Athena pro range issues calmag?

[newagefarmer]

Hi guys

Recently switched to athena pro range
Having some issues

Day 30 of flower in 2gal pots

Growing under LEDs
Temp 79f humidity 55%

Currently feeding
Ec 3.0
Ph 5.9

3 times a day for 5 mins each feeding (each 5 min feeding is around 350ml)

below are some of the leaves

 

[JDerek]

Hi guys

Recently switched to athena pro range
Having some issues

Day 30 of flower in 2gal pots

Growing under LEDs
Temp 79f humidity 55%

Currently feeding
Ec 3.0
Ph 5.9

3 times a day for 5 mins each feeding (each 5 min feeding is around 350ml)

below are some of the leaves
View attachment 1178079View attachment 1178078

View attachment 1178076

What did you come up with? Running the A Pro at 2.2ec here and having same issues.

 

[Rainmaker994]

Here’s a message from an Athena Rep when I asked about an issue we were having.
We pre soak the coco in the pot with 4.0 Ec before transplanting clones into it. Then from that day forward, water in 3.0 Ec. This starts the clone off on the right foot with a properly stacked medium. From there you develop an irrigation schedule to water in the 3.0 Ec and you want the runoff ec to slowly but gradually climb by dialing in the irrigation. If runoff ec is not climbing , this means you are watering too frequent. So you would back off on the irrigation schedule for longer drying periods in between waterings. If you dry it out too much, the ph in the coco will drop out of range. This is your real danger. Not the high Ec. More frequent waterings is how you combat that. Hope this was helpful. If you still have any questions or just looking for more tips, you can always give us a call 844-333-1818. Tech support team can also answer questions through Instagram DMs.

 

[Rainmaker994]

Di

Hi guys

Recently switched to athena pro range
Having some issues

Day 30 of flower in 2gal pots

Growing under LEDs
Temp 79f humidity 55%

Currently feeding
Ec 3.0
Ph 5.9

3 times a day for 5 mins each feeding (each 5 min feeding is around 350ml)

below are some of the leaves
View attachment 1178079View attachment 1178078

View attachment 1178076

Did you sort out your issues?

 

[boracho]

Here’s a message from an Athena Rep when I asked about an issue we were having.
We pre soak the coco in the pot with 4.0 Ec before transplanting clones into it. Then from that day forward, water in 3.0 Ec. This starts the clone off on the right foot with a properly stacked medium. From there you develop an irrigation schedule to water in the 3.0 Ec and you want the runoff ec to slowly but gradually climb by dialing in the irrigation. If runoff ec is not climbing , this means you are watering too frequent. So you would back off on the irrigation schedule for longer drying periods in between waterings. If you dry it out too much, the ph in the coco will drop out of range. This is your real danger. Not the high Ec. More frequent waterings is how you combat that. Hope this was helpful. If you still have any questions or just looking for more tips, you can always give us a call 844-333-1818. Tech support team can also answer questions through Instagram DMs.

What is the IG handle for support?

 

[Rainmaker994]

What is the IG handle for support?

Athena.ag is their IG. These guys are very committed to helping customers. They will most likely direct you to the rep for your area. Cheers