Magnums twelve site aircube grow

[WinJr63]

Bury it out in ur yard, and see what happens , yeah a new sprout!

 

[JIMKSI64]

I've got the Spider Farmer GGS system myself, but just use it to run the lights and monitor the environment. My AC Infinity heater and my Vivosun humidifier both have their own automation, so I keep the heater at 70F and run the humidifier to be triggered by VPD. Dead steady, all day and night. I'll end up getting the new exhaust fan and clip on fans from SF so I can use them with the controller, but that'll be the extent of my automation experiment.

Unless the automation on the fans for ACI is way better then the Vivosun fans I found they work better under local control. My 2 fans in the 48x48 run way different and no option in automation to make that happen.

 

[Brother_Antioch]

Unless the automation on the fans for ACI is way better then the Vivosun fans I found they work better under local control. My 2 fans in the 48x48 run way different and no option in automation to make that happen.

Well, I also have the SF AC10 power supply that connects to the GGS controller. From what I've read, and from what limited testing I did with the various equipment by plugging it in and playing with the various settings, the controller should be fine with their new fans and exhaust fan. The heater and humidifier are working fine on their own local controls, so I'm not even thinking of touching them. I will most likely pick up 2 new clip on fans in the next 1 to 2 weeks anyway, as my girl is really starting to bush out and push up a bit since flipping to 12/12 a week ago. Ideally, I'll have one oscillating fan aimed under the canopy, another aimed just above the canopy and a third above the light to push the heated air around and reduce the load on the exhaust fan. If I can get them to work through the GGS controller, great. If not, no big deal as they're quality units anyway.

Cheers,

BA.

 

[Magnumsmydog]

Went in and did some opening up of the monster cropped plants, looks like wild animals been bedding down in there .

Anyway systems running great, I got it dialed in perfect with feed frequency vpd and light, pedal is to the floor and we will see how they react. Have a feeling its gonna be most massive growth I've had!!

 

[Magnumsmydog]

Being able to watch ec climb during the daily feedings is really proven to be helpful, I can raise or lower ec by seeing if its climbing or not, after dropping it stays more level. If I drop too far it starts falling off.

 

[Magnumsmydog]

Plants are telling me everything's perfect they are doing fantastic. Loving the new setup so far

 

[Magnumsmydog]

Been working on humidity spikes since I was a lazy ass and didnt defol the shit outta the monster cropped plants. I decided the floor fan was actually making it worse during fills so removed that ti see what happens, moved dehumidifier up to catch the important air, and temporarily removed solo cup cover from sensor, gonna give it a day and see if it still has any swings......

What a pain in the ass

Now for the flower room meatbreaths and 80s skunk have been topped, tiger queens and cherry slurpees are popping as well

 

[Magnumsmydog]

And yes the the meatbreath and skunks arent too fond of the temporary high humidity for the babies.....they will survive

 

[BearWater]

Looking fabulous in there Mag!

 

[Magnumsmydog]

Looking fabulous in there Mag!

Thanks bear its definitely getting g there just hard when my hands so shit I can't hardly dump buckets so here's where I've ended up . Really thinking about a clone run of critical or big bud to see just how far i can push em, wife be side eyeing me like a wild dog when I spend

 

[BearWater]

Thanks bear its definitely getting g there just hard when my hands so shit I can't hardly dump buckets so here's where I've ended up . Really thinking about a clone run of critical or big bud to see just how far i can push em, wife be side eyeing me like a wild dog when I spend

yeah i put in work orders and requests to upper management… sometimes the request goes through

 

[Magnumsmydog]

yeah i put in work orders and requests to upper management… sometimes the request goes through

Lmao thats a good one, might have to give it a try, recently been on a seed collecting binge from other growers on another site so have a ridiculous amount already but not just them, if u ever see anything I grow that peeks your interest reach out and ill hook u up man, what its all about right, could dm ya a list as well to see if anything stands out

 

[BearWater]

Lmao thats a good one, might have to give it a try, recently been on a seed collecting binge from other growers on another site so have a ridiculous amount already but not just them, if u ever see anything I grow that peeks your interest reach out and ill hook u up man, what its all about right, could dm ya a list as well to see if anything stands out

Thank you brother! I’ll definitely let you know! : ) at the moment I’ve got my gear and im trying to get through some of it before anymore acquisitions! cant push anymore of them to the side hahaha!

thank you Mag!

 

[Magnumsmydog]

Little update photo of flower room 5 min before lights out

Built some veg dwc buckets for clone transition to flower room, been laying in garage and gotta scrub em still but they are built

 

[Magnumsmydog]

Got a few things done this evening in the veg tent, didnt have the 3 bigger girls in there yet for the pic but its pretty nice

 

[Magnumsmydog]

Few lights out pics

 

[Magnumsmydog]

Got more done converting over to full hydro......pretty tired now, gonna hunker down for the storms!!!

 

[Magnumsmydog]

Things are running stable!!! Love that shit

 

[Magnumsmydog]

At day 42 just patiently waiting

 

[Redneckx]

Few lights out pics

Looking
But watch out the nitrogen levels, they're way too high, your already in or running into a N tox!