Any suggestions ??

[Clm307]

Sup guys this is my first grow and I’m giving a little LST a try and seeing if anyone one has any suggestions for me on how to improve on what i have done so far ??

 

[Clm307]

Another pic

 

[Burned Haze]

Follow vpd in humidy , look at first picture , it shows you have low humidity

Purple stems , how much co2 you running and what temps ? Get your temps at 78-80f and follow vpd chart .If you can get a min 900ppm—1500ppm and raise your start of 50ppm-100ppm Then wait a few days so the plants get used to it and you save cash

purple stems were showing = they didn’t like your environment choices , so even if you have a meter , are you checking the min/max daily and have at least 1 on the wall and then 1 for the canopy ?

I even suggest a thermometer so you can test your room to see if it’s “ truely “ as cool everywhere and you might figure out you got some major issues or the room wasn’t as sealed you thought . Great tool and it’s like 20 bucks on amazon

major improvement ! pulse environment controller meter , this has saved Me this round, previous rounds I could everything perfect but if the a/c shuts offs or I have any issues in any way I’m environment, you’ll know and it’s logged . You could be anywhere in the world and that’s the cool thing about it Instesd of of so many companies where they want you to have “ apps “ , pulse you just login on their encrypted sever and see it

Pulse Grow - Pulse One Grow Room Monitor - Track VPD, Temperature, Rh

Pulse Labs provides smart and easy grow room monitoring solutions.

getpulse.co

 

[Clm307]

Hell ya great info I am gonna order that... the humidity is usually at 60- 65 I had the tent open for while trying to train these girls that’s why it is down so low...temps get down to about 65 at night u think I should add a little heater at night? Temps during the day are 75-79

 

[Clm307]

And I am not running any co2

 

[Clm307]

Follow vpd in humidy , look at first picture , it shows you have low humidity

Purple stems , how much co2 you running and what temps ? Get your temps at 78-80f and follow vpd chart .If you can get a min 900ppm—1500ppm and raise your start of 50ppm-100ppm Then wait a few days so the plants get used to it and you save cash

purple stems were showing = they didn’t like your environment choices , so even if you have a meter , are you checking the min/max daily and have at least 1 on the wall and then 1 for the canopy ?

I even suggest a thermometer so you can test your room to see if it’s “ truely “ as cool everywhere and you might figure out you got some major issues or the room wasn’t as sealed you thought . Great tool and it’s like 20 bucks on amazon

major improvement ! pulse environment controller meter , this has saved Me this round, previous rounds I could everything perfect but if the a/c shuts offs or I have any issues in any way I’m environment, you’ll know and it’s logged . You could be anywhere in the world and that’s the cool thing about it Instesd of of so many companies where they want you to have “ apps “ , pulse you just login on their encrypted sever and see it

Pulse Grow - Pulse One Grow Room Monitor - Track VPD, Temperature, Rh

Pulse Labs provides smart and easy grow room monitoring solutions.

getpulse.co

Are the roots like this cause my waters to low or something?

 

[Clm307]

Sorry I forgot the pic

 

[Clm307]

Maybe I should just send these to flower and start over???

 

[Aqua Man]

Why they look good and roots look great.

 

[FourthCity]

Another pic

So far so good on the lst. If you are going to try and bush them out I would suggest making some holes in the lids and using a soft twine to tie down the branches, they are going to need something strong to hold them back when they get bigger. If thats painters tape holding the leaves down in one of the pics, I wouldn't recommend that.

 

[Clm307]

So far so good on the lst. If you are going to try and bush them out I would suggest making some holes in the lids and using a soft twine to tie down the branches, they are going to need something strong to hold them back when they get bigger. If thats painters tape holding the leaves down in one of the pics, I wouldn't recommend that.

Haha yes it is saw some dude in a video do it ..thanks for the suggestions I will switch those over to twine tonight... I have been using low gauge electrical wire will that be ok?

 

[Clm307]

Or i guess high gauge

 

[Clm307]

Why they look good and roots look great.

I don’t know they just look so small Maybe iM trippin

 

[FourthCity]

I have been using low gauge electrical wire will that be ok?

If you did find a way to make it hold back a strong branch it would probably start to cut into it, that's why I recommend twine, its thicker and the fibers are more gentle on the plant.

I don’t know they just look so small Maybe iM trippin

Roots look great, you are trippin

 

[Clm307]

If you did find a way to make it hold back a strong branch it would probably start to cut into it, that's why I recommend twine, its thicker and the fibers are more gentle on the plant.


Roots look great, you are trippin

Haha aright cool ... you think it’ll cut through even though the wire has plastic coating?

 

[FourthCity]

Haha aright cool ... you think it’ll cut through even though the wire has plastic coating?

Yes. Its not going to completely chop off a branch or anything but it will start to dig in and leave an open wound that can't heal because it just gets worse as the plant grows. Again, this is only if you are trying to bush out a large plant, they are still pretty small at the moment and if you switched to flower now they will probably never get branches that are thick and strong enough to push back that hard against the wire.

 

[Clm307]

Yes. Its not going to completely chop off a branch or anything but it will start to dig in and leave an open wound that can't heal because it just gets worse as the plant grows. Again, this is only if you are trying to bush out a large plant, they are still pretty small at the moment and if you switched to flower now they will probably never get branches that are thick and strong enough to push back that hard against the wire.

 

[Clm307]

Ok thanks I’ll probably use something different just in case

 

[Clm307]

Just a little update on how these little biotches are doing still taking any and all suggestions

 

[Custom99]

I like this product. Its great for tying plants. We use it for our houseplants and it has worked great on my LST.