Clm307
- 143
- 43
Are the roots like this cause my waters to low or something?Follow vpd in humidy , look at first picture , it shows you have low humidity
Purple stems , how much co2 you running and what temps ? Get your temps at 78-80f and follow vpd chart .If you can get a min 900ppm—1500ppm and raise your start of 50ppm-100ppm Then wait a few days so the plants get used to it and you save cash
purple stems were showing = they didn’t like your environment choices , so even if you have a meter , are you checking the min/max daily and have at least 1 on the wall and then 1 for the canopy ?
I even suggest a thermometer so you can test your room to see if it’s “ truely “ as cool everywhere and you might figure out you got some major issues or the room wasn’t as sealed you thought . Great tool and it’s like 20 bucks on amazon
major improvement ! pulse environment controller meter , this has saved Me this round, previous rounds I could everything perfect but if the a/c shuts offs or I have any issues in any way I’m environment, you’ll know and it’s logged . You could be anywhere in the world and that’s the cool thing about it Instesd of of so many companies where they want you to have “ apps “ , pulse you just login on their encrypted sever and see it
Pulse Grow - Pulse One Grow Room Monitor - Track VPD, Temperature, Rh
Pulse Labs provides smart and easy grow room monitoring solutions.getpulse.co
So far so good on the lst. If you are going to try and bush them out I would suggest making some holes in the lids and using a soft twine to tie down the branches, they are going to need something strong to hold them back when they get bigger. If thats painters tape holding the leaves down in one of the pics, I wouldn't recommend that.Another pic
Haha yes it is saw some dude in a video do it ..thanks for the suggestions I will switch those over to twine tonight... I have been using low gauge electrical wire will that be ok?So far so good on the lst. If you are going to try and bush them out I would suggest making some holes in the lids and using a soft twine to tie down the branches, they are going to need something strong to hold them back when they get bigger. If thats painters tape holding the leaves down in one of the pics, I wouldn't recommend that.
I don’t know they just look so small Maybe iM trippinWhy they look good and roots look great.
If you did find a way to make it hold back a strong branch it would probably start to cut into it, that's why I recommend twine, its thicker and the fibers are more gentle on the plant.I have been using low gauge electrical wire will that be ok?
Roots look great, you are trippinI don’t know they just look so small Maybe iM trippin
Haha aright cool ... you think it’ll cut through even though the wire has plastic coating?If you did find a way to make it hold back a strong branch it would probably start to cut into it, that's why I recommend twine, its thicker and the fibers are more gentle on the plant.
Roots look great, you are trippin
Yes. Its not going to completely chop off a branch or anything but it will start to dig in and leave an open wound that can't heal because it just gets worse as the plant grows. Again, this is only if you are trying to bush out a large plant, they are still pretty small at the moment and if you switched to flower now they will probably never get branches that are thick and strong enough to push back that hard against the wire.Haha aright cool ... you think it’ll cut through even though the wire has plastic coating?
Yes. Its not going to completely chop off a branch or anything but it will start to dig in and leave an open wound that can't heal because it just gets worse as the plant grows. Again, this is only if you are trying to bush out a large plant, they are still pretty small at the moment and if you switched to flower now they will probably never get branches that are thick and strong enough to push back that hard against the wire.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?