Yeah, that’s what I’ve been doing! 25 is a slow draining son of a bitch! Here’s what I got the first cleaning! 75, 45, 25! Looks kind of green, but might lighten up when it dries! Got one more cleaning to go and then call it cool! Might be whipping a dead horse here! We will see in a few days.
Looks good, mine actually tends to darken as it dries, but I put the screen on a plate on top of the oven, it provides a little heat when I use the oven, and the outside of the hash oxidizes, usually the darker the better. When you break a piece off, the inside is that green black hashy color. BTW, I would store the final product in the freezer, because if you don't get all the water out, it will mold! (as me how I know)
I lived, and learned! Once it's completely dry it's pretty much indestructable, but I still store it sealed in a freezer, it's dark, and dry, minimal air contact, and the cold pretty much stops the THC from deteriorating.I know where you’re coming from! When I first started, I had a few pieces molded up! Now I let it sit out for at least a few days before it goes in to the freezer, which I do store it in! The ones that molded for me had a lot of contaminate in it though! Yeah, you have to make sure that you’ve gotten most of the water out! Right on brother! Fun to play with! I actually stored a temple ball wrapped in cellophane for over two years in a drawer at room temperature without any ill effects! You got a really fuck up before molds up!
Yeah, that two year-old stuff was wrapped in cellophane and stuffed into a film canister! It did a lot of morphing over that period of time! Never saw a freezer or refrigerator! There is definitely some kind of cure going on!
how? you mixed everything in the garbage can than let it all drain out through the bags? as long as the bottom pail has holes in it, just wash each bag with the hose for a good bit especially if there’s lots than wash/clean longer, smaller micron same thing wash/clean longer,..
I thought the bigger surface area might clog, less easily, causing back ups! There are times when I see the water coming out around the rims instead of down through the bags! Then I have to shut her down and let them drain! Maybe I’m trying to put too much water through them too fast! If the water came out the bottom as fast as it went in the top or even close to as fast, I think things would work a little better! But I’m new at this so maybe I just have to pull the rings more often And clean the bags out! Or pull the rings and blast the material and put them back together and continue! The blasting clears the bags pretty quickly! Sorry about the delay! I had to get my pregame nap in! Sharks versus Red Wings tonight!
Jesus! Don’t let Cpurrrr see that! Lol!
well yes either do a slower drain or watch the water level of the 25 or 45 micron bag to stop draining,.. your bags are all mesh??I thought the bigger surface area might clog, less easily, causing back ups! There are times when I see the water coming out around the rims instead of down through the bags! Then I have to shut her down and let them drain! Maybe I’m trying to put too much water through them too fast! If the water came out the bottom as fast as it went in the top or even close to as fast, I think things would work a little better! But I’m new at this so maybe I just have to pull the rings more often And clean the bags out! Or pull the rings and blast the material and put them back together and continue! The blasting clears the bags pretty quickly! Sorry about the delay! I had to get my pregame nap in! Sharks versus Red Wings tonight!
i quit using the 25 and replaced it with the 45 micron, 25 is just too much junk, 45 is a bit better/useful,.
I hear ya! I just used the 25 to see if anything was getting past the 45! I haven’t tried to press it yet! 45 is pretty small in its own right! 25 is downright microscopic! And yeah, they’re all mesh. Hell on that cannoli video he only uses like a 160 and a 45! If I remember right!
Sinaloa hash!
