[Phreakshow]

In what order do they stack? Smallest number on the bottom? Wouldn't everything just fall through the mesh?

 

[amneziaHaze]

Look at it from a logical point.you want to mix inaide the biggest holes soo it can drop in smaller and smaller.

Whats the point of bigger holes if nothing can pass the smallest hole

 

[Oldchucky]

And depends on Whether the number is mesh or microns!

 

[Phreakshow]

Look at it from a logical point.you want to mix inaide the biggest holes soo it can drop in smaller and smaller.

Whats the point of bigger holes if nothing can pass the smallest hole

So what mesh goes into the bucket first? 25u. Or the 220
The 220 sounds like it should be first in the bucket with 25 on top. I see pictures opposite of this and it makes me confused.
I was looking at a picture of stacking. They have 220 microns on the bottom. Then a 75, 160,120 25 being the last bag in the bucket ( on top).
Next pic I see is 160,25,120,220,73. Then 220 in first going down in numbers to 25. This is what confuses me.

 

[Oldchucky]

The 25 and then successively larger numbers, get stacked on top of it! And they should go up in succession! Like 12345. Not 12435.

 

[Oldchucky]

I don’t know a lot about bubble bags, but I have screens For dry sifting! And mine are labeled in mesh or lines per inch! I think that might be the American way as opposed to the metric way! So the finest screen will have the highest mesh or lines per inch! In microns, a 25 µm bag will filter out particles 25 µm and larger. I 75 µm bag will filter out 75 µm and larger! The smaller the number in microns The Smaller the the openings! You want to filter through the largest openings down through the smallest openings! Probably just confused even more! L O L, but they should always be in order! Not jumping back-and-forth! And if your bags are measured in lines per inch, Than the highest number or the one with the smallest openings goes in first, and then the smaller numbers In succession on top of it! I’m not sure if they make bubble bags that are lines per inch! But they might! My screens are measured in lines per inch. But Gnicks I in Canada are measured in microns! So when he’s describing something to do with screen size that have to be taken into account in my case!

 

[Oldchucky]

How many and what size bags do you have? And who did you get them from? Let’s try and confuse you more! 25 µm! That symbol after the number, denotes microns! If all of your bags have that symbol after the number, then you are dealing in microns, not lines per inch! These are my screens! Labeled in lines per inch, or Mesh count! Nicks would be labeled in microns! So I would have to use that table to convert mine to microns!

 

[amneziaHaze]

you get a bucket you put 40microns inside of it then you put 60 then you put 90 then you put 120......
this way when you are done mixing you pull out the 120 first with grass. then 90 with "shitty" hash then 60 with better stuff and then 40 with almost nothing inside.

 

[Phreakshow]

How many and what size bags do you have? And who did you get them from? Let’s try and confuse you more! 25 µm! That symbol after the number, denotes microns! If all of your bags have that symbol after the number, then you are dealing in microns, not lines per inch! These are my screens! Labeled in lines per inch, or Mesh count! Nicks would be labeled in microns! So I would have to use that table to convert mine to microns!View attachment 2318299

They were some cheap no name brand bags. Just wanted to get my feet wet.

 

[Phreakshow]

you get a bucket you put 40microns inside of it then you put 60 then you put 90 then you put 120......
this way when you are done mixing you pull out the 120 first with grass. then 90 with "shitty" hash then 60 with better stuff and then 40 with almost nothing inside.

Thank you.