What Are You Smoking?

[Beazy]

A lil’ Clusterfunk before dinner

 

[Motley2]

Drool

I need to cut the ice in the fridge down to size and make some bubble … yum

I can't remember who or where I read it many years ago but they said " Marijuana is the bread and Hashish is the cake" I love cake!

 

[figolus]

M-kush

 

[Motley2]

Enjoying some Bubble OG by LIT tonight was a joy to grow even better to smoke tasty and potent now wheres those Cheetos

 

[Thatoneguyyouknow_]

Enjoying some Bubble OG by LIT tonight was a joy to grow even better to smoke tasty and potent now wheres those Cheetos

That trichome.coverage is simply absurd. Wow lol


I'm smoking on Point Break CBG. Is a roughly 1:1 THC:CBG allegedly. I got an S1 from the grower going too.

Not the frostiest, or the smelliest, but dense resin packed buds. It's not the strongest either, but man it's just like smoking a damn good mood

 

[BloomBard]

those buds with a great vibe can be rewarding.

 

[leroygreen]

Updated pics for week

 

[Redneckx]

Made myself a nice bit of Orange Bud 0.2 Trim hash to enjoy this evening

Incredible!!
If my current run goes well I may want to make some hash too, which coarse grade did you use and what is important to get a ball like you?
Thought about bubble hash but tbh I don't want this mess..

 

[Motley2]

That trichome.coverage is simply absurd. Wow lol


I'm smoking on Point Break CBG. Is a roughly 1:1 THC:CBG allegedly. I got an S1 from the grower going too.

Not the frostiest, or the smelliest, but dense resin packed buds. It's not the strongest either, but man it's just like smoking a damn good mood

Cheers she is a frosty one for sure and not just a looker either got great potency and flavour too. Some flower can look the bees knees and have little to no punch i found Oreos to be in this category. Also the opposite can be true can look very ordinary and knock your socks off I had a Durban that looked like ditch weed brown and unappealing but was almost psychedelic in effect.

 

[Motley2]

Incredible!!
If my current run goes well I may want to make some hash too, which coarse grade did you use and what is important to get a ball like you?
Thought about bubble hash but tbh I don't want this mess..

I think everyone should make hash its so satisfying to turn a bag of trim/larf, essentially trash into some super fine hashish of course using high grade flower will improve quality massively. I use a simple hash shaker with a changed out Synthetic 100 U mesh as the one it comes with is 120-140 U and quality wasn't top unless worked very gently. Tips get your material crispy dry( only use sugar leaf and larfy buds not water leaf) I have found that using fresh dried material far better in terms of final product over older material.Freeze the material i find splitting it up into small portions that can be worked in one go very helpful. Work fast shake first then a gentle working with a stirrer I use a small metal torch that can also be put in freezer. I work the sift by hand to make a nice homogenous ball and find working anything over 10 grams is very hard so tend to make a batch and work it easier to amalgamate a few balls together after to make a big temple ball if you can resist the urge to smoke ot as soon as its sifted!

Online Sale of Hash Hash Shaker. S, L, XL models

Buy Hash Shaker (Kief) at Alchimia Grow Shop

www.alchimiaweb.com

After a couple of goes can really turn out high end product the less you work the material the higher the grade you get a feel for it I have been using this technique for twenty years simple and easy. Drysift in my opinion is far tastier than water hash and less hassle.

 

[Itscheese94]

got a little runtz bud, and some hash, hash tastes like a zesty orange

 

[BudBallet]

You’ve got some tasty sessions.

 

[Motley2]

Enjoying some Orange Bud 0.2 this sunny afternoon happy fruity tasty smoke going down lovely with a few beers

 

[RootFarmer]

Sour Apple Kush

Jelly Breath......inside a nice little nug

 

[Redneckx]

I think everyone should make hash its so satisfying to turn a bag of trim/larf, essentially trash into some super fine hashish of course using high grade flower will improve quality massively. I use a simple hash shaker with a changed out Synthetic 100 U mesh as the one it comes with is 120-140 U and quality wasn't top unless worked very gently. Tips get your material crispy dry( only use sugar leaf and larfy buds not water leaf) I have found that using fresh dried material far better in terms of final product over older material.Freeze the material i find splitting it up into small portions that can be worked in one go very helpful. Work fast shake first then a gentle working with a stirrer I use a small metal torch that can also be put in freezer. I work the sift by hand to make a nice homogenous ball and find working anything over 10 grams is very hard so tend to make a batch and work it easier to amalgamate a few balls together after to make a big temple ball if you can resist the urge to smoke ot as soon as its sifted!

Online Sale of Hash Hash Shaker. S, L, XL models

Buy Hash Shaker (Kief) at Alchimia Grow Shop

www.alchimiaweb.com

After a couple of goes can really turn out high end product the less you work the material the higher the grade you get a feel for it I have been using this technique for twenty years simple and easy. Drysift in my opinion is far tastier than water hash and less hassle.

Yea nailed it.
Great advices, I will keep in mind!
Already ordered one and got some trim left in the freezer a couple month ago. Just need a synthetic 100 U mesh.
Thanks for the link, the freebies are nice as well

 

[Green420]

Looks tasty!

 

[RootFarmer]

got a little runtz bud, and some hash, hash tastes like a zesty orange
View attachment 2224277

Where I was living in the early 80s flower was hard to find but hash was everywhere. My brother's roommate had big ass blocks of it. Like a couple of Ks each. He'd just carve me off a big chunk to go when I would come hang out. I would've given my right arm for some flower. Lol Wouldn't touch the stuff for a long toime after flower started coming around again.

I store my crop for up to a year or more so do a minimal trim to protect the buds.

Terp bag to jar then when ready to smoke I just break off any leaf and it goes in the pile with the "toaster leavins"...ground flower that might fall when filling a cone or bong.

Ground flower gets keifed. And the toaster leavins get strained to remove debris then keifed. It gets pressed in the bottom of the grinder occasionally and after I smoke my way through the flower I have a decent hash puck. I started this batch in Oct-Nov '23 IIRC.

After the stuff from the tray gets keifed it gets stored for use in baking.

 

[Motley2]

Yea nailed it.
Great advices, I will keep in mind!
Already ordered one and got some trim left in the freezer a couple month ago. Just need a synthetic 100 U mesh.
Thanks for the link, the freebies are nice as well

Cheers. No worries I have used a couple to death and was always pleased with the results with original screen but put a blim burn through last one and couldn't find a replacement so ordered the 100u synthetic mesh from a painting/ screen printing site. I would give the one it comes with a go and just freeze and shake tap tap tapping the sides then top after shaking also helps. Let us know how you get on with it

 

[Redneckx]

Cheers. No worries I have used a couple to death and was always pleased with the results with original screen but put a blim burn through last one and couldn't find a replacement so ordered the 100u synthetic mesh from a painting/ screen printing site. I would give the one it comes with a go and just freeze and shake tap tap tapping the sides then top after shaking also helps. Let us know how you get on with it

Alright I'll try the orginal screen first.
Did you get a round screen from the painting store or did y cut that through to make it fit in?
Guess my trim wasn't the best also not as frosty as it can but I'll shake that through and will be happy for a little kief.
I'll let ya know how it turns out

 

[Motley2]

Alright I'll try the orginal screen first.
Did you get a round screen from the painting store or did y cut that through to make it fit in?
Guess my trim wasn't the best also not as frosty as it can but I'll shake that through and will be happy for a little kief.
I'll let ya know how it turns out

I bought a 1 M piece(Amazon paint filter/home brew filter most stock a variety of micron sizes) and cut a square out,the sifter comes apart with a bit of persuasion it's like a sleeve top fits in bottom you put mesh over bottom piece and slide top on. I find it useful to chop the trim up a bit in the bag so it's all similar consistency you will tend to find the bottom of the bags gives highest yield and tapping aswell as shaking gives better returns the Mrs gets annoyed at me when hash making " do you have to keep tapping that thing!"