dnewsome2
- 2,020
- 163
Agreed lighting probably the most important thing wouldn't go with junk there.lots of bad info in this thread.mars is complete garbage.spent the extra money on quality led like rootbound said
this will spank it in a 4 x 4 tent
any 315w cmh will also spank it in that size tent ,as logic has already mentioned .and the 315w cmh is def under budget,low heat high quality light.
I don't see how you could go wrong with a Cree cob. I'm just talking about staying away from those cheap Chinese 10-watt LEDI am talking about the cree cob 3590 leds fixture. I ran 3, and 5 watt fixtures before and they produce alot more heat than the cree cob 3590 fixture.
you dont have to build em yourself,timber will build them for you :cool:Cob leds are pretty wicked. I'm just not interested in building that many lights
There is no doubt those cobs are kick ass. I guess I'm just stuck in the old ways and I cannot help but mix them up with cheap old school shit LOL.you dont have to build em yourself,timber will build them for you :cool:
http://timbergrowlights.com/400-watt-vero29-v7-square-framework/
grip it n rip it :fire:
you dont have to build em yourself,timber will build them for you :cool:
http://timbergrowlights.com/400-watt-vero29-v7-square-framework/
grip it n rip it :fire:
There is no doubt those cobs are kick ass. I guess I'm just stuck in the old ways and I cannot help but mix them up with cheap old school shit LOL.
Yea, I'm pricing a 2-COB build right now, rather than get that 2nd .99 Roleando from Amazon.The point I'm poorly trying to make is, you pick the light depending on budget, realistic result goal, space...
I'm guessing (knowing what I know now), I could put together a pretty kick ass 4 X 4 setup for $1000 if I built things myself and shopped around.
you dont have to build em yourself,timber will build them for you :cool:
http://timbergrowlights.com/400-watt-vero29-v7-square-framework/
grip it n rip it :fire:
Yea, I'm pricing a 2-COB build right now, rather than get that 2nd .99 Roleando from Amazon.
So, $40 more, some scrap metal, cord and labor, I get a kickass light vs. mystery components. That 140mm heatsink ( 5.5 inches) has pass thru holes to get the wires back topside, or you can save a few bucks on 120mm without that.
- MEAN WELL HLG-185H-C1400B = $50.00
- BRIDGELUX VERO29 (3000K 90 CRI D) 2@25= $50.00
- 140MM PIN HEATSINK 2@19= $38.00
- SUR-SEAL SUR-COOL THERMAL PAD 2@= $1.60
- $139.60 Total
I know if I don't do this, I'll ragret it later.
how much dust?I have a 315w cmh collecting dust, it ran much hotter than my plc420w cob led that I run now.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?