Hey dunit, can't wait for your update.
Well I finally got my tent and it's all setup but I am having some issues with Temp and Humidity and wondered if you had any suggestions or anyone for that matter.
Basically as stated before I have a 2x2x5.25 tent. I rigged up a 100 CFM fan to a vent in the top.
I had a clip on fan at plant level and my Magnum hanging about 14" from the tops. I had one of the vent flaps ajar.
I was getting readings of 80-85f and 30%rh
So I went to Wallmart and bought a 2G Humidifier and squeezed it in the tent Humidity went up a little but temp went way up to around 90f since the unit produces heat.
So I placed it beside the tent's vent on the outside which was not making a huge differencedifference in humidity I think cause the steam was rising above canopy level by the time it entered the tent.
So then I took the Clip on fan, fit it into one of the Ducting holes and put the Humidifer near the intake of the clip on fan on the outside of the tent, and then sealed the Passive velcro vent beside the duct vent so all the Humidity would enter through the fan and blow accross the plants.
I am now sitting at about 80-86f and about 45-50rh, mind you the rh may go higher if I leave it for longer without checking it but I think 45-50 isn't terrible for veg is it? I know 60 is likely ideal area.
So what do you think of these numbers? I would like to try and bring down that Temperature as I am not currently running any Co2. I am open to suggestions.
The room itself sits at around 75-78f. I do have a in Window AC unit I can install but not sure if that will even affect the tent's Temp as warm mist is spewing in from the Humidifier and if I took the humidifier away from the tent and left it in the room and used AC the AC would reduce Humidity wouldn't it?
Geez that explantion got long quickly, I think it may be time to start my own thread.
Any suggestions for now?