Aquaman goes COCO. (Mother hunt)

Aqua Man · Oct 2, 2020

OK this will be another cluster fuck mother hunt but done in coco with auto feed. Over the next week I will be putting things together starting Sunday and buying the remaining items for the auto feed and auto drain system.

Will be using corrugated roofing panels, a gutter and a 2x3 frame with a condensate pump for a furnace to dispose of the runoff right down the drain.

Same sealed room same light for this grow and prob the last grow under it.

Strains will be Greenpoint Cake N Chem and Dragonflames blueberry dragon cheese. Will be popping these likely tomorrow or Sunday

Will get some pics up Sunday after there is something to show.

bigbagofbuds · Oct 2, 2020

I look forward to seeing what you find in the Greenpoint Cake N Chem!

cemchris · Oct 2, 2020

vroom vroom

Dirtbag · Oct 2, 2020

Nice, tuned in! Fwiw, personally if i were to do it over again, Id run my mother hunt in bigger pots or even in something with a bit more cec like proterra.
Im getting a fair bit of variation from seed that doesnt lend itself well to automated feeds in small pots, to say the least. Im only running clones with known structure and feeding habbits in this automated setup from here out.

That said, im really excited to see what you can do with this shit mang.

MIMedGrower · Oct 2, 2020

Im watching too. :-)

Pondracer · Oct 2, 2020

Perfect. This is exactly where I am now. Setting up autofeed and drain for the next run. I will be very curious to see what you do.

BurnzYzBudZz · Oct 3, 2020

In for this one. Happy grows.

Flexnerb · Oct 3, 2020

I have GP blizzard bush..lol...got them for pretty damn cheap too...im tuned in!

Aqua Man · Oct 4, 2020

Ok so Sunday as promised pics. Well life fucked with everything so this is as far as i made it today. 2x3s for the frame cut. Corrugated roof panels cut. Condensate pump taken out of the box lol... yup thats it. Beans will see water as soon as the table is done and I just need to plumb the autofeed. Until then here is some pretty pics to look at lol.

Anthem · Oct 4, 2020

looking forward to this one Aqua Man!!!!

Anthem · Oct 4, 2020

I just cut down my last plants in Coco Aqua Man. Just as I think I figured out what was causing me so much trouble. With PPFD's up around 1700 the plants want so much mag and calcium I was really using a lot of cal mag. Well last week at the hydro store I found no "N" Cal Mag. Grow More makes the stuff.

Aqua Man · Oct 4, 2020

Anthem said:
I just cut down my last plants in Coco Aqua Man. Just as I think I figured out what was causing me so much trouble. With PPFD's up around 1700 the plants want so much mag and calcium I was really using a lot of cal mag. Well last week at the hydro store I found no "N" Cal Mag. Grow More makes the stuff.

I'm going to guess calcium carbonate? Mag sulfate?

Can you let me know the brand?

I'm kinda thinking it would need dosed a but higher than the cal and mag nitrate just because of the lower saturation point.

Anthem · Oct 4, 2020

Aqua Man said:
I'm going to guess calcium carbonate? Mag sulfate?

Can you let me know the brand?

I'm kinda thinking it would need dosed a but higher than the cal and mag nitrate just because of the lower saturation point.

AquaMan that is the label. Brand is Grow More.

B0ssD0ss · Oct 4, 2020

Following

Milson · Oct 4, 2020

Interested to see how you push coco.

Dirtbag · Oct 4, 2020

Anthem said:
View attachment 1039608 View attachment 1039608
AquaMan that is the label. Brand is Grow More.

Thats good shit right there!

Dirtbag · Oct 4, 2020

Aqua Man said:
Ok so Sunday as promised pics. Well life fucked with everything so this is as far as i made it today. 2x3s for the frame cut. Corrugated roof panels cut. Condensate pump taken out of the box lol... yup thats it. Beans will see water as soon as the table is done and I just need to plumb the autofeed. Until then here is some pretty pics to look at lol.

Lol are those 3x6'? That looks like the exact same roof panels i use. Awesome stuff, score it down the groove and bend to snap it into sections, or leave as is... And cheap.

Aqua Man · Oct 4, 2020

Dirtbag said:
Lol are those 3x6'? That looks like the exact same roof panels i use. Awesome stuff, score it down the groove and bend to snap it into sections, or leave as is... And cheap.

Cut to 5.5ft long. Cut it with a skill saw, let's just say there is a better way lol. Still good though. They were 2x8

mikeross · Oct 5, 2020

Aqua Man said:
Cut to 5.5ft long. Cut it with a skill saw, let's just say there is a better way lol. Still good though. They were 2x8

I'm going be using these corrugated panels in an upcoming build. So skill saw isn't the best option to cut these to size? Should I be scoring and snapping off, same way you would cut drywall?

Looking forward to updates!

Dirtbag · Oct 5, 2020

mikeross said:
I'm going be using these corrugated panels in an upcoming build. So skill saw isn't the best option to cut these to size? Should I be scoring and snapping off, same way you would cut drywall?

Looking forward to updates!

I use tin snips or even bonsai shears to cut across the waves, any strong sharp scissor will cut the thin plastic. Honestly you could just use regular scissors if you have strong hands lol. And i score it with a knife and snap it by bending it to trim along the ridges.

Aquaman goes COCO. (Mother hunt)

Aquaman goes COCO. (Mother hunt)

Aqua Man

bigbagofbuds

cemchris

Dirtbag

MIMedGrower

Pondracer

BurnzYzBudZz

HOWCan.i.helPYOU?

Flexnerb

Aqua Man

Attachments

Anthem

Anthem

Aqua Man

Anthem

B0ssD0ss

Milson

Milsonian

Dirtbag

Dirtbag

Aqua Man

mikeross

Dirtbag

Aquaman goes COCO. (Mother hunt)

Aquaman goes COCO. (Mother hunt)

Aqua Man

bigbagofbuds

cemchris

Dirtbag

MIMedGrower

Pondracer

BurnzYzBudZz

HOWCan.i.helPYOU?

Flexnerb

Aqua Man

Attachments

Anthem

Anthem

Aqua Man

Anthem

B0ssD0ss

Milson

Milsonian

Dirtbag

Dirtbag

Aqua Man

mikeross

Dirtbag

Privacy & Transparency

Privacy & Transparency