Grow diary mission impossible (low to medium budget lol)

[BearWater]

Great work on the room. Damnit, I just got my tent set up and now I want a room! LOL

hahaha! Next thing you know your place is going to be lookin like MikedIn’s! what’s your upper limit for tents in the living room?

Thank you! I’m going to work on it this weekend, getting the finishing supplies and then I’ll be able to really set the climate up with the 1000w and some air flow testing. all new to me(lung room) JJ has been a big help in getting me pointed in the right direction : )

 

[BearWater]

I do a raw dawg scrape, right in my dedicated hash pipe. I do know quite a few peeps that rather go that route. They use Everclear though. I have dabbled. I end up mixing the Everclear before harvest. So ya raw dawg fer me.

I just hate how gummed up and sticky the leaves get on the scissors. But I’ll try the scrape off next time : ) heck I could probably scrape those in the picture!

 

[Putthataway]

I couldn’t even catch this while I was in purgatory . Bear rocking it out!

 

[BearWater]

I couldn’t even catch this while I was in purgatory . Bear rocking it out!

WWHHHHAAATTT UUUUUPPPPPPP!? dude you’re back back!

 

[BearWater]

Hey @cpurola was it you who added the grommets to their fabric pots or was that Gal? i was thinking about getting the tool and grommet pack to customize all my pots. is there anything to stay away from as far as styles of grommets or tools? I will need to apply them on the potted plants. thank you! : )

 

[BearWater]

Learning some on this lung room thing! Going to switch things up a bit and play around with push/draw, just tinkering : ) trying to get things done in the flower room so i can get the 1000w on! i have a few plants on the early side that could flip now, which will put all three rooms in operation to really dial in the heat and fans.

 

[Oldchucky]

Hey @cpurola was it you who added the grommets to their fabric pots or was that Gal? i was thinking about getting the tool and grommet pack to customize all my pots. is there anything to stay away from as far as styles of grommets or tools? I will need to apply them on the potted plants. thank you! : )

You could do it the cheap way. Poke holes in the fabric and put a zip tie in, but leave it loose. Then tie onto it!

 

[BearWater]

You could do it the cheap way. Poke holes in the fabric and put a zip tie in, but leave it loose. Then tie onto it!

Was going to do that! Started thinking it would rip after time? I do have some duct tape and could just fold a piece over the top to make the hole through! I’ve got that left over aluminum wire that is freaking awesome for training. got me wheels turning chucky, thanks!

 

[amneziaHaze]

Was going to do that! Started thinking it would rip after time? I do have some duct tape and could just fold a piece over the top to make the hole through! I’ve got that left over aluminum wire that is freaking awesome for training. got me wheels turning chucky, thanks!

How about aligator clamps?

 

[cpurola]

Hey @cpurola was it you who added the grommets to their fabric pots or was that Gal? i was thinking about getting the tool and grommet pack to customize all my pots. is there anything to stay away from as far as styles of grommets or tools? I will need to apply them on the potted plants. thank you! : )

Hi Bear! I bought a grommett tool kit 'cause, well, I have this addiction to tools. LOL
But all the low tech ideas sound much easier.
Here's the one I got. It worked great, but the ones in the kit were steel and rusted. Don't know if you can use the same tool for aluminum.
Grommet tool

 

[MileHiGhost]

I prefer fabric zip ties. Aka velcro,. Dip them in viniger to clean, cut to size. Softer than og zip ties

 

[MileHiGhost]

Definitely more sustainable.

 

[BearWater]

How about aligator clamps?

Hadn’t even considered those! Great idea : ) thank you!

 

[BearWater]

Hi Bear! I bought a grommett tool kit 'cause, well, I have this addiction to tools. LOL
But all the low tech ideas sound much easier.
Here's the one I got. It worked great, but the ones in the kit were steel and rusted. Don't know if you can use the same tool for aluminum.
Grommet tool

Thank you C appreciate the info! I love to do stuff on the cheap like what i was saying to chucky. But im weird with certain things and really wanted to do the grommets! Haha! I think im going to try and get something going for the first few to flip and then ill be able to get a solid run of the grommets and then redo the non grommeted when the time comes.

 

[BearWater]

I prefer fabric zip ties. Aka velcro,. Dip them in viniger to clean, cut to size. Softer than og zip ties

I’ve only ever used it for cords and costumes could serve a purpose out in the shed for sure! : ) thank you!

 

[BearWater]

All the littles and larf and a couple nugs here and there that were left. Some stuff finished up a little more and some was still right where I left it butter run 2025!

 

[BearWater]

Still have a couple things to do with it, but there are three in for now and flipped tomorrow. I want to play with the heat from the driver of the led for the day, and evening. have both the controllers plugged in along with the new pulse one unit reading the lung room.

the veg room with both littles and mediums are doing good. im going to top dress all them the next watering in prep for there flip (not the littles) those are for next round.

Loaded the soil with Gaia 444 and 284 and fed them with a watered down veg water that had mega 1 part and cal-mag along with the sea-k. I added to that the sweet candy and pk booster. Thats part of why im going to flip tomorrow, i want to see how they take that smorgasbord!

 

[Greenadian]

Look at Point Dexter go!!!! State of the art facility in hos backyard
Great work @BearWater

 

[Justlovetogrow]

Still have a couple things to do with it, but there are three in for now and flipped tomorrow. I want to play with the heat from the driver of the led for the day, and evening. have both the controllers plugged in along with the new pulse one unit reading the lung room.

the veg room with both littles and mediums are doing good. im going to top dress all them the next watering in prep for there flip (not the littles) those are for next round.

Loaded the soil with Gaia 444 and 284 and fed them with a watered down veg water that had mega 1 part and cal-mag along with the sea-k. I added to that the sweet candy and pk booster. Thats part of why im going to flip tomorrow, i want to see how they take that smorgasbord! View attachment 2557570View attachment 2557571View attachment 2557572

The shed has come a long long way since it’s humble beginnings kickin ass mate

 

[BearWater]

Look at Point Dexter go!!!! State of the art facility in hos backyard
Great work @BearWater

Just you wait till i get an Ai thingy muhbob! ill really be nerding out then! hahahah!
thank you Green! its been mostly fun : ) ready for things to be dialed though at this point, im getting tired LOL! itll be the end of me for sure! that or these dang kids!