That will fix it.I may do exactly that
thanks for ur help
"will having higher water level help me get it figured out?"I believe I have something like that
it’s been killing me trying to get it, I’ve ran it in reverse, drain n filled with other pumps
will having higher water level help me get it figured out?
This has ran for 8 months
"will having higher water level help me get it figured out?"
Yes. Half full will usually get it going
Ps: my stock current culture 4 site 13 gal modules uses a danner 500 gph pump
Do I run a submerged pump or online ?"will having higher water level help me get it figured out?"
Yes. Half full will usually get it going
Ps: my stock current culture 4 site 13 gal modules uses a danner 500 gph pump
InlineDo I run a submerged pump or online ?
Do I run a submerged pump or online ?
Remove your 2 inch infeed pvc and bulkhead from tote 1, and seal the hole. Insert your 3/4 inch hose directly into the side or top of the tote. Do not increase it from 3/4inch to 2 inch. Your pump cannot fill a 2 inch line sufficiently.
Use gravity to get the water back to the res, not the pump.
Oh yea, I use 1/2. All you need is a slight current. Sounds like you gotta easy way to fix it.for me to do this I just need to turn around my pump, buy longer 3/4” hose and slightly change the lines how water goes in/out of the chiller
do u believe the 3/4 feed will work, cuz if I proceed with this my 2” pvc will be my return to res.
than pull from res into chiller n out n back to pump
Thank u for your continued help sirRemove your 2 inch infeed pvc and bulkhead from tote 1, and seal the hole. Insert your 3/4 inch hose directly into the side or top of the tote. Do not increase it from 3/4inch to 2 inch. Your pump cannot fill a 2 inch line sufficiently.
Use gravity to get the water back to the res, not the pump.
Submerged pump. Turn it around so you are running forwards. Whatever that means.
I try where I can to help. I'm glad you are getting it sorted. But I still think the pump is supposed to be underwater. Every pump like this I've ever used (fish tanks and sumps) is designed to be underwater for cooling and lubrication.thank u too brother
u have put ur .02 in several times, I appreciate it
Yeah, like @Dirtbag said, its made leaky on purpose. Sink that buggah.Ok
I’m going to chop things up and reroute to allow for it to be submerged
my pump needs 11.66 gal per minute and u can hear it becoming unprimed when u start it now matter how much water/time u put into priming it
even my wife wants this working so I stop dabbing n drinking n fuking around with all this
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?