Lighting for 4x2x6 tent

[FreshCoast248]

I have two blurple KINGLED 2000w lights and a 4x2x6 tent, I know these lights don't run at 2000w, not even close. I only plan on having 2 plants in the tent. I plan on using one light until they're big enough then I'll add the second light. Will this be enough all the way to harvest? Should I get some smaller white bar lights to put in corners? And should I keep both veg and bloom settings on for the blurples?

Thanks in advance guys, first time growing.

 

[JIMKSI64]

Do you have the actual specs on the light. If it's a kp2000 kingled it's a 200 watt panel. 2 of these will power 2 plants fine.
Look at the tag and post the voltage and the amps and do some maff.

 

[FreshCoast248]

Do you have the actual specs on the light. If it's a kp2000 kingled it's a 200 watt panel. 2 of these will power 2 plants fine.
Look at the tag and post the voltage and the amps and do some maff.

 

[JIMKSI64]

Welp, donno.
They do not have an amp rating and the wattage is preposterous.
You will need a light measurement tool or be prepared for an investment in lights if these will not power your grow.

 

[greengrower73]

Those are 2000W NOT 2000 Watts, They all do that for some reason those are 200 watt lights, 2 -2000W If they were 2000 watts each they wouldn't work on a single 15 amp circuit. 4000watts is close to what home dryers draw. Even a single 2000watt would be iffy on a 15 amp circuit that's designed to blow around 1800 watts

 

[FreshCoast248]

Those are 2000W NOT 2000 Watts, They all do that for some reason those are 200 watt lights, 2 -2000W If they were 2000 watts each they wouldn't work on a single 15 amp circuit. 4000watts is close to what home dryers draw. Even a single 2000watt would be iffy on a 15 amp circuit that's designed to blow around 1800 watts

400 watts should be sufficient for 2 plants in 8 sq. Ft yeah?