Log In Register

3 Strains in DWC with 5 weeks remaining

2 Purple Urkles 3 Chemdog Gorrilas 1 Gorilla OG ~5 Weeks left... have to put them under a SK400, but, can't raise it, so, a screen is used to bring down the brightness just enough so it doesn't 'burn' the ones directly below. I've added a net for a few...
Home Forums Medical Cannabis Cultivation Grow Diaries 3 Strains in DWC with 5 weeks remaining
Grow diary eligible · Medical Cannabis Cultivation

3 Strains in DWC with 5 weeks remaining

by Shlep · Started
1d
Running
0
Updates
27
Replies
2
Images
Discussion below · 27 replies
Page 1 of 2 · Replies 1–20 of 28
Shlep

Shlep

Posts
71
Reactions
75
Joined
Apr 14, 2021
Points
18
2 Purple Urkles
3 Chemdog Gorrilas
1 Gorilla OG

~5 Weeks left... have to put them under a SK400, but, can't raise it, so, a screen is used to bring down the brightness just enough so it doesn't 'burn' the ones directly below. I've added a net for a few reasons, one is to use as a 'scrog' if necessary.
Foxfarm Nutes
DWC
Sk400
40" x 48" room
IMG_20210609_103901.jpg


IMG_20210609_104254.jpg
 
Had to bend, prune, supercrop and more to all of the plants because they were growing into the shadows. Most of the lower leaves are still producing so I won't trim them off until about 2 weeks left, which is in about 2 weeks. Will update pics tomorrow... have the wrong phone with me... lol.
Wednesday is picture day every week.
 
Just hoping to keep them going... ;) Again, the hotspot is not there usually. I place a screen there and it does lower the intensity. None of the leaves are bleaching, so....
 

Attachments

  • IMG_20210616_084226.jpg
    IMG_20210616_084226.jpg
    509.1 KB · Views: 116
  • IMG_20210616_084429.jpg
    IMG_20210616_084429.jpg
    638.4 KB · Views: 117
  • IMG_20210616_084439.jpg
    IMG_20210616_084439.jpg
    441.4 KB · Views: 116
  • IMG_20210616_084448.jpg
    IMG_20210616_084448.jpg
    435 KB · Views: 108
  • IMG_20210616_084500.jpg
    IMG_20210616_084500.jpg
    456.6 KB · Views: 111
  • IMG_20210616_084520.jpg
    IMG_20210616_084520.jpg
    665.4 KB · Views: 109
On the second pic (above), you'll have to imagine adding a 22 degree tilt to the light pushing it back to the wall behind. Then I added another 100 W LED to fill in the 20% that wasn't getting enough light to the front set. It fills in nicely. It's a Mother's Little Helper from Spectrum King. I bought a few of these and we really liked them. The one I put in here I was using for a workbench light. ;)
 
This is what I'm working with, but, it is what it is. Down near the root level it's about 87 degrees. This is usually hanging on the light, and this is the temp there.

Had to add another light so none would be in the shadows. I just started training too late.


IMG 20210617 161522
 

Attachments

  • IMG_20210617_161528.jpg
    IMG_20210617_161528.jpg
    472.6 KB · Views: 86
But what are the leaf temps?
I don't know. I can't really measure them. Mid canopy is around 88 degrees from a temp gauge on the wall. There's no real bleaching as far as I can tell, but, I moved them as far away as I could and now there's really nowhere left to go. ;)
 
I don't know. I can't really measure them. Mid canopy is around 88 degrees from a temp gauge on the wall. There's no real bleaching as far as I can tell, but, I moved them as far away as I could and now there's really nowhere left to go. ;)
Cheap IR temp gun brother. 77f is ideal for leaf temps or there abouts. A slightly lower humidity and decent airflow will help lower them through evaporative cooling. Under LED its not a stretch to see leaf temps 10f cooler than air temps.

Just dont go wind burning them.
https://www.amazon.com/dp/B07GB7CDXS/ref=cm_sw_r_cp_awdb_imm_ANC9RTP4TA6JQA9VGHJE
 
Cheap IR temp gun brother. 77f is ideal for leaf temps or there abouts. A slightly lower humidity and decent airflow will help lower them through evaporative cooling. Under LED its not a stretch to see leaf temps 10f cooler than air temps.

Just dont go wind burning them.
Cool... thanks. I do have two circulating fans... one on the ceiling and one in the corner you can't see... a tower fan. Yes, I've been thinking about a temp gun, but, with my pay reduced this past year, ONLY the most important things can be bought. ;)

I have an exhaust fan above the light operating on about 250 cfm which takes out the entire room in a minute.
https://www.amazon.com/dp/B07GB7CDXS/ref=cm_sw_r_cp_awdb_imm_ANC9RTP4TA6JQA9VGHJE
 
Keep doing what you're doing. Those ladies look really good!
Thanks... Unfortunately, upon checking the ppm today, it was at 2700. It needed 1 1/2 gallons in the res (4 gallon res) so I just added water and got it back down to under 1800. It's been hot so they are drinking more water than nutes, I think. I also added a bit of Epsom Salt and didn't add water a day or two ago, which may have also added to the issue. Most others are around 1600 - 1800 ppm at the moment.
 
So, the leaf temp is around 88F, but, I don't find that too strange. Last night I checked my grass, after 8 pm and it was 82F. The peach and apple trees were around 88F. My FN house, thank you for causing temps to rise, was 115F radiating AFTER the sun was down. Unreal.

Anyway, these were growing into the light, and she is about 10 days slower than the others, so, she had to be 'scropped'.
 

Attachments

  • 1624286077370.jpg
    1624286077370.jpg
    446.4 KB · Views: 82
  • 1624286077380.jpg
    1624286077380.jpg
    362.4 KB · Views: 81
  • 1624286077384.jpg
    1624286077384.jpg
    578.4 KB · Views: 78
  • 1624286077389.jpg
    1624286077389.jpg
    428.1 KB · Views: 77
  • 1624286077393.jpg
    1624286077393.jpg
    553.2 KB · Views: 72
  • 1624286077398.jpg
    1624286077398.jpg
    533.9 KB · Views: 96
She was getting a little pale so, I had to cut my equiv 1000HPS down to around a 400HPS, but, no problems. They will be fine.
You can see the cropping areas start to revive. I trimmed some out. I will start feeding water to the res today, but, that's just to top it off.
PPM is still around 1700 for the moment, but, that will begin to come down.

A nice pic from within looking up. ;)

Yes, there are a few seeds. She had a few nanners but I got most of them, but, apparently, she won the battle on a few buds. No problem.
 

Attachments

  • IMG_20210623_093945.jpg
    IMG_20210623_093945.jpg
    400.1 KB · Views: 72
  • IMG_20210623_093954.jpg
    IMG_20210623_093954.jpg
    676.9 KB · Views: 69
  • IMG_20210623_094007.jpg
    IMG_20210623_094007.jpg
    461.7 KB · Views: 78
  • IMG_20210623_094014.jpg
    IMG_20210623_094014.jpg
    530.5 KB · Views: 73
  • IMG_20210623_094041.jpg
    IMG_20210623_094041.jpg
    625 KB · Views: 71
  • IMG_20210623_094045.jpg
    IMG_20210623_094045.jpg
    580.8 KB · Views: 68
  • IMG_20210623_094052.jpg
    IMG_20210623_094052.jpg
    640.9 KB · Views: 74
  • IMG_20210623_094355.jpg
    IMG_20210623_094355.jpg
    486.3 KB · Views: 76
  • IMG_20210621_120904.jpg
    IMG_20210621_120904.jpg
    288.4 KB · Views: 72
She was getting a little pale so, I had to cut my equiv 1000HPS down to around a 400HPS, but, no problems. They will be fine.
You can see the cropping areas start to revive. I trimmed some out. I will start feeding water to the res today, but, that's just to top it off.
PPM is still around 1700 for the moment, but, that will begin to come down.

A nice pic from within looking up. ;)

Yes, there are a few seeds. She had a few nanners but I got most of them, but, apparently, she won the battle on a few buds. No problem.
Actually, I lost the battle for most of this plants buds. They are getting heavily seeded, but, I can throw the seeds into a blender and make a protein shake. ;) Also, I haven't had seeded bud in a while... used to get some 'mexican' bricks long ago and sometimes it would be the only shite that would put me to sleep. Maybe I can reproduce that. lol.

The bud could have been CBD, Hemp, or MJ, but, when you're a teenager, you might not care so much.... at least in the 80s.
 
Actually, I lost the battle for most of this plants buds. They are getting heavily seeded, but, I can throw the seeds into a blender and make a protein shake. ;) Also, I haven't had seeded bud in a while...
I was going to say! that first picture of that bud looks like a ton of seed! Did you find the culprit?
 
Page 1 of 2 · Replies 1–20 of 28
Back
Top Bottom