THCFarmer.com
121,172 Members Log In Register
Log In Register

THE TRAINWRECK. Brought to you by thcfarrmer…..

I had one a long time ago. Tasted like a funky garlic pepper. I had one called Garlic Breath more recently... not so much garlic, but still spicy. Haha gotta hunt them phenos! yeh man for sure. ill have a good look around to see if i can find any similar.
Home › Forums › Medical Cannabis Cultivation › Grow Diaries › THE TRAINWRECK. Brought to you by thcfarrmer…..
Grow diary eligible · Medical Cannabis Cultivation

THE TRAINWRECK. Brought to you by thcfarrmer…..

by Captspaulding · Started
1d
Running
0
Updates
95,543
Replies
0
Images
Overview Updates 0 Discussion 95,543 Gallery 0 Harvest
Discussion below · 95,543 replies
Page 1266 of 4778 · Replies 25,301–25,320 of 95,544
Status
Not open for further replies.
#25,303
Grimm Truffles is getting more purple this week.

Screenshot 20240223 093935 Gallery
20240223 072236
 
#25,306
Killer German strains incoming.

internationalcbc.com

Germany Votes To Legalize Cannabis For Adults

Over two years after Germany's current governing coalition was elected and announced plans to pass a national adult-use cannabis legalization measure, members of the German Bundestag have officially approved the adult-use legalization bill (CanG).
internationalcbc.com internationalcbc.com
 
#25,307
Hey to you all,
how do you guys go about "detachable" Drivers from our Led Fixtures?
Went with the KS3000 from ViparSpectra and somehow missread/remember, thought the Driver can be mounted onto the Fixture if wanted but that doesnt seem to be the case and now im a bit puzzled on where and how to place it. Kinda want to have it in the Tent for now until Temp rises outside but not sure how to properly and most important safetly place it into the Tent. And once Temp rises i have no clue where to place it so it doesnt just lay onto the floor.
please lmk how you guys handle it usually and if you get pictures that would be even more appreciated, guess i can just get a tiny table for outside the Tent but as space is a bit limited maybe you guys came up with something more clever.
 
#25,308
ChuckFinnl3y said:
Hey to you all,
how do you guys go about "detachable" Drivers from our Led Fixtures?
Went with the KS3000 from ViparSpectra and somehow missread/remember, thought the Driver can be mounted onto the Fixture if wanted but that doesnt seem to be the case and now im a bit puzzled on where and how to place it. Kinda want to have it in the Tent for now until Temp rises outside but not sure how to properly and most important safetly place it into the Tent. And once Temp rises i have no clue where to place it so it doesnt just lay onto the floor.
please lmk how you guys handle it usually and if you get pictures that would be even more appreciated, guess i can just get a tiny table for outside the Tent but as space is a bit limited maybe you guys came up with something more clever.
Click to expand...

I have mine hung on the inside of the tent by cable ties. When the weather warms up it's nice to have the option to move it outside. *yes I gave up on cable management since I'm always moving stuff around*

PXL 20240223 190940584
 
#25,309
Leoman said:
I have mine hung on the inside of the tent by cable ties. When the weather warms up it's nice to have the option to move it outside. *yes I gave up on cable management since I'm always moving stuff around*
Click to expand...
Sweet thanks 👊 Nice to see your using 4 Ratchets instead of the 2 provided, wanted to do that aswell to get some more space out of it def. ordering some soon 👍
Whats your thoughts on hanging it vertical vs horizontal ? kinda want to save as much height as possible but if i hang it directly horizontal under the roof im not sure how much heat will just be sucked away by the duct fan before it can dissipate into the Tent.
 
#25,310
ChuckFinnl3y said:
Hey to you all,
how do you guys go about "detachable" Drivers from our Led Fixtures?
Went with the KS3000 from ViparSpectra and somehow missread/remember, thought the Driver can be mounted onto the Fixture if wanted but that doesnt seem to be the case and now im a bit puzzled on where and how to place it. Kinda want to have it in the Tent for now until Temp rises outside but not sure how to properly and most important safetly place it into the Tent. And once Temp rises i have no clue where to place it so it doesnt just lay onto the floor.
please lmk how you guys handle it usually and if you get pictures that would be even more appreciated, guess i can just get a tiny table for outside the Tent but as space is a bit limited maybe you guys came up with something more clever.
Click to expand...
I removed my for heat reasons and have on a skateboard . I figured it would have a little bit of air flow and seemed safer than mounting it to the wall.
IMG 0770
 
#25,311
Putthataway said:
I removed my for heat reasons and have on a skateboard . I figured it would have a little bit of air flow and seemed safer than mounting it to the wall.View attachment 2125675
Click to expand...
😃 Nice idea, im also kinda on the fence about hanging it onto the Wall and limit the potential Airflow. Got Carpet in my Lung room and dont rly want to lay it down there guess it wouldnt be too bad just for that but i dont want to be tempting fate and bump into it while wandering around the Tent after some 420 time.
 
#25,312
ChuckFinnl3y said:
Sweet thanks 👊 Nice to see your using 4 Ratchets instead of the 2 provided, wanted to do that aswell to get some more space out of it def. ordering some soon 👍
Whats your thoughts on hanging it vertical vs horizontal ? kinda want to save as much height as possible but if i hang it directly horizontal under the roof im not sure how much heat will just be sucked away by the duct fan before it can dissipate into the Tent.
Click to expand...

It will actually fit between the tent and the light. Not much clearance but it fits. I had it like that when the light was higher next to the driver. That's when the plants were on buckets so everything was higher.
 
#25,313
IMG 0768
Finally got the light working properly. I was trying to mount the drivers incorrectly. My dumb ass didn’t realize that the light is folded. This stomach thing has me tarded. I called ac affinity and she was like did you unfold it? 😂🤣😁🫠 I am like ohhhh. One thing about their cord set is it looks like they want them mounted externally. With the power cord set up length max height is going to be like 4 feet without some sort of adapter.
 
#25,314
ChuckFinnl3y said:
😃 Nice idea, im also kinda on the fence about hanging it onto the Wall and limit the potential Airflow. Got Carpet in my Lung room and dont rly want to lay it down there guess it wouldnt be too bad just for that but i dont want to be tempting fate and bump into it while wandering around the Tent after some 420 time.
Click to expand...
The reason I chose a skateboard is because of the unique u in the wood. Right now the driver is tilted because of the light being maxed. At lower heights it is flat and you have air flow between the wood and driver still .
 
#25,315
Putthataway said:
Finally got the light working properly. I was trying to mount the drivers incorrectly. My dumb ass didn’t realize that the light is folded.
Click to expand...

I was wondering why you had it on with it folded in half. Thought maybe you were testing it out and didn't bother. lol
 
#25,317
Leoman said:
I was wondering why you had it on with it folded in half. Thought maybe you were testing it out and didn't bother. lol
Click to expand...
I was testing it out. I got the flu or food poisoning. I am tarded like vertigo and everything I saw the hinges that should have been my first clue, instead I was just trying to get her out of my living room before my dog pees on it. I am still sick just not as tarded.
 
#25,320
Uhhg. Today was ruff.
My Aussie had a really bad seizure this am.
Man I’m really optimistic though
He’s back on gabapentin and a couple other things.
He is wooped 😞

Love your furries folks. 👊🏻🤡
 
Status
Not open for further replies.
Page 1266 of 4778 · Replies 25,301–25,320 of 95,544
Back
Top Bottom