Log In Register

THE TRAINWRECK. Brought to you by thcfarrmer…..

Ever try to get ahold of cookie puss??🤣 Im eating 3 right meow.
Home Forums Medical Cannabis Cultivation Grow Diaries THE TRAINWRECK. Brought to you by thcfarrmer…..
Grow diary eligible · Medical Cannabis Cultivation

THE TRAINWRECK. Brought to you by thcfarrmer…..

by Captspaulding · Started
1d
Running
0
Updates
95,543
Replies
0
Images
Discussion below · 95,543 replies
Page 3661 of 4778 · Replies 73,201–73,220 of 95,544
Status
Not open for further replies.
Tell the Truth 🤓

First real concert . Significant musician performance ✌️🤣

I was misfit 80s kid, Billy squire, Ratt, Greatful Dead 🫡🤣💨✌️
The Coasters, not sure who if any were original. I always liked idk... "black group music" be it doo-wop or soul or motown... JGB had a lot more of it than the Dead. I saw the Dead too young, it was just annoying and loud and noise, I was like 10. I picked them back up around 14-15 when I started paying attention to music beyond just noise and words.
 
So i went ahead and installed some structural support for the shelving off of the studs in the walls, so i could chop the legs off to make room for the mobil cloning/seedling nursery,
I still have to sand and repaint the corner posts on the cart. The posts are also telescopic and can raise the light and extra 1-1 1/2 ft if need be. Its at the lowest setting now, it also doubles as a shelving unit for supplies
The point was to maximize the abitly for some storage and have the cloning seedling area be a bit more fluid as the bunkers needs change through growth stages and dirt storage ect.
Keeping it as versitile as possible.
Itll be nice once i spray paint it
Been bust today, yard work. Car abd grow room shit.
Hope evryone had a great weekend.
👊🏻🤡
Nice construction, very neat.


My bitches are looking up, second hand application of foliar mag water and well I'm hoping this will push us through so I can dry the soil out more. Even if they get pissy I'm tacking on one more day to the schedule and the combination should do it... positing that it's wetness compacting soil and blocking uptake of mag normally. Which is suspect unless it's just something a n00b has to learn about plants I guess.

Annie (tall) is right back to normal with no color indications or anything. It's been a lighter green it's whole life than it's sister and every other part is lush and hydrated and say she is probably not in "beginning flowering" now, the sugar leaves are characteristic little spears rather than canoe-bodied like other leaves but they're little. 2 days to 12 weeks and little flowers popped maybe 6 days ago distinct from the "could be more veg" top growth I'm still seeing in her sister Molly on the right.
Dear fat Molly got WAY angrier and might have had an actual leaf die. Also top leaves coming in (still firmly veg, this auto has decided schedule be damned I guess) at the leading top tips are reverse-canoed and twisted but she has responded visually to a mag watter sprinkle on the leaves overnight too. All it's other leaves were like *bam* THANK YOU! and look great now. I backed her off the light from 12" to 16" distance.
 
Top o the mernin’
Hermanos e hermanas.
Its gonna be that kinda day,
Bong rips perculating through skulls,
A sandwich or 7 with plural bacons many,
I feel like its gonna be a swell hootenanny of a shindig today.
My race car parts are going to be here later
Im stoked.
I have a 6inch carbon filter to replace, some hydro buckets to flush,
And a few things im gonna do to the race car trailer interior to insulate it a bit, the ac has a hard time in there peak hours of the day, alot of foam being jammed in all the crevices. And i have a badass tool cabinet to install in there 3ftw 18in deep 6ft 4in tall,
And a spare ventilation fan im gonna route to the top hatch. Gonna repurpose some old blow up mattressess into heavy duty side door and rear hatch membranes.
To aid the ac
And spliffs.



Of coarse,
Be well degenerate farmers.
And practice some swift, stealth civil disobedience.
Brought to you by carls jr.👊🏻🤡
 

Attachments

  • 82783E3B-1448-47C3-8A94-570DBCF1535F.png
    82783E3B-1448-47C3-8A94-570DBCF1535F.png
    543.4 KB · Views: 2
Tell the Truth 🤓

First real concert . Significant musician performance ✌️🤣

I was misfit 80s kid, Billy squire, Ratt, Greatful Dead 🫡🤣💨✌️
Cheap Trick May 4th 1979, at War Memorial Auditorium in Rochester NY. Solo act.
My high school shop class teacher took me and my buddy.

After the show, we were getting wieners at a little hot dog cart.
A stretch limo came racing up the street and to a screeching stop a short ways from us.
6 dudes in nice suits piled out with golf clubs and came running down the street right towards the 3 of us, yelling shit like "there they are, get'em!" etc.
Needless to say, we were scairt shitless and could do nothing but cower...
When they got to us, they....

...kept right on going and caught up to these 2 guys, that were just walking casual & trying to blend in with the crowd. They tried running at the last minute, but to no avail.
They (the "golfers" lmao) proceeded to catch & beat the breaks off those two fellers with their golf clubs; then jumped back into the limo which had reversed down the street to where the beat-down was going on and sped off.

The whole thing was prolly over in less than 60 seconds, but to the 3 of us, it seemed like a lifetime.... And boy, I'm telling you, they were as fn fast and efficient as an Indy pit crew.

We had to go past the beating scene to get to where we parked, so we just crossed the street and walked fast and got out of the area as the 1st cops were showing up.

Ahhh, good times lmfao!



Moral of the story: Fuck around, fuck around; get your ass beat down w/ golf clubs..... 🏌️‍♀️🏌️‍♂️💪👊🤜 😵🤣🤣🤣💨💨💨
 

Attachments

  • 0e439cc3-76d9-4601-b031-56fb3e2514e0.png
    0e439cc3-76d9-4601-b031-56fb3e2514e0.png
    274 KB · Views: 3
Top o the mernin’
Hermanos e hermanas.
Its gonna be that kinda day,
Bong rips perculating through skulls,
A sandwich or 7 with plural bacons many,
I feel like its gonna be a swell hootenanny of a shindig today.
My race car parts are going to be here later
Im stoked.
I have a 6inch carbon filter to replace, some hydro buckets to flush,
And a few things im gonna do to the race car trailer interior to insulate it a bit, the ac has a hard time in there peak hours of the day, alot of foam being jammed in all the crevices. And i have a badass tool cabinet to install in there 3ftw 18in deep 6ft 4in tall,
And a spare ventilation fan im gonna route to the top hatch. Gonna repurpose some old blow up mattressess into heavy duty side door and rear hatch membranes.
To aid the ac
And spliffs.



Of coarse,
Be well degenerate farmers.
And practice some swift, stealth civil disobedience.
Brought to you by carls jr.👊🏻🤡
 
Well my day is shot. Adam 12 episode where a guy steals the red 1972 Javalin and totals it.
I had that exact match vehicle in 1983. 72 sst. I sold it pretty quick as even back then there were a ton of problems with the motor ( intake and heads ) that in a few months I had the engine apart more than running. Finally fixed it by getting the heads and the intake shaved down to match as someone had shaved the heads before.
35 years later and that vehicle is still not a big collector as limited production and shitty engineering means if your car is not intact you are not going to find anything for that car.
I had a customer bring one in for just some trim repairs. Badges and silver strips. Door guards and window trim.
Guy spent 6k on trim and some of it was b and c stuff as that was the only thing available. Repaired it looked ok at 10 feet but was never gunna drive the stage at Peterson.
Loved that car but that was actually a good lesson for a 19 year old kid who bought someone else's problems.
Now I wanna find a Javalin to test drive.
 
Well my day is shot. Adam 12 episode where a guy steals the red 1972 Javalin and totals it.
I had that exact match vehicle in 1983. 72 sst. I sold it pretty quick as even back then there were a ton of problems with the motor ( intake and heads ) that in a few months I had the engine apart more than running. Finally fixed it by getting the heads and the intake shaved down to match as someone had shaved the heads before.
35 years later and that vehicle is still not a big collector as limited production and shitty engineering means if your car is not intact you are not going to find anything for that car.
I had a customer bring one in for just some trim repairs. Badges and silver strips. Door guards and window trim.
Guy spent 6k on trim and some of it was b and c stuff as that was the only thing available. Repaired it looked ok at 10 feet but was never gunna drive the stage at Peterson.
Loved that car but that was actually a good lesson for a 19 year old kid who bought someone else's problems.
Now I wanna find a Javalin to test drive.
My friend, who I have not strangled, had a 73/74 Javelin that was in magazines and winning awards with no problems and he sold it because it was "too much of a show pony".
I was about to type a turettes fit but I forgot I never actually checked the moderation here lol. Gotta be 18+ right? Boobs ok? Full donkey penetration? Liveleak war snuff films? Or is this play nice land?
 
My friend, who I have not strangled, had a 73/74 Javelin that was in magazines and winning awards with no problems and he sold it because it was "too much of a show pony".
I was about to type a turettes fit but I forgot I never actually checked the moderation here lol. Gotta be 18+ right? Boobs ok? Full donkey penetration? Liveleak war snuff films? Or is this play nice land?
Most of the problems for the larger engine was due to the detuning of the motor. The quick and dirty answer was shaving the heads to bump up compression and retune the advance curve.
Problem was on the larger engine the angle of the intake mounting gets narrower top to bottom unless you grind the intake to match. Add to that a crappy steel shim with no shit Sherlock Shallac on the gasket and well that bitch gunna leak AND carve out channels in the metal.
 
Most of the problems for the larger engine was due to the detuning of the motor. The quick and dirty answer was shaving the heads to bump up compression and retune the advance curve.
Problem was on the larger engine the angle of the intake mounting gets narrower top to bottom unless you grind the intake to match. Add to that a crappy steel shim with no shit Sherlock Shallac on the gasket and well that bitch gunna leak AND carve out channels in the metal.
You also can't go doing that on a like 1/400 Pierre Cardin editions unless you crate the original motor.
 
Some shop profits piled up, I'm either looking at a proper 100w LED with fan...
OR that nutrient system I mentioned which I have to go back and find...
OR a CNC mini machine...
$160 in the official "profits minus expenses" can for the laser shop.
 
Some shop profits piled up, I'm either looking at a proper 100w LED with fan...
OR that nutrient system I mentioned which I have to go back and find...
OR a CNC mini machine...
$160 in the official "profits minus expenses" can for the laser shop.
I and just about everyone here will prolly say light.
Amazon prime days the vivosun line has panels very inexpensive but I also see some now out of stock and even on the vivosun app they are out of stock. This leads me to believe Vivosun is going to eliminate the non fan in ligjt panels. Saw a 200 watt panel at 109$ went out in a couple of days. The tuneble one avaliable bur the full spectrums look to be on the way out.
 
I and just about everyone here will prolly say light.
Amazon prime days the vivosun line has panels very inexpensive but I also see some now out of stock and even on the vivosun app they are out of stock. This leads me to believe Vivosun is going to eliminate the non fan in ligjt panels. Saw a 200 watt panel at 109$ went out in a couple of days. The tuneble one avaliable bur the full spectrums look to be on the way out.
Now that sucks, I want to stay with them. A tunable light might be nice since it's a secondary. Never used one but hey, I've barely used anything lol. Now you would dollar for dollar place light ahead of a seed to harvest system pack?
 
Right now Vivosun is showing a super flash sale of the 4 pack tuneable 100 watt with fans and the mountingg kit for $259.
400 watts for $259.
the base single is $79.
I have all Vivosun....I like them.
Some shop profits piled up, I'm either looking at a proper 100w LED with fan...
OR that nutrient system I mentioned which I have to go back and find...
OR a CNC mini machine...
$160 in the official "profits minus expenses" can for the laser shop.
I have nothing but Vivosun lights 10-100 watts....and one 400 watt. I like them, they have the fans in them which I like....keeps circulation going. Most packages come with the E42- controller. The 400 watt light has wings that can be moved up.....down with 2 fans. For my grow operation they all work well. I have a 4x8....and 4x4...yes vivosun...lol.....grow tents.
 
2 tents 3 lights all bought on prime sales. I do use ACI environmental controls and apps with the thermo and cloud forge which could not be duplicated by Vivosun although they are sure trying. A few ac and humidity developments in the works. I think they are going to have a fail in the cure box as I just do not see that issue as a problem to solve for $800.
 
Status
Not open for further replies.
Page 3661 of 4778 · Replies 73,201–73,220 of 95,544
Back
Top Bottom