THE TRAINWRECK. Brought to you by thcfarrmer…..

[Florida_Mike]

Y don’t ya bend them tall girls right over they like it nah to get em evenish with the other ones then wack a net over em to keep em there they gunna be woody stemed so be careful or you will get the dreaded crack looking schmick though

That is my plan, "breaking necks and shaving legs" as someone else so eloquently put it. I'm just waiting on my helper to be available...

 

[Justlovetogrow]

That is my plan, "breaking necks and shaving legs" as someone else so eloquently put it. I'm just waiting on my helper to be available...

You know us Aussies mate we Fkn good with our talking words

 

[voltage]

Err... what time is it?

Morning farmers.

Veg tent girls need to join the big broads party in the flower tent.

 

[Justlovetogrow]

Err... what time is it?

Morning farmers.

Veg tent girls need to join the big broads party in the flower tent.

9:26pm here mate

 

[Florida_Mike]

Good morning farmers, happy Sunday!

Church with Pantera this fine morning...

 

[PlumberSoCal2]

Finally hitting beast-mode after 2 gatdamn months.
Looks like Ima have a (jungle) problem like before;
only I'm going to attempt to put nets up this round.

These were never topped bc I wanted one of them
to look like an xmas tree for the contest. Maybe a
mistake, we'll find out together.

@PlumberSoCal2 They seem to be thriving in my
recirculating system so far; the only thing so far
is a daily pH upswing of 0.2-0.3 points over 24 hrs...
No biggie. I'm curious to see what happens when
the coco starts breaking down...

They are on continuous feed during lights on and
will get 2 or 3 - two minute feeds during the dark
cycle (adjusted more or less as needed)

I'm a solid month behind my og plans, I may be
just able to squeeze two runs in before it gets
too hot out.

If anybody has any helpful info on the following
three strains - flowering time, feed preferences
likes dislikes etc. please share (pics welcome):
1) Cali Blues
2) Maui Gas Pedal
3) PBB Okie & Cman

I'm not holding out a lot of hope for these bc of
the limited pot size... we'll see what one gal
nursery pots will produce.

8-21-25
View attachment 2556330
And now on 11/2/25
View attachment 2556310
View attachment 2556311

Killing it brother!

I use Master Blend and that was not recyclable using coco. Weird. I have a 20 gallon plastic box I collected the run off in and then pumped that back through the pots and within a couple days problems started. This was 5 or 6 years ago. I still haven't looked into why. Since then I just drain/waste and not think much about it

 

[PlumberSoCal2]

Looks awesome. I have 2 greenhouse kits my wife bought me for last Christmas. I still havent set up. My brother got one and set it up. He had problems with wind and thunderstorms. How do you plan on dealing with that situation?

The weight of the pallets and joining them together as well as driving several 3' pieces of rebar into the ground attached to the pallets should keep it in place. I built one over a dozen years ago

6x9' and it's still standing although a tree is leaning on it and why I've abandoned it. I plan on cutting the tree down this winter.

For those without pallets a 2x4" or 2x6" frame can be used on the ground and 2-3' pieces of rebar driven into the ground and attached to the wood.

I'll diary this build with cost in the next couple days as time allows.

 

[PlumberSoCal2]

 

[Florida_Mike]

Killing it brother!

I use Master Blend and that was not recyclable using coco. Weird. I have a 20 gallon plastic box I collected the run off in and then pumped that back through the pots and within a couple days problems started. This was 5 or 6 years ago. I still haven't looked into why. Since then I just drain/waste and not think much about it

Haha, thanx for the compliment! This has been a challenging rescue mission from the beginning.... But worry not; I still have plenty of time to fook something up . In the meantime, I keep a 24/7 live view right beside me; HA!

 

[Florida_Mike]

The weight of the pallets and joining them together as well as driving several 3' pieces of rebar into the ground attached to the pallets should keep it in place. I built one over a dozen years ago
View attachment 2556350
6x9' and it's still standing although a tree is leaning on it and why I've abandoned it. I plan on cutting the tree down this winter.

For those without pallets a 2x4" or 2x6" frame can be used on the ground and 2-3' pieces of rebar driven into the ground and attached to the wood.

I'll diary this build with cost in the next couple days as time allows.

Sweet build! have you ever built them hoop style? Pros/cons?

 

[Florida_Mike]

 

[PlumberSoCal2]

Sweet build! have you ever built them hoop style? Pros/cons?

I've never tried to build one nor tried to heat and bend the pipe. I've thought about getting a heating gun but have no other use than heating and bending pipe and I want the house to be large enough to walk into and stand upright.

I've seen some pretty cool ones tho. I think it's because the way my brain works. Can I heat and bend the pipes all the same or would that be impossible? How would I make a door? Using fittings I know each section will be the same and will fit together as intended. I'm sure I over think things but so far so good

 

[Magnumsmydog]

Took this mid day yesterday

Went down at lights out and it fell over smashed two other plants

 

[Greenadian]

Too heavy bro!! Not a bad problem tho

 

[closettrapper217]

Some of the best weed I've ever smoked was seeded.... just saying

All of the weed I smoked until I was 14 had seeds in it. And I had many fun’s.

Just saying lmao

 

[closettrapper217]

Finally hitting beast-mode after 2 gatdamn months.
Looks like Ima have a (jungle) problem like before;
only I'm going to attempt to put nets up this round.

These were never topped bc I wanted one of them
to look like an xmas tree for the contest. Maybe a
mistake, we'll find out together.

@PlumberSoCal2 They seem to be thriving in my
recirculating system so far; the only thing so far
is a daily pH upswing of 0.2-0.3 points over 24 hrs...
No biggie. I'm curious to see what happens when
the coco starts breaking down...

They are on continuous feed during lights on and
will get 2 or 3 - two minute feeds during the dark
cycle (adjusted more or less as needed)

I'm a solid month behind my og plans, I may be
just able to squeeze two runs in before it gets
too hot out.

If anybody has any helpful info on the following
three strains - flowering time, feed preferences
likes dislikes etc. please share (pics welcome):
1) Cali Blues
2) Maui Gas Pedal
3) PBB Okie & Cman

I'm not holding out a lot of hope for these bc of
the limited pot size... we'll see what one gal
nursery pots will produce.

8-21-25
View attachment 2556330
And now on 11/2/25
View attachment 2556310
View attachment 2556311

Mm Cali blue. I burned this one a little bit early on because I was messing around with getting my lights entirely too close at this point haha

Regular 9 weeker from the pheno I had. Clean blue dream sativa like high from an indica life span and yields like a sumbitch. I still keep her clone around to run again some time. But so many strains so little room lol

 

[Grow4fun420]

Check out what was growing on the ground by my backyard. Literly weed growing from the floor. Most likely its a bag seed

 

[PlumberSoCal2]

More fog

I hate cold wet mornings

 

[closettrapper217]

More fog
View attachment 2556445
I hate cold wet mornings

Beautiful view though

 

[Florida_Mike]

Clones are up-cubed. The 4x4x4 blocks are 64 cubic inches, vs 32 cu inch in a solo cup. I should be able to keep some decent sized mothers in these and let the roots just air prune. They will each get a 1/4 feeder and be on a 400ppm starvation diet until needed