Shatterstar
- Posts
- 9
- Reactions
- 6
- Joined
- Sep 3, 2016
- Points
- 3
Getting into Aeroponics for my grow setup, just figuring out all the pieces I need, and finally came up with a plan. If anyone can lend some insight I would greatly appreciate it. So far I believe the setup goes as follows;
Reservoir > Inline Filter > Pump > Pressure Switch (necessary if controlled by solenoid?) > Pressure Gauge > 100 PSI Pressure Relief Valve > Accumulator Tank > Solenoid > Mister Head
I believe this is the correct flow on the connections, am I missing anything? Also the pressure switch is it necessary with the 8800 Aquatec pump if there are solenoids at each mister? Is it necessary to put a solenoid at each mister or can there be just one after the accumulator tank?
Anyone have detailed pictures of their setup showing how to do the connections? Thanks in advance!
Reservoir > Inline Filter > Pump > Pressure Switch (necessary if controlled by solenoid?) > Pressure Gauge > 100 PSI Pressure Relief Valve > Accumulator Tank > Solenoid > Mister Head
I believe this is the correct flow on the connections, am I missing anything? Also the pressure switch is it necessary with the 8800 Aquatec pump if there are solenoids at each mister? Is it necessary to put a solenoid at each mister or can there be just one after the accumulator tank?
Anyone have detailed pictures of their setup showing how to do the connections? Thanks in advance!