THE TRAINWRECK. Brought to you by thcfarrmer…..

[Ninjadogma]

I built this 7 x 9' greenhouse
View attachment 2585414
Back in 2014. I've re-wrapped it twice a year since
View attachment 2585416
For the past year+ the tree next to it started to lean into it and I had to abandon using it out of caution last year of concerns of it giving way and it has finally come down
View attachment 2585417View attachment 2585418
Which is actually good news as in its current position I can much easily cut it up and clear the area for a new and larger greenhouse.

I do have a lot of work to clear it all out but something I can take my time with and I have no plans to start the new one until spring.

My wife would have been arguing for me to cut that tree down and today I would be saying, "See? Procrastination paid off!"

 

[PlumberSoCal2]

I really do love her a lot

She inhaled the sandwich

 

[Crazyformes]

Lets put it this way, I try to get enough nutrients at a time to last at least a year at a time so I only have to bite the bullet once. Im no where near the amount of plants capt has, but I'm also not only running a tent and my grows fluctuate in size depending on what's going on. And liquid nutrients are quite a bit more expensive on shipping, Idk if you ever looked at prices of buying bulk for cyco nutrients, compared to other brands, alone brand switching has the biggest part of the $1500 a year.

I ....ahhh....duh....bought a 25 pound bag of Green leaf Sweet Candy thinking it was the mega crop....that should be enough to last me 100 years.

 

[PlumberSoCal2]

Just checked the seeds

Two full days and i don't (can't) see any popping yet. I'll be adding a bag of Skunk Fritters today. I better start work on that downed tree 'cause I NEED more room

 

[pnwbluntman]

I ....ahhh....duh....bought a 25 pound bag of Green leaf Sweet Candy thinking it was the mega crop....that should be enough to last me 100 years.

At least you got the most expensive part of their nutrient line , so now you can make that last and just get the rest here and there. And if you run hydro with reservoir or anything that you fill by volume and is where you would start burning through that quickly through a couple years. I think that's where most people don't understand why some people go through more nutrients then others, I have been pretty stoned lately lol to explain why someone would want to stock up on nutrients in bulk.

 

[Crazyformes]

I really do love her a lot
View attachment 2585434View attachment 2585435View attachment 2585436
She inhaled the sandwich

Did you give her any sausage?

 

[Crazyformes]

At least you got the most expensive part of their nutrient line , so now you can make that last and just get the rest here and there. And if you run hydro with reservoir or anything that you fill by volume and is where you would start burning through that quickly through a couple years. I think that's where most people don't understand why some people go through more nutrients then others, I have been pretty stoned lately lol to explain why someone would want to stock up on nutrients in bulk.

What mix of Greenleaf do you use for hydro...veg? flower? Do you have a formula....I run hydro by 5 gal

 

[pnwbluntman]

I have been medicating pretty hard the last few days staying stoney, pretty sure either a plate or screw in my knee needs replacement

What mix of Freenleaf do you use for hydro...veg? flower? Do you have a formula....I run hydro by 5 gal

I'm not running green leaf. I run cyco atm. I'm switching to floraflex

 

[pnwbluntman]

Keep feeling a crunch and a pop with each step with pain, knee surgeries suck, these are both sides of my right knee, sorry for the shitty picture, I don't have the tops of my fibia and tibia, and the bottom of my patilla is removed already with some sort of plastic knee cap, something is coming loose

 

[Crazyformes]

View attachment 2585442View attachment 2585443
Keep feeling a crunch and a pop with each step with pain, knee surgeries suck, these are both sides of my right knee, sorry for the shitty picture, I don't have the tops of my fibia and tibia, and the bottom of my patilla is removed already with some sort of plastic knee cap, something is coming loose

Ouch....I have had my left knee replaced quite some time ago, left shoulder 3 years ago and right shoulder recently. Had spine surgery as well....at least im on this side of the grass.. and weed.

 

[pnwbluntman]

Ouch....I have had my left knee replaced quite some time ago, left shoulder 3 years ago and right shoulder recently. Had spine surgery as well....at least im on this side of the grass.. and weed.

That's sucks, I understand the pain of all of those, I'm a pretty broken man myself, my knee filled with fluid the last couple days making everything suck, I had to do some tree work, I do contract tree climbing here and there and man I think spiking up the tree caused something to come undone

 

[pnwbluntman]

Omg! I just found the coolest idea I have seen in a long ass time and I love it, Lego grow tents! This is a thing?! I'm going to get Legos rn! My kids can suffer I'm only playing... They don't play with legos!

 

[pnwbluntman]

Check out brickgrow on Instagram if you want to know what I'm talking about

 

[pnwbluntman]

He is even using the legos to auto feed I just can't even process this rn lmfao

 

[JIMKSI64]

Omg! I just found the coolest idea I have seen in a long ass time and I love it, Lego grow tents! This is a thing?! I'm going to get Legos rn! My kids can suffer I'm only playing... They don't play with legos!

Funny you should say that as I have thought ever since I started to look at grow tents that injection plastic with a vacuum chamber like a big cooler would have been structurally more sound, light and heat/cold stable. Standard 2x2 and 4x4 sections like Legos cutouts for fan duct runs bulkheads for hydro and all electrical runs. Hinged doors.
Light manufacturers would have built top sections on the template for a drop in fit at ceiling level.
Bottom floor section with 12 inch pull up scissors style support panels to raise and lower plants.
CO2 support would be very easy. Could be yet another panel you install that you plug in and screw your CO2 cartridge into.
Same for RDWC chemicals and nutrient. System built into the panels.
Again the heart of the system is the very cheap injection plastic panels with the strength and rigidity of a well made cooler.

 

[PlumberSoCal2]

Funny you should say that as I have thought ever since I started to look at grow tents that injection plastic with a vacuum chamber like a big cooler would have been structurally more sound, light and heat/cold stable. Standard 2x2 and 4x4 sections like Legos cutouts for fan duct runs bulkheads for hydro and all electrical runs. Hinged doors.
Light manufacturers would have built top sections on the template for a drop in fit at ceiling level.
Bottom floor section with 12 inch pull up scissors style support panels to raise and lower plants.
CO2 support would be very easy. Could be yet another panel you install that you plug in and screw your CO2 cartridge into.
Same for RDWC chemicals and nutrient. System built into the panels.
Again the heart of the system is the very cheap injection plastic panels with the strength and rigidity of a well made cooler.

Start designing and get production going. This could be the next big thing

 

[pnwbluntman]

Funny you should say that as I have thought ever since I started to look at grow tents that injection plastic with a vacuum chamber like a big cooler would have been structurally more sound, light and heat/cold stable. Standard 2x2 and 4x4 sections like Legos cutouts for fan duct runs bulkheads for hydro and all electrical runs. Hinged doors.
Light manufacturers would have built top sections on the template for a drop in fit at ceiling level.
Bottom floor section with 12 inch pull up scissors style support panels to raise and lower plants.
CO2 support would be very easy. Could be yet another panel you install that you plug in and screw your CO2 cartridge into.
Same for RDWC chemicals and nutrient. System built into the panels.
Again the heart of the system is the very cheap injection plastic panels with the strength and rigidity of a well made cooler.

I was going over all the benefits in my head, and you pretty much nailed every single point I was thinking. If you were to 3D print sections of a grow tent that can be put together and sealed using either a silicone gasket for removal or storage, that way it could snap together and be air tight, using like an insulated blanket to cover it with for colder climates or just having the plastic by itself for warmer climates, plastics thermal retention heat is pretty efficient, if you get it cool it stays cool, you get it warm it stays warm for a while

 

[Crazyformes]

That's sucks, I understand the pain of all of those, I'm a pretty broken man myself, my knee filled with fluid the last couple days making everything suck, I had to do some tree work, I do contract tree climbing here and there and man I think spiking up the tree caused something to come undone

Yes sir....I'm going to get my teeth replaced with veneers... that way when I'm laying in my casket....I look good.
....like Chicklets....

 

[pnwbluntman]

Yes sir....I'm going to get my teeth replaced with veneers... that way when I'm laying in my casket....I look good.
....like Chicklets....

Shoot rn I'm thinking we could use Legos for everything, I'll give you a set of teeth for a great price! It will be Legos not veneer lol you ever stepped on a Lego?! I'm sure it could chew food, and you could replace em easily

 

[JIMKSI64]

I was going over all the benefits in my head, and you pretty much nailed every single point I was thinking. If you were to 3D print sections of a grow tent that can be put together and sealed using either a silicone gasket for removal or storage, that way it could snap together and be air tight, using like an insulated blanket to cover it with for colder climates or just having the plastic by itself for warmer climates, plastics thermal retention heat is pretty efficient, if you get it cool it stays cool, you get it warm it stays warm for a while

There would be an air gap vacuum chamber. It would have the insulation rating of a cooler.
Or if that's to expensive a hole tap that you put about 3 cans of expanding foam into the 4x4 panel. Optional heavy duty insulation.