Log In Register

THE TRAINWRECK. Brought to you by thcfarrmer…..

Damnit!😂 https://images.craigslist.org/00j0j_hHpiCiDzKVq_0CI0t2_1200x900.jpg It’s a poulan. Kill it with a hail of gun fire. The worst carb fuel setups on literally every slammed part of every fucking machine down to hedge clippers. Who the fuck uses...
Home Forums Medical Cannabis Cultivation Grow Diaries THE TRAINWRECK. Brought to you by thcfarrmer…..
Grow diary eligible · Medical Cannabis Cultivation

THE TRAINWRECK. Brought to you by thcfarrmer…..

by Captspaulding · Started
1d
Running
0
Updates
95,543
Replies
0
Images
Discussion below · 95,543 replies
Page 1857 of 4778 · Replies 37,121–37,140 of 95,544
Status
Not open for further replies.
It’s a poulan.


Kill it with a hail of gun fire. The worst carb fuel setups on literally every slammed part of every fucking machine down to hedge clippers.


Who the fuck uses plastic internals and fitting for a fuel syalstem, gas is a low key solvent.
Fuckingncriminal pricks making shit that they k ow damned well will fail, so they can sell over priced replacement parts.

If I ever see poulan walking alone, he’s going into a hole and set on fire 🤣
 
It’s a poulan.


Kill it with a hail of gun fire. The worst carb fuel setups on literally every slammed part of every fucking machine down to hedge clippers.


Who the fuck uses plastic internals and fitting for a fuel syalstem, gas is a low key solvent.
Fuckingncriminal pricks making shit that they k ow damned well will fail, so they can sell over priced replacement parts.

If I ever see poulan walking alone, he’s going into a hole and set on fire 🤣
And thats why I posted! Saved me the hassle of figuring that out all on my own! Or buying it and you guys never letting me live it down! 😂 on to the next! : ) john deer? : )
 
Im looking at one of those boxes with a screen that you put your trim on and shake. Must take forever and still miss alot of stuff, right?
Not if you freeze the material, and use dried ice to bounce it in the work bag.
I’ve takilen what was left over before to bho blast to get any leftovers. I learned the screens get damn near 95% of the god pods
If you take your time, and work in a really cold room, g2g

I know a lot of us prefer to do it in the winter to help in that regard.
 
And thats why I posted! Saved me the hassle of figuring that out all on my own! Or buying it and you guys never letting me live it down! 😂 on to the next! : ) john deer? : )
I have a 1986 John deer that runs laps around my husqevarna from 2015x
Parts are always available and reliable.
Def a good choice imo.
 
So last night was my flip goal. I put it off until today. The plants were on and off with me trying to increase the light intensity and really crashed when I tried out the full 1000k. Burnt a Cali blues leave and a purest indica. Pulled back to 5 then 4 then 3 bouncing between 2&3 now. The temp gets up during the latter part of the day in the 80s. I turned the humidifier off on Tuesday after noticing the hvac was running rather long without taking a break. The condensation pipe outside was watering the earth outside and it’s not humid. That seems to have corrected the lengthy running and the puddling from excessive moisture. For those of you that don’t know hvac removes moisture. These newer models have all kinds of different sensors and it seems like running equipment that cools ( separate ac, humidifier, etc )throws the values from the sensor creating excess running and energy use from my personal experience. I can also tell you that I know the vents are sucking up the water. If use tap on my old hvac it could clog the air filters in a few days creating a screaming whistle. Have to use r.o. My newest finding today was high humidity in the tent again overnight even though they are due for water on the ac affinity app and controller. My hydrometer was 10 degrees lower than what it is reading. The 2x4 tent hydrometer also was about 10 off last week. Tried to check but the battery is dead today. Flipped on the ac affinity humidifier and that starts running showing a 8 or 9 % discrepancy what the ac affinity is showing. I decided to inspect the three probes which are hanging about the same location and rub them looking for any debris. I don’t see anything but it immediately dropped down ten percent. It’s like 5% or so off right now I don’t know what is going on with that but it’s had me chasing a wild goose that doesn’t exist.
IMG 1811
^left rear still ugly rippled leaves. The right rear ugly problem still persists.
IMG 1807
^ with her she is green underneath those yellow leaves. I am out of space and patience dealing with them. I need to water them. I suspect that plant’s mother was the one who finished almost completely white. So anyway the deed is done I have flipped the switch.
 
It’s a poulan.


Kill it with a hail of gun fire. The worst carb fuel setups on literally every slammed part of every fucking machine down to hedge clippers.


Who the fuck uses plastic internals and fitting for a fuel syalstem, gas is a low key solvent.
Fuckingncriminal pricks making shit that they k ow damned well will fail, so they can sell over priced replacement parts.

If I ever see poulan walking alone, he’s going into a hole and set on fire 🤣
f*ck poulan lmao. First brand of tools I was buying years ago. Never again.

I have a poulan electric chainsaw in the basement, no idea where it came from, was probably abandoned by the old squatters.

During tool show and tell yesterday, I almost made a quick video of myself marketing that poulan on the patio. It may even work, but idgaf. It's trash. Already know it's trash.

In my household, you spit on the ground after you say poulan.
 
f*ck poulan lmao. First brand of tools I was buying years ago. Never again.

I have a poulan electric chainsaw in the basement, no idea where it came from, was probably abandoned by the old squatters.

During tool show and tell yesterday, I almost made a quick video of myself marketing that poulan on the patio. It may even work, but idgaf. It's trash. Already know it's trash.

In my household, you spit on the ground after you say poulan. Bro, the lines they use start to split immediately, let me guess is it the 18in blade? The. Yes Throw it the fuck out.
The shit you have to do to just hook the lines up to the primer is fucking insane. I hate their chainsaws bro,
 
So last night was my flip goal. I put it off until today. The plants were on and off with me trying to increase the light intensity and really crashed when I tried out the full 1000k. Burnt a Cali blues leave and a purest indica. Pulled back to 5 then 4 then 3 bouncing between 2&3 now. The temp gets up during the latter part of the day in the 80s. I turned the humidifier off on Tuesday after noticing the hvac was running rather long without taking a break. The condensation pipe outside was watering the earth outside and it’s not humid. That seems to have corrected the lengthy running and the puddling from excessive moisture. For those of you that don’t know hvac removes moisture. These newer models have all kinds of different sensors and it seems like running equipment that cools ( separate ac, humidifier, etc )throws the values from the sensor creating excess running and energy use from my personal experience. I can also tell you that I know the vents are sucking up the water. If use tap on my old hvac it could clog the air filters in a few days creating a screaming whistle. Have to use r.o. My newest finding today was high humidity in the tent again overnight even though they are due for water on the ac affinity app and controller. My hydrometer was 10 degrees lower than what it is reading. The 2x4 tent hydrometer also was about 10 off last week. Tried to check but the battery is dead today. Flipped on the ac affinity humidifier and that starts running showing a 8 or 9 % discrepancy what the ac affinity is showing. I decided to inspect the three probes which are hanging about the same location and rub them looking for any debris. I don’t see anything but it immediately dropped down ten percent. It’s like 5% or so off right now I don’t know what is going on with that but it’s had me chasing a wild goose that doesn’t exist.View attachment 2211082^left rear still ugly rippled leaves. The right rear ugly problem still persists.View attachment 2211089^ with her she is green underneath those yellow leaves. I am out of space and patience dealing with them. I need to water them. I suspect that plant’s mother was the one who finished almost completely white. So anyway the deed is done I have flipped the switch.
Are they hung above? Or at canopy height?
 
I don't know that one but there's one I see advertised that I NEED. Frickin Lazer vape. Got a bong end and/or a hose. I NEED THIS🤣
Get you a hash straw
So last night was my flip goal. I put it off until today. The plants were on and off with me trying to increase the light intensity and really crashed when I tried out the full 1000k. Burnt a Cali blues leave and a purest indica. Pulled back to 5 then 4 then 3 bouncing between 2&3 now. The temp gets up during the latter part of the day in the 80s. I turned the humidifier off on Tuesday after noticing the hvac was running rather long without taking a break. The condensation pipe outside was watering the earth outside and it’s not humid. That seems to have corrected the lengthy running and the puddling from excessive moisture. For those of you that don’t know hvac removes moisture. These newer models have all kinds of different sensors and it seems like running equipment that cools ( separate ac, humidifier, etc )throws the values from the sensor creating excess running and energy use from my personal experience. I can also tell you that I know the vents are sucking up the water. If use tap on my old hvac it could clog the air filters in a few days creating a screaming whistle. Have to use r.o. My newest finding today was high humidity in the tent again overnight even though they are due for water on the ac affinity app and controller. My hydrometer was 10 degrees lower than what it is reading. The 2x4 tent hydrometer also was about 10 off last week. Tried to check but the battery is dead today. Flipped on the ac affinity humidifier and that starts running showing a 8 or 9 % discrepancy what the ac affinity is showing. I decided to inspect the three probes which are hanging about the same location and rub them looking for any debris. I don’t see anything but it immediately dropped down ten percent. It’s like 5% or so off right now I don’t know what is going on with that but it’s had me chasing a wild goose that doesn’t exist.View attachment 2211082^left rear still ugly rippled leaves. The right rear ugly problem still persists.View attachment 2211089^ with her she is green underneath those yellow leaves. I am out of space and patience dealing with them. I need to water them. I suspect that plant’s mother was the one who finished almost completely white. So anyway the deed is done I have flipped the switch.
If you have any old vacuum hose extensions you can put those together to water hard to reach plant. Add. A funnel to fill and booooooomuhfuckinyaaaaaaaah
 
woulda been a great opportunity to show off the ball pene i used to make that crappy machete. That one's Matco
I like kukri machetes ka bar to the front
Tanto
And the og
 

Attachments

  • image.jpg
    image.jpg
    151.4 KB · Views: 9
  • image.jpg
    image.jpg
    191.1 KB · Views: 9
  • image.jpg
    image.jpg
    202.2 KB · Views: 11
  • image.jpg
    image.jpg
    190.8 KB · Views: 11
Are they hung above? Or at canopy height?
IMG 1813
White one is hydrometer and the the black ones are the ac affinity. Keep in mind the ac affinity humidifier is in correspondence with the hydrometer. My other hydrometer was about ten off from the controller last week the battery is dead so at the moment I can’t see what it thinks. My personmeter doesn’t think it feels like over 50% humidity.
 
I have a 1986 John deer that runs laps around my husqevarna from 2015x
Parts are always available and reliable.
Def a good choice imo.
Now it’s just finding one where someone doesnt know what they got! 😂 or where its not going to cost me more to fix it than it is to buy it, its a deer maybe it would be worth it though. Think your deer has enough torque to plow a few inches of snow? Can you pull stuff with it?
 
Now it’s just finding one where someone doesnt know what they got! 😂 or where its not going to cost me more to fix it than it is to buy it, its a deer maybe it would be worth it though. Think your deer has enough torque to plow a few inches of snow? Can you pull stuff with it?
Oh definitely, I have bucket attachment, my folks gave it to me when I moved them to Florida. It useless here. Check out the place it cut for years, handled this spot like nothing. Also has hook ups for a really nice pull behind trailer .
It eats hills like nothing, took care of my folks driveway with ease after snowfall.
 

Attachments

  • IMG_0109.jpeg
    IMG_0109.jpeg
    384.9 KB · Views: 10
  • IMG_0108.jpeg
    IMG_0108.jpeg
    346.9 KB · Views: 9
  • IMG_0107.jpeg
    IMG_0107.jpeg
    384.1 KB · Views: 8
  • IMG_0110.jpeg
    IMG_0110.jpeg
    372.2 KB · Views: 8
  • 65119706197__A80AF023-4250-4333-9D21-D91C7F48B182.jpeg
    65119706197__A80AF023-4250-4333-9D21-D91C7F48B182.jpeg
    262.6 KB · Views: 9
Now it’s just finding one where someone doesnt know what they got! 😂 or where its not going to cost me more to fix it than it is to buy it, its a deer maybe it would be worth it though. Think your deer has enough torque to plow a few inches of snow? Can you pull stuff with it?
There is a sucker for every suit.
You’ll find a useful idiot sooner than later hahaaha
 
There is a sucker for every suit.
You’ll find a useful idiot sooner than later hahaaha
Hahahaha! I only feel kind of bad because I can definitely be that useful idiot, so it’s up to me to pay attention to alternative motives : ) got to watch your own right? : )
 
View attachment 2211092White one is hydrometer and the the black ones are the ac affinity. Keep in mind the ac affinity humidifier is in correspondence with the hydrometer. My other hydrometer was about ten off from the controller last week the battery is dead so at the moment I can’t see what it thinks. My personmeter doesn’t think it feels like over 50% humidity.
Yeah I would def get it up some that’s most likely why there is a difference in readings homie. I try to hang them in the most ambient spot to get the most clear reading,
 
Status
Not open for further replies.
Page 1857 of 4778 · Replies 37,121–37,140 of 95,544
Back
Top Bottom