THE TRAINWRECK. Brought to you by thcfarrmer…..

[Mikedin]

I gotta tell you, dude Nick uses a brand that I have been meaning to get myself ever since I saw them every bag instead of the screen being just on the bottom, the whole bag is the screen that would make the entire process much faster for each subsequent mix I can’t remember the name of them, but I’ve been using bubble bag dude for a while now because they are built really well There are times that I’ve maybe gotten a little aggressive towards the end of doing you a long days at a time runs where I thought I was gonna fuck those bags up and I would always dump them out, clean them and take a look at everything I have never once popped a thread on any of their bags. What ends up happening with me is the tool that I used to clean the actual screens themselves. It starts to fry the screens and I mean the more you clean them overtime you know it’s their susceptible to it and I clean them in bowls of ice water to try and make them last longer and it’s a whole heck of a lot easier to get any type of cannabis particulates out of them that way, but sometimes you know it’s just the only way to do it to get them flowing again unless you you know do all your mixes and pulls in an igloo, but regardless of all that man, they’re pretty solid dude their make up are great all the bags can take the beating, but I use a soft bristle toothbrush, some elbow grease and a loathing. I want to say the last set that I bought from them was in 2016. Yeah they’re almost 10 years old at this point and the only reason why I wanna buy one different is not because of some type of you know manufacturer defect or a failure in their equipment. It’s just because those bags Nick have make way too much sense. If I remember right, they’re called press club.
And the cool thing about those as well as you know if you remember and you’re at the spot to buy it, I have bounced dry ice through them numerous times numerous times to do you know cold induced dry sifts and they take that well and that dry ice can be pretty hard on shit so I mean yeah I would hit up @GNick55 for that brand that he fucks with though to check it out and compare builds and you know, maybe a few reviews yeah, press club, im failry certain anyway.
Man, I’ve been meaning to do that for a while now I totally forgot about that. Shit I’m just stubborn though. I have a hard time replacing things that aren’t necessarily shit or justify a new purchase the bubble bag dude bags are also good to dry flowers regardless of micron count your weather permittin of coarse. My only real gripe with the bubble bag dude shit is that they’re modeled to be slid it into a 5 gallon buddy bucket or Lowe’s bucket, etc. why the fuck they would give you drawstrings that do not lock when pulled to keep them from sliding into the bucket when you put weight in them, blows my mind and on top of that You know, they make them too loose, almost for almost every general application that you can buy from any store here yeah I kinda have to come up with your own little system in order to lock them in the place especially after you’ve been working in them for a while and they’re wet. They just keep on pulling themselves down in that damn Bucket And if you’re not on top of keeping your water, absolutely frigid that’s part of the reason those stirs and pools and runs can take so long because even slight warming temperature changes cannabisoils will start to clog the damn nets, but being where I am kind of makes things a bitch because it’s just hot here a lot of the time all year and if you live in a house with a concrete slab, that is your foundation and single floor, the amount of heat that can radiate through it even if it’s just a sunny day in early February and it’s like 45° outside it’s just something that is counterproductive in the process so you gotta put a buffer in between the bottom of your bucket, I like to use a cooler full of ice in order to keep the water is cold as possible for as long as I can I keep 51 gallon jugs pulled out of the fridge and placed into the freezer at the moment. I start in order to hopefully when I need the first bottle, it’ll be like you know slush and I even freeze my spoons that I use for clean in the bags in order to be able to make retrieval easier. It’s almost necessary to do here because man you know the way Nick does. It is super crazy smart and if I had the space to buy an operate freezer that I could sit in I had a stole that idea last year maybe two years ago, but you live in an area that blesses you with ideal conditions to be able to do that and if you have any open floor space that concrete flooring in the winter you just gotta put your gear on that baby and get the spinning.

Hell yeah I’ll check out press club, I might get those that you have to practice with, I don’t anticipate doing massive runs maybe a couple oz at a time just to supply Myself with

 

[Captspaulding]

I gotta tell you, dude Nick uses a brand that I have been meaning to get myself ever since I saw them every bag instead of the screen being just on the bottom, the whole bag is the screen that would make the entire process much faster for each subsequent mix I can’t remember the name of them, but I’ve been using bubble bag dude for a while now because they are built really well There are times that I’ve maybe gotten a little aggressive towards the end of doing you a long days at a time runs where I thought I was gonna fuck those bags up and I would always dump them out, clean them and take a look at everything I have never once popped a thread on any of their bags. What ends up happening with me is the tool that I used to clean the actual screens themselves. It starts to fry the screens and I mean the more you clean them overtime you know it’s their susceptible to it and I clean them in bowls of ice water to try and make them last longer and it’s a whole heck of a lot easier to get any type of cannabis particulates out of them that way, but sometimes you know it’s just the only way to do it to get them flowing again unless you you know do all your mixes and pulls in an igloo, but regardless of all that man, they’re pretty solid dude their make up are great all the bags can take the beating, but I use a soft bristle toothbrush, some elbow grease and a loathing. I want to say the last set that I bought from them was in 2016. Yeah they’re almost 10 years old at this point and the only reason why I wanna buy one different is not because of some type of you know manufacturer defect or a failure in their equipment. It’s just because those bags Nick have make way too much sense. If I remember right, they’re called press club.
And the cool thing about those as well as you know if you remember and you’re at the spot to buy it, I have bounced dry ice through them numerous times numerous times to do you know cold induced dry sifts and they take that well and that dry ice can be pretty hard on shit so I mean yeah I would hit up @GNick55 for that brand that he fucks with though to check it out and compare builds and you know, maybe a few reviews yeah, press club, im failry certain anyway.
Man, I’ve been meaning to do that for a while now I totally forgot about that. Shit I’m just stubborn though. I have a hard time replacing things that aren’t necessarily shit or justify a new purchase the bubble bag dude bags are also good to dry flowers regardless of micron count your weather permittin of coarse. My only real gripe with the bubble bag dude shit is that they’re modeled to be slid it into a 5 gallon buddy bucket or Lowe’s bucket, etc. why the fuck they would give you drawstrings that do not lock when pulled to keep them from sliding into the bucket when you put weight in them, blows my mind and on top of that You know, they make them too loose, almost for almost every general application that you can buy from any store here yeah I kinda have to come up with your own little system in order to lock them in the place especially after you’ve been working in them for a while and they’re wet. They just keep on pulling themselves down in that damn Bucket And if you’re not on top of keeping your water, absolutely frigid that’s part of the reason those stirs and pools and runs can take so long because even slight warming temperature changes cannabisoils will start to clog the damn nets, but being where I am kind of makes things a bitch because it’s just hot here a lot of the time all year and if you live in a house with a concrete slab, that is your foundation and single floor, the amount of heat that can radiate through it even if it’s just a sunny day in early February and it’s like 45° outside it’s just something that is counterproductive in the process so you gotta put a buffer in between the bottom of your bucket, I like to use a cooler full of ice in order to keep the water is cold as possible for as long as I can I keep 51 gallon jugs pulled out of the fridge and placed into the freezer at the moment. I start in order to hopefully when I need the first bottle, it’ll be like you know slush and I even freeze my spoons that I use for clean in the bags in order to be able to make retrieval easier. It’s almost necessary to do here because man you know the way Nick does. It is super crazy smart and if I had the space to buy an operate freezer that I could sit in I had a stole that idea last year maybe two years ago, but you live in an area that blesses you with ideal conditions to be able to do that and if you have any open floor space that concrete flooring in the winter you just gotta put your gear on that baby and get the spinning.

Over the years, I’ve also thought about a way to improve your ability to actually agitate a work bag for plant matter and not pulverize anything in order to kill the purity content of that specific micron pool if you use a plastic shaft and you get those silicone batter spoons that bakers use And snatch the tips off of those and create yourself kind of like a super soft propeller on a plastic shaft, if you can throttle back a drill to its lowest speed and make a jig that can hold the drill upright and keep the trigger compressed on it
You can really make it way less of a painful process by doing something like that and getting decent size pools per bag because I really wanna get a bubble washer. It just looks like they can’t wash that much material as much as a 5 gallon buck can so that’s always been my drawback on, actually pulling the trigger of buying one, but I’ve thought about how to improve the methodology And use something that is soft enough that won’t start beating the shit out of your trichrome and the plant material as it’s being agitated and that’s the best things that I think you could use in order to create something that would be delicate enough to maintain the quality of the finished product

 

[Captspaulding]

Hell yeah I’ll check out press club, I might get those that you have to practice with, I don’t anticipate doing massive runs maybe a couple oz at a time just to supply Myself with

I don’t know what it is about the process you know but the honeymoon was over like after the first time I ever made that shit and I’ve had you know people come over hang out help me out with it and then I won’t ever see them again because they’re pissed off that I asked him to do something so dumb and annoying and redundant But they sure as hell would like to get that discount regardless yeah man, I would say that build wise bubble bag dude is the way to go, but if you or somebody that has a little bit of finesse and doesn’t hate the process as much as I do and doesn’t plan on you know waiting three solid grow years before you wanna break out that life bag and suffer through it Then yeah I would say press club is the way to go especially for a personal application. I remember seeing the one bag that Nick had gotten and I don’t know if it’s like they make one size of bags but if I remember right, I think it was like a bag for a 2 gallon or 3 gallon bucket. It was definitely a lot smaller than the 5 gallons Now I’m sure they probably make larger bags too, but I’m not a gambling man, but without even knowing the particulars press club is most likely more expensive than the bubble bag bags that’s a decent sales point for that because they’re cheap and halfway bulletproof. I’ve also used VIVosun 1 gallon bags before.
Absolutely terrible equipment. I went ahead and retired all of those and began Using them as trash bags for defoliation and drying sugar leaf trim at harvest they’re pretty great for that honestly I’ve had those bags in 80° environment in the chunk bunker dry completely wet fan leaves and two days which I’ll take that shit all day. How much rather have him drive, super fast and hanging on the wall, then wet soggy, sitting in a pot, which is a pet peeve of mine I cannot stand people that allow dead, dry funky ass leaves to stack up on top of their fucking medium and wonder why their plant on the bottom right hand portion of itself is dying



Its cal mag

 

[GNick55]

Hell yeah I’ll check out press club, I might get those that you have to practice with, I don’t anticipate doing massive runs maybe a couple oz at a time just to supply Myself with

ya press club,. but really any brand though it’s an all mesh bags your looking for,..

 

[Mikedin]

Over the years, I’ve also thought about a way to improve your ability to actually agitate a work bag for plant matter and not pulverize anything in order to kill the purity content of that specific micron pool if you use a plastic shaft and you get those silicone batter spoons that bakers use And snatch the tips off of those and create yourself kind of like a super soft propeller on a plastic shaft, if you can throttle back a drill to its lowest speed and make a jig that can hold the drill upright and keep the trigger compressed on it
You can really make it way less of a painful process by doing something like that and getting decent size pools per bag because I really wanna get a bubble washer. It just looks like they can’t wash that much material as much as a 5 gallon buck can so that’s always been my drawback on, actually pulling the trigger of buying one, but I’ve thought about how to improve the methodology And use something that is soft enough that won’t start beating the shit out of your trichrome and the plant material as it’s being agitated and that’s the best things that I think you could use in order to create something that would be delicate enough to maintain the quality of the finished product

Maybe get a drill and a thin plaster mixer and put the batter ends over the metal paddles

Silicone paddles brother!

 

[Florida_Mike]

over 2hrs arguing with AI on this one, I call it:

"Cast adrift in a world gone dry"

(notice the images are getting more lifelike)

 

[Florida_Mike]

Nobody around? Sweet, I'll just entertain myself then

 

[OODAloop]

Bro throwing up foam and the number threes. I haven’t ate since Sunday. It feels like that little guy pushing on my stomach from the inside. Painful. What’s crazy is my mouth tasted like the tacos I ate on Sunday. Old lady had a change of heart? If so congrats man. I need to chop the m86 and start some more seeds. Probably not gonna happen today. I was able to get some water down. This morning I drank some Gatorade and threw up white foam, no yellow Gatorade. My brother got some autoimmune disease where his gallbladder shrunk. His was so bad he couldn’t lay in a bed without throwing up the white foam. Idk if this is the same. I got the Mexican beer flu like three years ago and have been constantly sick ever since. When I got sick my arm hurt like I got a vaccine. It hurt for over a year. I couldn’t hold a cold beverage without extreme pain and my hand going numb. That arm and hand pain came back about a month ago, been feeling run down since. I never got the clot shot but I remember them bragging about the shedding vaccinating the vaccine hesitant. The whole arm pain really makes me think it was caused by shedding. My lady caught some nasty cold a few weeks ago, I somehow managed to not get it, but I think I got whatever she had back in December. Either way my immune system is completely compromised ever since that bout of the Mexican beer flu. I had it a few times but that one I think was from shedding was something else. I was sick for two months. Crazy headache at the top of my neck where it meets my skull. Every time I felt better a walk to the trash can in the backyard would take me out and completely sick again. I have massive beef with the government, pharmaceutical companies, and anyone else involved with the Mexican beer scandal. Immunizations were already blanketed from lawsuits. The emergency use clause gave the pharmaceutical companies immunity from lawsuits for those that took it. I didn’t choose to be part of their medical experiment. I can’t find a doctor who’s even willing to admit my issues are caused by the vaccine. It’s long covid and want to put me on pharmaceuticals. Which I absolutely refuse. Since all of this I began working in get this… the healthcare industry. My trust in the healthcare industry has even gone downhill from there. It’s all poison. These doctors pushing these glp1 drugs to seniors, it’s disgusting . They cost like a thousand dollars a month and they on social security making $800 a month. My dad died in the hospital before the Mexican beer flu. The doctor refused to sign the death certificate. Wanted his primary doctor to sign it because of Parkinson’s disease. Primary refused because he only saw him once, wanted the old doctor to sign it who also refused. Eventually one of the places had a doctor who never saw him sign the thing. Had that been during the Mexican beer flu, it would have been signed right away and the cause would be too much Mexican beer. Sorry about the long rant

My wife is a supervisor for stewarts shops of NJ,NY and VT you wouldnt believe the amount of germs those folks get exposed to......truly believe they should be receiving some form of hazard pay for it. Ive only had chicken pox and a form of strep throat when i was about 12 yrs old that nearly killed me (caveat is im anaphlax allergic to penniclillin) But these last three years ive battled a fatigue........Literally feel like im walking through a dream. Horrid fluid out alot of passages. Had to start using local elderberries believe it or not and started making flu tinctures and keeping the recipes from the moldovans that have moved to my area. GREAT people they are! Ive come out the other side of this chitstorm if i can help you i will.

 

[OODAloop]

Yeah they still have the Samsungs atm I just got the new SE3000, a lot of lights are running the LM301H’s like this one does. But times are changing,

But I have lights with bridgelux diodes too and they do awesome as well.

which are these ya think?

 

[Mikedin]

 

[Mikedin]

View attachment 2406547
which are these ya think?

Is that the SE5000? Looks like the SE series due to the colors, If it is those should be the LM301H’s especially if bought within the last idk 6-7 months

 

[Mikedin]

ya press club,. but really any brand though it’s an all mesh bags your looking for,..

Thanks brother I’ll check it out, it was between those or a press, but I think the bags would do better for me personally

I wanna make a nice big hash ball like the ones you’re always shown off

 

[OODAloop]

Is that the SE5000? Looks like the SE series due to the colors, If it is those should be the LM301H’s especially if bought within the last idk 6-7 months

Fluence spier series at 600w they come in the 2x 2p 2i 2h .....Trying to learn as much as possible. i have the instruction manual but have yet to see where they say the diode manufact. They also claim this fixture can be 6 inches above the canopy lmaop idk about that maybe on 15%

 

[OODAloop]

 

[closettrapper217]

Looks like Banjo x Columbian #2 will be seeing an early grave.

I'ma name it Herman
View attachment 2406336

Bummer. Banjo x Colombian #1 looks clean so far though.


I'll probably veg this original banjo and this banjo x Haymeadow purps another week or so and then throw them in there to take its place

That’s my Pac-Man frogs name Herman lol I know. A little of subject but lol

Didn’t know if he was a boy or girl lol

 

[Mikedin]

Fluence spier series at 600w they come in the 2x 2p 2i 2h .....Trying to learn as much as possible. i have the instruction manual but have yet to see where they say the diode manufact. They also claim this fixture can be 6 inches above the canopy lmaop idk about that maybe on 15%

Yeah toss that manual, I’d never intentionally run a light less that 14-16” from canopy especially mid to late flower, just asking to evap those terps blastin them that close lol

I’m researching that light but can’t find any specs listed for diode type… hmm more digging to go!

 

[closettrapper217]

I don’t know what it is about the process you know but the honeymoon was over like after the first time I ever made that shit and I’ve had you know people come over hang out help me out with it and then I won’t ever see them again because they’re pissed off that I asked him to do something so dumb and annoying and redundant But they sure as hell would like to get that discount regardless yeah man, I would say that build wise bubble bag dude is the way to go, but if you or somebody that has a little bit of finesse and doesn’t hate the process as much as I do and doesn’t plan on you know waiting three solid grow years before you wanna break out that life bag and suffer through it Then yeah I would say press club is the way to go especially for a personal application. I remember seeing the one bag that Nick had gotten and I don’t know if it’s like they make one size of bags but if I remember right, I think it was like a bag for a 2 gallon or 3 gallon bucket. It was definitely a lot smaller than the 5 gallons Now I’m sure they probably make larger bags too, but I’m not a gambling man, but without even knowing the particulars press club is most likely more expensive than the bubble bag bags that’s a decent sales point for that because they’re cheap and halfway bulletproof. I’ve also used VIVosun 1 gallon bags before.
Absolutely terrible equipment. I went ahead and retired all of those and began Using them as trash bags for defoliation and drying sugar leaf trim at harvest they’re pretty great for that honestly I’ve had those bags in 80° environment in the chunk bunker dry completely wet fan leaves and two days which I’ll take that shit all day. How much rather have him drive, super fast and hanging on the wall, then wet soggy, sitting in a pot, which is a pet peeve of mine I cannot stand people that allow dead, dry funky ass leaves to stack up on top of their fucking medium and wonder why their plant on the bottom right hand portion of itself is dying



Its cal mag

Boron*

 

[Mikedin]

Breakfast of champions

Wife’s fault she sent me shopping after I’ve been working since 3pm yesterday afternoon

She was throughly warned

 

[OODAloop]

I havent drank labatt since i saw iron maiden at the montreal forum many moons ago!

 

[Mikedin]

Can’t even hate she had a great sense of humor