Council Of First Knowledge, Jedi Temple Training Facility

Cityfarmin said:

Check this out, I put some plywood over a ladder and screwed it in place with some long screws and bolts, then I attached a 6inch exhaust fan and ran it out the hole in the plexiglass. It seems to be working so fat

Click to expand...

Is it workin? How long has it been running so far?

@EventHorizan no it was me who’s ec was why too high haha..

Cityfarmin said:

Check this out, I put some plywood over a ladder and screwed it in place with some long screws and bolts, then I attached a 6inch exhaust fan and ran it out the hole in the plexiglass. It seems to be working so fat

Click to expand...

I want a pic of that ledge and the window?

EventHorizan said:

I want a pic of that ledge and the window?

Click to expand...

This is the bes I could do for now

Also check this out!

Made a table for my flood tray, it came out too big cause the Home Depot dick cut it too long but I’ll fox that, it’s just 1-2 inches on each side.

Toph420 said:

Is it workin? How long has it been running so far?

@EventHorizan no it was me who’s ec was why too high haha..

Click to expand...

Yea seems to be, room was 89 degrees and it’s now 79 and dropping. I think I got it!!! Thanks a lot man.

I was thinking about doing it but I was nervous about drawing attention with it exhausting to the shaft of another room. I think if I run it while I’m here everything should be fine

Or i

Cityfarmin said:

Also check this out!

Made a table for my flood tray, it came out too big cause the Home Depot dick cut it too long but I’ll fox that, it’s just 1-2 inches on each side.

Click to expand...

might just say fuck it and cut a piece of styrofoam to fit the 38x38, cut some holes for the table and Res in the styrofoam and call it a day. Bro Home Depot has water pumps that cost 200$, Im just gonna stop by my hydro guy tomorrow early

So my advice to you, is buy the 500 watt diy kit from chill led and replace the hps light..
get a 315cmh for veg..

Cityfarmin said:

Or i

might just say fuck it and cut a piece of styrofoam to fit the 38x38, cut some holes for the table and Res in the styrofoam and call it a day. Bro Home Depot has water pumps that cost 200$, Im just gonna stop by my hydro guy tomorrow early

Click to expand...

they got 20 ones too..

EventHorizan said:

they got 20 ones too..

Click to expand...

Not the one I went to, I was like wtf 200$?? So I asked someone who worked there and they said cheapest was 99$

EventHorizan said:

So my advice to you, is buy the 500 watt diy kit from chill led and replace the hps light..
get a 315cmh for veg..

Click to expand...

This is for me? Just asking cause there’s no quote or tag

Cityfarmin said:

Or i

might just say fuck it and cut a piece of styrofoam to fit the 38x38, cut some holes for the table and Res in the styrofoam and call it a day. Bro Home Depot has water pumps that cost 200$, Im just gonna stop by my hydro guy tomorrow early

Click to expand...

dude...hydrostore $20.00 250gph pump
perfect for Flood n Drain

Wisher619 said:

dude...hydrostore $20.00 250gph pump
perfect for Flood n Drain

Click to expand...

Was about to say the same thing.. I’m using a 160gph pump for my veg table and it works great, I already had it so figured midswell..

Veg update, yes I checked the ec again haha, 1.4.. I forgot to ask, could the tea feeding have made my ec go up crazy high if some of it drained back into res?

Seems like everyone is praying, I’m happy..

Toph420 said:

Was about to say the same thing.. I’m using a 160gph pump for my veg table and it works great, I already had it so figured midswell..

Veg update, yes I checked the ec again haha, 1.4.. I forgot to ask, could the tea feeding have made my ec go up crazy high if some of it drained back into res?

Seems like everyone is praying, I’m happy..

View attachment 756545

Click to expand...

it is possible

Wisher619 said:

it is possible

Click to expand...

Yea I’m gonna go tomorrow, but since I was at Home Depot getting pvc pipes to build the flood table I figured I see if they had the pump and they didn’t, so I was just keeping updated. I’m gonna go to my hydro guy tomorrow, I know for a fact he has it. I was just shocked that the Home Depot I went to only had ones $99 at the cheapest. But it’s all gravy. I got the a/c unit locked in, got the table built ( I’m just gonna throw some styrofoam on top and cut hole in it where needed and I’ll setup my flood table tomorrow.

I do have a question though.

My flood tables were originally bought so I could catch the run off and it not spill onto the floor of my tent. That in mind they are only 3/4 of a inch high, meaning the walls, will that be high enough to flood and allow the plants to feed and grow?

Should I just fill the table with clay pebbles and space my plants in the clay 12 inches apart or should I try to run them in net pots and/or coco?

I’m prob asking a lot of stupid question but I have only grown in soil for the past 2 grows. So I need all the info I can gather and any help is much appreciated.

Cityfarmin said:

This is for me? Just asking cause there’s no quote or tag

Click to expand...

Yea it's for you bud. Led and cmh put out less heat than hps

incogneato said:

Yea it's for you bud. Led and cmh put out less heat than hps

Click to expand...

I kinda looked it up, if its really cost that much I'll have to hold off on that.
I can't spend 700$ on a light right now, Maybe there are cheaper one I just have to look harder

Cityfarmin said:

Yea I’m gonna go tomorrow, but since I was at Home Depot getting pvc pipes to build the flood table I figured I see if they had the pump and they didn’t, so I was just keeping updated. I’m gonna go to my hydro guy tomorrow, I know for a fact he has it. I was just shocked that the Home Depot I went to only had ones $99 at the cheapest. But it’s all gravy. I got the a/c unit locked in, got the table built ( I’m just gonna throw some styrofoam on top and cut hole in it where needed and I’ll setup my flood table tomorrow.

I do have a question though.

My flood tables were originally bought so I could catch the run off and it not spill onto the floor of my tent. That in mind they are only 3/4 of a inch high, meaning the walls, will that be high enough to flood and allow the plants to feed and grow?

Should I just fill the table with clay pebbles and space my plants in the clay 12 inches apart or should I try to run them in net pots and/or coco?

I’m prob asking a lot of stupid question but I have only grown in soil for the past 2 grows. So I need all the info I can gather and any help is much appreciated.

Click to expand...

Dang 3/4” is pretty low for a flood tray bro, your way better off running drain to waste if possible. it’s pretty much just as easy as flood and drain but you have to run tubing to each plant.. can anyone point him in the right direction on how to set that up..?

Cityfarmin said:

I kinda looked it up, if its really cost that much I'll have to hold off on that.
I can't spend 700$ on a light right now, Maybe there are cheaper one I just have to look harder

Click to expand...

If you got the A/C workin your good for now, don’t worry about getting those lights until you’ve done however many cycles..

Wisher619 said:

that there my man....is serious Ca issues

Click to expand...

Ok. Good to know. Thanks!
Harvest is in about 3 weeks.
Is it worth trying to fix this far along?
Just dropped the ec to 1

EventHorizan said:

prob something from your high ec problem you had a few days ago.. Didnt you have a situation where we had you drop the ec some? Shitr i get confused sometimes..

Click to expand...

No that wasn't me. Lol
I can't keep track either.
I can barely keep up. :)

Cityfarmin said:

Yea I’m gonna go tomorrow, but since I was at Home Depot getting pvc pipes to build the flood table I figured I see if they had the pump and they didn’t, so I was just keeping updated. I’m gonna go to my hydro guy tomorrow, I know for a fact he has it. I was just shocked that the Home Depot I went to only had ones $99 at the cheapest. But it’s all gravy. I got the a/c unit locked in, got the table built ( I’m just gonna throw some styrofoam on top and cut hole in it where needed and I’ll setup my flood table tomorrow.

I do have a question though.

My flood tables were originally bought so I could catch the run off and it not spill onto the floor of my tent. That in mind they are only 3/4 of a inch high, meaning the walls, will that be high enough to flood and allow the plants to feed and grow?

Should I just fill the table with clay pebbles and space my plants in the clay 12 inches apart or should I try to run them in net pots and/or coco?

I’m prob asking a lot of stupid question but I have only grown in soil for the past 2 grows. So I need all the info I can gather and any help is much appreciated.

Click to expand...

3/4" high? WTF
dude I never heard of such a small tray

maybe you should set up a drip system then