A
Absurdity
- 20
- 3
All 120 unfortunately.Voltage?
Yeah that's what I was concerned about. Fan will be 161 watts. So definitely under 2 amps. Still really close to max load. Is there a way to replace the fuse to gain more amperage safely?Off the top of my head, your fan should be under 2 amps and 1000 watts of ballast just over 8 each, so my math says you will be pushing that breaker on startup. You will definitely be less than 2 amps away from max which for me is a bit uncomfortable.
Yeah I don't like the idea of fire or death lol; and I definitely don't know what I'm doing with electrical work.You can replace the breaker if you know what your doing, you could easily die or start a fire if you don't, depending on what's already on that circuit upping the breaker size IMO is not wise unless your flower room is the only thing on the circuit. Meaning no other outlets etc. You do not want a 30 amp breaker on 14 gauge wire, you will certainly run into problems. My advice would be two run each light on a separate 15 or 20 amp circuit just to be safe. Hard to know what is best. If your room is next to the panel you would have more options.
U only need one that will hold the amps of your fans wih a power strip. Amps of your fans should be minuscule to the 20 amp circut.Thanks for the responses, much appreciated. I'll be using a 8x4 tent so I'm thinking of just running 2 600s, maybe 3 but I really just want the 1ks. May need to run with the extension cord idea. It's at a buddy's house so I don't want to run a bunch of cords around his place
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?