correct times set switches on at the previous veg set up. For example I always have the same off time off. 10pm. I switch from 4 am start to 10am. I noticed it was on before 10 am. I had to switch through the cycles for it to work correctly. Had the same problem with the ac affinity controls, thing had the right time settings, but you couldn’t have it on certain screens. Example here I turned up the light intensity after getting the timer to work properly and left it on the screen for the light intensity. Timer didn’t work lol. Turning it off or on.

 

[Bilber]

From my experience, program prior to consumption. I also like to check on the light. I have noticed when I switch to flower my timer has the correct times set switches on at the previous veg set up. For example I always have the same off time off. 10pm. I switch from 4 am start to 10am. I noticed it was on before 10 am. I had to switch through the cycles for it to work correctly. Had the same problem with the ac affinity controls, thing had the right time settings, but you couldn’t have it on certain screens. Example here I turned up the light intensity after getting the timer to work properly and left it on the screen for the light intensity. Timer didn’t work lol. Turning it off or on.

Program prior to consumption!!!!!!!!!

That is the most important key!

Thank you for the great laugh I'm having....

Yeah.....I even thought it was good even after I thought it was good.....

Wayyyy too funny.....lesson learned.....

Thank you Putt....great example you have shown me......

 

[GoldenDragondnw]

Well...Hopefully disaster averted! Just gonna have a short stumpy jedi...like yoda

 

[Bilber]

Yeah....my bad.....

I really thought it was because I changed the lights with a different k factor/spectrum......

Lesson learned......

I love learning......I just wish I learned easier/faster......

 

[GoldenDragondnw]

Yeah....my bad.....

I really thought it was because I changed the lights with a different k factor/spectrum......

Lesson learned......

I love learning......I just wish I learned easier/faster......

Yea I'm forever learning! keep on keeping on my friend.

 

[Justlovetogrow]

16/6shouldn’t bother em mate just a bit slower veg is all

 

[Bilber]

16/6shouldn’t bother em mate just a bit slower veg is all

Which really helps me if that's the case, but 2 plants started to flower.....

I'll reveg my baby and hope like he'll it's good......

I've revegged 3 plants so far and it worked great.....

Hopefully the Skywalker pulls it off to make 4.....arghhhh....such an awesome high.....smell....smoke.....it's a definite keeper to breed with.....

That has been my hope anyways....

Thank you for the encouragement Just....