CBDfutute4
- Posts
- 591
- Reactions
- 402
- Joined
- Jul 6, 2017
- Points
- 63
Hello guys
for the life of me I can’t get my system back to running normally, I get about 20% water flow no matter what pump I plug in. This setup is 8 months old with 3 runs under the belt
I have a 4x8 with a row of 3 buckets with 2” pvc/bulkheads, 3/4” return line. 700gph danner pump
My system pulls from the buckets through the 3/4 return in the pump and dumps into res or chiller on a steep vertical bend about 18 inches up
I have had this happen to me once before that I figured out myself using a backup pump.
I only build 60/70% of my whole setup, i have buddies to help me with tough stuff.
I cannot get a normal flow, i prime with lots of water. I bought a new pump thinking it could be the pump, my backup is 300gph so thought it was under powered, etc
ive fuk around n smoke too much n driving me nuts, plz help
for the life of me I can’t get my system back to running normally, I get about 20% water flow no matter what pump I plug in. This setup is 8 months old with 3 runs under the belt
I have a 4x8 with a row of 3 buckets with 2” pvc/bulkheads, 3/4” return line. 700gph danner pump
My system pulls from the buckets through the 3/4 return in the pump and dumps into res or chiller on a steep vertical bend about 18 inches up
I have had this happen to me once before that I figured out myself using a backup pump.
I only build 60/70% of my whole setup, i have buddies to help me with tough stuff.
I cannot get a normal flow, i prime with lots of water. I bought a new pump thinking it could be the pump, my backup is 300gph so thought it was under powered, etc
ive fuk around n smoke too much n driving me nuts, plz help