Budw3is3r
- Posts
- 179
- Reactions
- 394
- Joined
- Apr 6, 2020
- Points
- 63
Absolutely @Aqua Man , without an infrared temperature gauge I'm assuming the leaf temperature to be -2°c against the room temperature.
Yes, running the Migro 600's LED.
Bud
Absolutely @Aqua Man , without an infrared temperature gauge I'm assuming the leaf temperature to be -2°c against the room temperature.I think your under LED??? Your leaf temps are very like about 5F cooler so that chart may not be accurate
Typically 2F would be more in line with a HPS or something with a bit more infrared. 5-8f is more typical for LED. I would hazard a guess pretty dam close to 5F difference.Absolutely @Aqua Man , without an infrared temperature gauge I'm assuming the leaf temperature to be -2°c against the room temperature.
Yes, running the Migro 600's LED.
Bud
Thanks @Madmax trouble is I don't really want to have two rooms on the go and foot the additional expense for the equipment and the headache of electricity, ventilation etc. Although I might have to!When the plants are 2 weeks before going into flower room take cuttings off your own bro is the norm for continuous cycle.you will soon learn what the strain you have growing now likes..
You dont wanna clone in flower IMOThanks @Madmax trouble is I don't really want to have two rooms on the go and foot the additional expense for the equipment and the headache of electricity, ventilation etc. Although I might have to!
Ideally I'd just have an areoponic cloning station like the below (then take the cuttings during flower so that when I havest in the room I replace with these):
Aeroponic Propagation Kits
Aeroponic Propagation Kits Get Explosive Roots in Record Time with Our Aeroponic Propagation Kits These kits will help you to take cuttings from your mother plant and quickly transform them into well rooted clones. Aeroponics is the most advanced methodwww.onestopgrowshop.co.uk
I could be pissing in the wind with this idea, thats why I'm putting out there
Bud
I think you would b pleasantly suprised mate on just how little on the electricity side and expenditure you could get your clones up and running with..they need buggerall light first couple weeks until you use a bigger light...ive been reading reading reading on this site and what old fellas are telling me i cant wait to get a grow going soon.im missing out on all the fun..who says an old dog cant learn new tricksThanks @Madmax trouble is I don't really want to have two rooms on the go and foot the additional expense for the equipment and the headache of electricity, ventilation etc. Although I might have to!
Ideally I'd just have an areoponic cloning station like the below (then take the cuttings during flower so that when I havest in the room I replace with these):
Aeroponic Propagation Kits
Aeroponic Propagation Kits Get Explosive Roots in Record Time with Our Aeroponic Propagation Kits These kits will help you to take cuttings from your mother plant and quickly transform them into well rooted clones. Aeroponics is the most advanced methodwww.onestopgrowshop.co.uk
I could be pissing in the wind with this idea, thats why I'm putting out there
Bud
I'll be researching for a temperature gauge tonight. Might actually work in my favour @Aqua Man .Typically 2F would be more in line with a HPS or something with a bit more infrared. 5-8f is more typical for LED. I would hazard a guess pretty dam close to 5F difference.
AbsolutelyI think you would b pleasantly suprised mate on just how little on the electricity side and expenditure.you could get your clones up and running with..they need buggerall light first couple weeks until you use a bigger light...ive been reading reading reading on this site and what old fellas are telling me i cant wait to get a grow going soon.im missing out on all the fun..who says an old dog cant learn new tricks
If I made a clone area / small room...You dont wanna clone in flower IMO
Not 8 weeks.If I made a clone area / small room...
Specifically just for clones taken from the veg stage to be taken from.. to grow up until they get put into the areoponic system and start proper veg... how long do you think I can hold them in that state? It would need to be at least 8 weeks for the flower room to be empty?
Or... I just have a mother plant in a tent (small tent setup) and take clones whenever I see fit and not worry about holding clones until I have an empty room?
Bud
I think you are right.Not 8 weeks.
Get a small light soil and if it get to big just take a couple clones and pitch it. Do this as many times as needed if your tight on space.
The need fresh air but under low light the demand is lower because less transpirationI think you are right.
Would I still need an exhaust fan?
Bud
Ph and how much is it changing in a day?Strange one today, still training the girls and noticed that the leaves look like they have been hit with some heat stress and slight discolouration?
Bud
This was just taken, going to adjust to get it sitting between 5.5 and 6.5.Ph and how much is it changing in a day?
I'll have another gander on the Ph later on.@Aqua Man Hey bro...any truth in when you use ph up or down is it advisable to wait say 10 -20 mis to stabilize for a more a correct reading,,also.does using too much up down affect the amount of nutrients your giving to the plants to keep to the required ec ...hope that made sence lol..
Yeah adding up and down can throw nutrient ratios out. Its advisable to only add whats needed. Typically UP will add potassium and DOWN will add Phosphorus or sulfur depending on source.@Aqua Man Hey bro...any truth in when you use ph up or down is it advisable to wait say 10 -20 mis to stabilize for a more a correct reading,,also.does using too much up down affect the amount of nutrients your giving to the plants to keep to the required ec ...hope that made sence lol..
Ph moved slightly.Yeah adding up and down can throw nutrient ratios out. Its advisable to only add whats needed. Typically UP will add potassium and DOWN will add Phosphorus or sulfur depending on source.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?