THE TRAINWRECK. Brought to you by thcfarrmer…..

[Ninjadogma]

Small family gathering at mom's house. Not leaving empty handed!

Really love your peaches wanna shake your tree (wah wah!)

 

[cannafarmer420]

Guys what's the dankest bud you've ever grown? Pics of you've got them

Space panda atlas seeds, heavy indica, insane bud structure that i have never seen before or since, caused paranoia. It had like 6 different 8 to 12 gram nugs hard as a rock

 

[Justlovetogrow]

Space panda atlas seeds, heavy indica, insane bud structure that i have never seen before or since, caused paranoia. It had like 6 different 8 to 12 gram nugs hard as a rock

She’s beautiful

 

[NisterMice]

 

[Thatoneguyyouknow_]

Space panda atlas seeds, heavy indica, insane bud structure that i have never seen before or since, caused paranoia. It had like 6 different 8 to 12 gram nugs hard as a rock

well shit if were just going most potent as dankest, and not the flower you liked the most, it was definitely a Biggs F2 pheno. Was a gelato 44 x bubba kush. Shit was definition of a 1 hitter quitter. If i smoked too much of it, id end up in a really fowl mood though, so i never really smoked on it, just sold it and gave it away lmao.


Still not letting me redownload the pics lmao. This is what weed thats "too strong" (imo) looks like lmao.

Left is peaceblasters momma (I think, might be a peace blaster pheno), right is the Biggs f2 pheno. Would routinely test in facility over 30%. Highest was 33

She def gave some tru chonkers tho too. I've had near half ounce buds from that pheno. Nearly an ounce dry on the main colas (each) was typical with her too. Not counting their popcorn. She was rock dense.

 

[Thatoneguyyouknow_]

well shit if were just going most potent as dankest, and not the flower you liked the most, it was definitely a Biggs F2 pheno. Was a gelato 44 x bubba kush. Shit was definition of a 1 hitter quitter. If i smoked too much of it, id end up in a really fowl mood though, so i never really smoked on it, just sold it and gave it away lmao.


Still not letting me redownload the pics lmao. This is what weed thats "too strong" (imo) looks like lmao.
View attachment 2443153
View attachment 2443144
View attachment 2443145


Left is peaceblasters momma (I think, might be a peace blaster pheno), right is the Biggs f2 pheno. Would routinely test in facility over 30%. Highest was 33
View attachment 2443146



She def gave some tru chonkers tho too. I've had near half ounce buds from that pheno. Nearly an ounce dry on the main colas (each) was typical with her too. Not counting their popcorn. She was rock dense.

added info

I kept this pheno because my roommate knew a cancer patient who swore by this flower for pain and nausea both. No one else liked it though (besides one friend back here in tn who LOVES it, she was given all the remaining biggs f2 seeds last summer lol), and it was rarely bought by anyone else unless i had nothing else. Smelled kinda like baby diarreah too lol. Its what i gave away at the time to friends and family in need, sold when i had nothing else, and saved for carol, my roommates friend with cancer.

 

[cannafarmer420]

She’s beautiful

Thanks, I really liked the structure on her

 

[Mikedin]

Evening homies

 

[Mikedin]

Gunna grab some final lights out pics so whenever I chop over the next few days I don’t have to get use first

I’ll see how she focuses with no lights on in the tent for some trich shots

 

[MartyMcFly42oh]

I tried again this morning before work to get a lights out trich’s out shot, with some pointers from @Thatoneguyyouknow_ Still need to practice, the damn phone has a mind of its own, kept doing a long exposure or a live shot instead of activating the flash. Probably too much ambient light this morning. I will try again tomorrow morning.

 

[figolus]

I knew about refrigerated wine cellars, now there are weed cellars

1600$ anyway

 

[Mikedin]

How’s these

 

[SunshineSupergirl]

Hey guys.

I think my MagLong 2000 LED has lost some intensity, most likely due to too much humidity going into the driver or perhaps the driver simply isn't acting like it should for another reason.

It stopped flickering for the most part after I dried things out but it doesn't seem as bright as before at 100% power.

The white lights seem dimmer and the yellow is more pronounced but the red and infered seem normal.

When adjusting the dimmer from 80 to 100 I notice no difference.

I hope there's a way to fix this.

That being said I'm STILL getting very strong PPFD'S, 900 UMOLS in the center at 24 inches away, 16 inches 1300 or so.

It's working just not the same.

Thoughts?

Here's all the specs

 

[Thatoneguyyouknow_]

Hey guys.

I think my MagLong 2000 LED has lost some intensity, most likely due to too much humidity going into the driver or perhaps the driver simply isn't acting like it should for another reason.

It stopped flickering for the most part after I dried things out but it doesn't seem as bright as before at 100% power.

The white lights seem dimmer and the yellow is more pronounced but the red and infered seem normal.

When adjusting the dimmer from 80 to 100 I notice no difference.

I hope there's a way to fix this.

That being said I'm STILL getting very strong PPFD'S, 900 UMOLS in the center at 24 inches away, 16 inches 1300 or so.

It's working just not the same.

Thoughts?

Here's all the specs

you could use a multimeter to test the output voltage of the driver at 100% vs all the way down, and compare those results to the voltage range given on the driver's sticker. you can probably buy a multimeter on amazon prime for under $10 btw. And you will likely have future benefit from owning one too fwiw.

This would tell you whether you have damaged the driver, or the Diodes themselves. If it check out +/- 5% or so with the drivers rated specs, you know the issue with with the led's. If its the driver those are very easy to replace if warranty wont cover it. And you dont have to solder anything either. Thick Electrical tape and a splice is fine at these wattages.

Could be as simple as the carbon strip in the variable resistor (the knob that dims the driver) just has some corrosion or build up or something on it now and the sweep is messed up. Contact cleaner for the win in that case. Could make the spectrum seem off, cool white and warm white led's dont respond exactly the same to voltage ranges as the white ones do, depending on the generation and make of the diodes used etc.

You have now firmly stepped into my wheelhouse Mrs Sunshine am a born n bred tinkerer of gizmos and gadgets.

 

[MartyMcFly42oh]

How’s these

 

[Putthataway]

Gays love a good tit joke as much as the rest of us!!! I just asked one to make sure !

I know a guy who loves tits

 

[SunshineSupergirl]

you could use a multimeter to test the output voltage of the driver at 100% vs all the way down, and compare those results to the voltage range given on the driver's sticker. you can probably buy a multimeter on amazon prime for under $10 btw. And you will likely have future benefit from owning one too fwiw.

This would tell you whether you have damaged the driver, or the Diodes themselves. If it check out +/- 5% or so with the drivers rated specs, you know the issue with with the led's. If its the driver those are very easy to replace if warranty wont cover it. And you dont have to solder anything either. Thick Electrical tape and a splice is fine at these wattages.

Could be as simple as the carbon strip in the variable resistor (the knob that dims the driver) just has some corrosion or build up or something on it now and the sweep is messed up. Contact cleaner for the win in that case. Could make the spectrum seem off, cool white and warm white led's dont respond exactly the same to voltage ranges as the white ones do, depending on the generation and make of the diodes used etc.

You have now firmly stepped into my wheelhouse Mrs Sunshine am a born n bred tinkerer of gizmos and gadgets.

I hear what you're saying but I need some more information on how to do these things.

Where do I put the multimeter?
How do I use that?
How do I know if it's the dimmer and how do I use contact cleaner?

If the problem isn't the driver and it's the LEDs, what then?


I think I might have a warranty for this light, but not sure if I have saved the documentation.

I bought it from Amazon.

Worked wonderfully well 3 years ago, when I used it for 3 months.

It's only been used 5 months total now.


Also can you recommend a multimeter for this?

 

[SunshineSupergirl]

I hear what you're saying but I need some more information on how to do these things.

Where do I put the multimeter?
How do I use that?
How do I know if it's the dimmer and how do I use contact cleaner?

If the problem isn't the driver and it's the LEDs, what then?


I think I might have a warranty for this light, but not sure if I have saved the documentation.

I bought it from Amazon.

Worked wonderfully well 3 years ago, when I used it for 3 months.

It's only been used 5 months total now.


Also can you recommend a multimeter for this?

Is it possible I'm having a voltage problem in house? Or maybe at the outlet?

 

[BB22]

Is it possible I'm having a voltage problem in house? Or maybe at the outlet?

Have you checked all your connections ? Everything tight and right

 

[PlumberSoCal2]

The Lone Ranger was ambushed and captured by an enemy Indian War Party. The Indian Chief proclaims, "So, you are the great Lone Ranger...In honor of the Harvest Festival, YOU will be executed in three days. "Before I kill you, I grant you three requests. What is your FIRST request?'
The Lone Ranger responds, "I'd like to speak to my horse."
The Chief nods and Silver is brought before the Lone Ranger who whispers in Silver's ear, and the Horse gallops away.
Later that evening, Silver returns with a beautiful blonde woman on his back. As the Indian Chief watches, the blonde enters the Lone Ranger's tent and spends the night.
The next morning the Indian Chief admits he's impressed. "You have a very fine and loyal horse. But I will still kill you in two days."
"What is your SECOND request?"
The Lone Ranger again asks to speak to his horse. Silver is brought to him, and he again whispers in the horse's ear.
As before, Silver takes off and disappears over the horizon.
Later that evening, to the Chief's surprise, Silver again returns, this time with a voluptuous brunette, more attractive than the blonde.
She enters the Lone Rangers tent and spends the night.
The following morning the Indian Chief is again impressed.
"You are indeed a man of many talents, but I will still kill you tomorrow. What is your LAST request?"
The Lone Ranger responds, "I'd like to speak to my horse...alone."
The Chief is curious, but he agrees, and Silver is brought to the Lone Ranger's tent.
Once they're alone, the Lone Ranger grabs Silver by both ears, looks him square in the eye and says,
"Listen Very Carefully!!!
"FOR...THE...LAST...TIME..."

"BRING POSSE"