THE TRAINWRECK. Brought to you by thcfarrmer…..

[JIMKSI64]

View attachment 2568495

Toilet paper roll and foil.
Apple/ screwdriver and a screen.
Cut off bottom of 2 liter mount bong stem in screw cap. Put in bucket with water up to top screw in bong top on to bottle lift up and the air pressure sucks the smoke in take off bong stem and lower the bottle as you get a self inflicted shotgun hit.
When we were young and stupid we would do elevator hits where you hyperventilate and do you hit.
Even the tuff guys fall out about half the time on those...

 

[orggrwr]

Toilet paper roll and foil.
Apple/ screwdriver and a screen.
Cut off bottom of 2 liter mount bong stem in screw cap. Put in bucket with water up to top screw in bong top on to bottle lift up and the air pressure sucks the smoke in take off bong stem and lower the bottle as you get a self inflicted shotgun hit.
When we were young and stupid we would do elevator hits where you hyperventilate and do you hit.
Even the tuff guys fall out about half the time on those...

That brings back some great memories. If i tried that now at 58 I would probably hurt myself.

 

[JIMKSI64]

That brings back some great memories. If i tried that now at 58 I would probably hurt myself.

I know what you mean.
A very long time I was a gymnast. Age 9 to 15 when I got a wiff of this stuff. Rings floor horse and I was very good walking on my hands. I could go up and down stairs but not like a whole flight.
It helped so much later with Martial Arts cause I had a great sense of body position from tumbling during floor.
Now? Now I sleep wrong and I am down for 3 days.

 

[cpurola]

Getting old is not for sissies.

 

[MartyMcFly42oh]

View attachment 2568495

Reminds me of my childhood

 

[Ninjadogma]

Reminds me of my childhood

My carry around was a little red acrylic bong that would fit in your pants pocket. I've looked and looked and I don't even see little glass ones like that anymore. The simple design with just a cylinder with a carb and a stem hole.

 

[MartyMcFly42oh]

My carry around was a little red acrylic bong that would fit in your pants pocket. I've looked and looked and I don't even see little glass ones like that anymore. The simple design with just a cylinder with a carb and a stem hole.

One of the first times I smoked with my old friend Mike , he met me in grocery store parking lot to buy a bag of weed off me. Dude had a little waterproof bag hanging from his shifter on the steering column. I give him the weed and out comes the bong in the bag. His preferred method of consumption was ripping a water bong, while driving a truck. We sat there and packed four or five little bowls in that thing. It was maybe a 5-7 inche long acrylic bong with a metal slide that had the wire two finger grip, so you wouldn’t burn yourself, and metal downpiipe that gave you a free drink of bong water if you hit it too hard.
My first impression of this guy was that he was nucking futs, turns out that he was actually fucking nuts. One of most reckless people I ever hung out with. But at least we were always high out of our minds so it was usually a good time.

 

[JIMKSI64]

I had a 6 shot party bong in the 80's. It was black plastic and I think I bought the 6 shooter cylinder at a local head shop. This was back when the head shops had a selection of parts that were all 8th and 1/4 pipe and everything fit everything else.
Want a 2 bowl Y pipe with a weed chamber in the middle?
Put a 1 gram wooden bowl on your bong?

Endless Choices.

 

[JIMKSI64]

I had a 6 shot party bong in the 80's. It was black plastic and I think I bought the 6 shooter cylinder at a local head shop. This was back when the head shops had a selection of parts that were all 8th and 1/4 pipe and everything fit everything else.
Want a 2 bowl Y pipe with a weed chamber in the middle?
Put a 1 gram wooden bowl on your bong?

Endless Choices.

 

[PlumberSoCal2]

Watching Tremors

Laughing hysterically. Filmed in Lone Pine, CA. Fun movie

 

[brusselsf4]

So hey anyways I also grow pot and I have one plant that is not stacking much and putting energy into bracts.

View attachment 2568448View attachment 2568449View attachment 2568450
Only plant doing this. Fur is much more white and not nearly as puffy puff balls on the other 106 tops
I zoomed in behind the closeup and there is lower growth just stacking them berries!

Leave it. From wat ive seen, and for refererence see blockhead f4 regular (single cola) vs "potent" pheno by beanhoarder.


forgive my ignorance but wat is the strain???

 

[brusselsf4]

Apples and cans were some of the first things i smoked out of.. gravity bong was the second lol. ive smoked out of apples but a screw driver then woodson spoon through a potato , stick a socket in it, , the right size but 1" at least can easily hit better than most

 

[Putthataway]

I have been in the auto business for 4 decades. I too have heard the stories about them damn lying shops who sell stuff you do not need.
Now I know there are shops like that.

But there are a lot more shops that can not properly fix complex vehicle systems without throwing every part they can think of at the job.
When I see a bill that has 2 rotation speed sensors and throttle sensor a coil and a PCM I know that it was a parts hanger. Yes the car is fixed but the chain of events that led to 4 primary mission critical parts failing at the same time is just not possible unless the vehicle was struck by lightening.
Same result as a thief. Bill was to high to repair the vehicle.

Depends. The evap system in late 90s Honda’s had issues with the purge valve going bad it would burn the circuit on ecu along with another emissions valve driving with the p1457. There was tsb’s on it. Meaning it happened often enough that it was covered under warranty but a recall wasn’t issued. My friend in Connecticut worked as the service writer at a Toyota dealer around 2018 and certain vehicles would get water intrusion in the evaporative emissions system which they had to replace most of the evap components that fried because they designed for exhaust gases not water in the system.

 

[Putthataway]

View attachment 2568495

Now a days the parts are going cost $40

 

[voltage]

Ya I tapped out early on the latest one.
He said something that really got me going.
' my knowledge exceeds my experience '

There is one saying that fits this situation.
" You have been educated past your intelligence level '

He does not have the real world and scientific background to understand what he is learning.

Then he did a photo dump

Its called the Dunning-Kruger effect.

 

[JIMKSI64]

Leave it. From wat ive seen, and for refererence see blockhead f4 regular (single cola) vs "potent" pheno by beanhoarder.


forgive my ignorance but wat is the strain???

Apple Fritter Auto.
Have grown 4 to harvest and have 9 in 2 tents and it's the only presentation like this one.

 

[amneziaHaze]

71

Ya I tapped out early on the latest one.
He said something that really got me going.
' my knowledge exceeds my experience '

There is one saying that fits this situation.
" You have been educated past your intelligence level '

He does not have the real world and scientific background to understand what he is learning.

I saw the topic and was really interested then the first photo was basicly a lolipop haha but first comment with confusion was the best XD

 

[oldtimer1960]

View attachment 2568495

I was a heavy equipment operator for years and I specialized in sewer main and water main installation and we always kept a couple of those bowls in our service truck, boss just thought they were fittings that we used daily.

 

[Florida_Mike]

I was a heavy equipment operator for years and I specialized in sewer main and water main installation and we always kept a couple of those bowls in our service truck, boss just thought they were fittings that we used daily.

I was an operator and later a foreman on a mainline pipe crew in Fl. Did both new sub divisions and road work. When doing sub divisions, they gave me all the deep sanitary and all the deep, wet storm drain. I had a brand new PC 400 Komatsu. My crew was usually the 1st on a new site; I'd set deep lift stations and come out of them. After I got a bunch of the deep runs in, they would then bring other crews in to continue with shallower storm runs, water, reclaim etc. The companies did full site development; from clearing and grubbing and pond digging, all the way to road base. Paving and concrete work (other than storm and sanitary inverts) were the only things subbed out. I miss it.

 

[voltage]

Wakey bakey.