Plant looks to be dieing

[JIMKSI64]

Also if it's RO water 900 is 3/4 feed and that does not look like a 3/4 feed rate plant yet but if the others are fine and this one spikes again I would drop to 700 in this bucket only. If your base water is 300ppm then things change

 

[Magnumsmydog]

100%

 

[WinJr63]

Tent temp stays around 85 and the humidity 55

This is only happening to the one plant out of 3

85 f and 55 rh ur vpd is around 1.85, I say ur cooking it dry.

 

[Ninjadogma]

Tent temp stays around 85 and the humidity 55

This is only happening to the one plant out of 3

That's why I was assuming if you were going through a manifold maybe that one gets short changed but if it's got good bubbles it's got good bubbles.

 

[Magnumsmydog]

85 f and 55 rh ur vpd is around 1.85, I say ur cooking it dry.

Yea was pickling it with it that hot

 

[madgrower666]

Looks like calmag cause of spots but what do ik

 

[JIMKSI64]

Yea was pickling it with it that hot

I have seen hydro guys work huge VPD numbers. If the problem was spread I would consider it.
Op. Still need to know where the water level was at 2800 ppm.

 

[Magnumsmydog]

I have seen hydro guys work huge VPD numbers. If the problem was spread I would consider it.
Op. Still need to know where the water level was at 2800 ppm.

I've ran 1.9 vpd with 3+ ec but it was riding the line in my setup, and im ebb and flow in flower room and dwc in veg tents