G
gudkarma
Guest
been here a minute & figured it's time to flesh out the digs before busting out another journal.
my lab, the place where it all goes down, is in a detached garage.
as soon as i score a shed, i'll still have enough space to work on my cars... all the while keeping my two favorite things in the same space (fast cars & dank weed).
the lab is basically a large flower room with a veg cabinet inside.
in the winter the garage is butt fu*k cold, in the summer hot as all hades.
for enviro controls i use : oil filled radiator, portable air con, & a de-huey
10' x 7.5' x 8' main lab
3' x 3' x 6' secondary unit for small projects (seasonal)
3' x 2' x 5' tent for my two prized mother plants (24/7)
basics : 3x2 frame work, built modular, with osb on the outside.
osb outside > 6 mil plastic > framing > r15 > 6 mil panda inside
roof is fabricated with 1x3 latticed into an existing shelf system built in the 1950's... i used brackets found in the hardware store for extra support.
i have 2" tuff foam, foil side down, for the roof. next season, i'll drop 3" of fiberglass roll up top for extra toastyness.
room is built in a sealed style but uses intake & exhaust to get the job done. instead of two vents there are 3 ...an extra vent cut out to run closed loop, i keep it sealed right now.
fans are 400, 195, & 165 cfm ALL on router speed controls w/ brand new 18" carbon filter recently installed.
the project cabinet & veg cabinet (inisde the lab) have proper intake/exhaust venting using 80 cfm can fans.
lighting for flower :
(1) 600w digital HPS on a light mover
(1) 400w digital HPS cool tubes
(1) 250w MH internal ballast, old school
clone cabinet : t12 & t8 & various cfls on clamp lamps
mom tent : 250w MH
project cabinet : 150w HPS & clamp lamps if necessary
strains : a very special landrace afghan kush , sour d (clone only) , great white shark (shanti), advanced seeds kaya47, & sannie's jackberry
tables : 2 @ 3x2 (6x2) & 1 @ 4x2 : right now, i got the 4x2 broken down & some old moms in flower
rezzys : 3 @ 27 gall tuff boxes
pumps : 350 gph for the 3x2s & 400 gph for the 4x2
air pump : pro model, piston type, 6 on the manifold
my lab, the place where it all goes down, is in a detached garage.
as soon as i score a shed, i'll still have enough space to work on my cars... all the while keeping my two favorite things in the same space (fast cars & dank weed).
the lab is basically a large flower room with a veg cabinet inside.
in the winter the garage is butt fu*k cold, in the summer hot as all hades.
for enviro controls i use : oil filled radiator, portable air con, & a de-huey
10' x 7.5' x 8' main lab
3' x 3' x 6' secondary unit for small projects (seasonal)
3' x 2' x 5' tent for my two prized mother plants (24/7)
basics : 3x2 frame work, built modular, with osb on the outside.
osb outside > 6 mil plastic > framing > r15 > 6 mil panda inside
roof is fabricated with 1x3 latticed into an existing shelf system built in the 1950's... i used brackets found in the hardware store for extra support.
i have 2" tuff foam, foil side down, for the roof. next season, i'll drop 3" of fiberglass roll up top for extra toastyness.
room is built in a sealed style but uses intake & exhaust to get the job done. instead of two vents there are 3 ...an extra vent cut out to run closed loop, i keep it sealed right now.
fans are 400, 195, & 165 cfm ALL on router speed controls w/ brand new 18" carbon filter recently installed.
the project cabinet & veg cabinet (inisde the lab) have proper intake/exhaust venting using 80 cfm can fans.
lighting for flower :
(1) 600w digital HPS on a light mover
(1) 400w digital HPS cool tubes
(1) 250w MH internal ballast, old school
clone cabinet : t12 & t8 & various cfls on clamp lamps
mom tent : 250w MH
project cabinet : 150w HPS & clamp lamps if necessary
strains : a very special landrace afghan kush , sour d (clone only) , great white shark (shanti), advanced seeds kaya47, & sannie's jackberry
tables : 2 @ 3x2 (6x2) & 1 @ 4x2 : right now, i got the 4x2 broken down & some old moms in flower
rezzys : 3 @ 27 gall tuff boxes
pumps : 350 gph for the 3x2s & 400 gph for the 4x2
air pump : pro model, piston type, 6 on the manifold