Magnums twelve site aircube grow

[JIMKSI64]

Nod to the solo cup sensor cover.
I change colors every grow.
Running out.

 

[Magnumsmydog]

Nod to the solo cup sensor cover.
I change colors every grow.
Running out.

Thank you for the inspiration man

 

[Magnumsmydog]

After a busy night in the laboratory, I have got it set up and running......yes ph a Lil low had a mishap. So that to say it but I just about lost faith in this whole ac infinity stuff. I spent a ton of fucking money only to find out that

1. Water sensor performs fine if not using controller as ai......fucking lame

2. The dumbass sensor ports can't use what I have just purchased with ai because you need a sensor and a device and kept giving errors

3. Extension of my rambing about said sensor port with only 2 spots i need more and no support for that at the time, lesson learned got me with that one.

4. Now my controller must be inside the room to even read temp humidity vpd shit using the outside built in sensor and I can no longer control vpd or anything that relies on it.....most my shit heater, ac, humidifier, dehumidifier.

Moral of this shit story is they @ACINFINITYINC arent there yet for full automation. I could have went with a number of other companies and spent far less

I feel like a dirty company tramp.....DISAPPOINTED!!!!!

 

[TerpBeans]

Well that really sucks bro!! Maybe you could take the big ass banner down, use it to wrap up all the gear that doesn't do what ya wanted, and ship it all back

 

[Magnumsmydog]

No shit if I wouldn't have hung that first it wouldn't have made it up there the disappointment is huge and that fucking banner will be coming down when I get off work tomorrow. Promise that

 

[Magnumsmydog]

The shit is great in theory and quality shit, but if it can't work with Ai mode then wtf is it for

 

[Grownsince95]

Anybody else using the @ACINFINITYINC water sensor, think i got a bunk one off Amazon. Mainly stays no water detected even tho it submerged but once in awhile says yes, first topping off and flooded basement luckily I set max run time

After a busy night in the laboratory, I have got it set up and running......yes ph a Lil low had a mishap. So that to say it but I just about lost faith in this whole ac infinity stuff. I spent a ton of fucking money only to find out that

1. Water sensor performs fine if not using controller as ai......fucking lame

2. The dumbass sensor ports can't use what I have just purchased with ai because you need a sensor and a device and kept giving errors

3. Extension of my rambing about said sensor port with only 2 spots i need more and no support for that at the time, lesson learned got me with that one.

4. Now my controller must be inside the room to even read temp humidity vpd shit using the outside built in sensor and I can no longer control vpd or anything that relies on it.....most my shit heater, ac, humidifier, dehumidifier.

Moral of this shit story is they @ACINFINITYINC arent there yet for full automation. I could have went with a number of other companies and spent far less

I feel like a dirty company tramp.....DISAPPOINTED!!!!!

I bought the ACI 69 pro to control my old version cloud line fans. The website is very clever about misleading folks to believe it will work with older equipment. They even sell "adapters" that work opposite as advertised. You can hook up a new fan to an old controller but not the other way around.

Long story short. If you want to upgrade your old "dumb" 3 pin ACI fans with a new controller, you can't. Maybe one day I'll spring for new fans but not until these crap out.

For now I'm stuck with a $100 VPD calculator that turns my heater and humidifier on and off.

 

[Magnumsmydog]

So after messing around tonight I can run everything not all of it is ai like pumps and uv, and I can't run the auto top off or light sensor until they actually release the sensor hub.

It is actually keeping nutes and ph perfect, I just gotta go down every night and crack the valve to fill reservoir after lights out and it brings it back perfect before it fills the bucket

Still disappointed with all the sensors and no way to use em all at same time yet but it does work with standard programming but not in ai......kinda misleading but very cool as it works

 

[Magnumsmydog]

Had a skunk fritter dude show up to party, but the root mass was pretty impressive

 

[Magnumsmydog]

Now to figure out to clean this leca

 

[TerpBeans]

Thats just all roots

 

[trygrowup]

Now to figure out to clean this leca

Burn it

 

[Magnumsmydog]

Burn it

Shit didnt think of that

 

[TerpBeans]

Uae one of those roofers torches and a bbq tank!!! LOL

 

[Magnumsmydog]

Uae one of those roofers torches and a bbq tank!!! LOL

Really was the only drawback I seen to it when I was planning this setup

 

[TerpBeans]

Yeah, that would get expensive of you throw it out every grow! Not a hydro guy, so not too sure of the easiest way to go about removing the roots!? Wonder of its easier when they dry up!?

 

[Magnumsmydog]

It's not really stuck to it but it a mess for sure got it drying for now and will see what happens

 

[TerpBeans]

That'll be one of those jobs...... I'll get around to it type thing

 

[Brother_Antioch]

I bought the ACI 69 pro to control my old version cloud line fans. The website is very clever about misleading folks to believe it will work with older equipment. They even sell "adapters" that work opposite as advertised. You can hook up a new fan to an old controller but not the other way around.

Long story short. If you want to upgrade your old "dumb" 3 pin ACI fans with a new controller, you can't. Maybe one day I'll spring for new fans but not until these crap out.

For now I'm stuck with a $100 VPD calculator that turns my heater and humidifier on and off.

I've got the Spider Farmer GGS system myself, but just use it to run the lights and monitor the environment. My AC Infinity heater and my Vivosun humidifier both have their own automation, so I keep the heater at 70F and run the humidifier to be triggered by VPD. Dead steady, all day and night. I'll end up getting the new exhaust fan and clip on fans from SF so I can use them with the controller, but that'll be the extent of my automation experiment.

 

[Magnumsmydog]

I've got the Spider Farmer GGS system myself, but just use it to run the lights and monitor the environment. My AC Infinity heater and my Vivosun humidifier both have their own automation, so I keep the heater at 70F and run the humidifier to be triggered by VPD. Dead steady, all day and night. I'll end up getting the new exhaust fan and clip on fans from SF so I can use them with the controller, but that'll be the extent of my automation experiment.

After calming down and doing some trials I got it all working beside auto res fill and light co2 meter until they get the sensor hub produced, its actually running really good as far as keeping res in check