F
ForrestGUMP
- 100
- 28
What's a media filter lol ?
I had the same question.What's a media filter lol ?
Would acetone be safe?I had the same question.
Coffee filters don't work, and I have trouble buying sized paper rounds.
And any thoughts on how to clean a cintered filter?
I've just always used the lab filters off Amazon. Cheap afI had the same question.
Coffee filters don't work, and I have trouble buying sized paper rounds.
And any thoughts on how to clean a cintered filter?
My best advice would be invest in a ovenSo I've been having trouble getting my bho stable. I was wanting to try winterizing with Ethanol and running it through a buchner funnel. On bestvaluevacs.com there is options for both a fritted and non-fritted buchner funnel. Which one should I get and why lol?
Also if anybody has any advice to make my stuff "shatter" I would appreciate it. Im using a best value vac 1lb closed column extractor. I boil off the excess butane in a water bath and try to keep temps below 100 def f. Then I put it in a vac chamber with a heat jacket. Ive tried temps from 90-110 deg f. My pressure gets between -28.5 and -29 hg. I'm usually using a mix of close trim and small lower buds. Sometimes I trim fan leaves and run the whole plant. I let the tube sit on dry ice about 2 hours before blasting and I have been getiting around 10% return.
I was trying to purge for longer times in hopes to make it stable. Is it possible to over-purge lol? Sometimes it seems like my slabs will be see through and slightly stable like "snap and pull", for the first 24 hours. After another day or 2 it seems like it sugars up and turns slightly opaque. Final results are like crumble. I was thinking it was a strain thing but it seems like every strain comes out sticky.
Thanks!
My buddy has a nice oven that he let's me use. I get the same pressure as him and the end product looks exactly the same.My best advice would be invest in a oven
I guess im not sure if the extract is the same temp as the vac chamber. I will grab a laser thermometer for the next batch.shatter is what happens when u over purge and take out all of the terpenes. when vac purging ru getting the extract to 110f or whatever or just the chamber itself cause that could explain it. and a media filter is a powder like celite that acts as a filter instead of a paper filter
Interesting stuff. I tried doing an Amazon search for celite and didn't find much. I did find a buchner funnel that comes with filter paper though.search for celite instead.
ive heard mixed things about this company but i bet this product will work too
shatter is what happens when u over purge and take out all of the terpenes. when vac purging ru getting the extract to 110f or whatever or just the chamber itself cause that could explain it. and a media filter is a powder like celite that acts as a filter instead of a paper filter
Thanks man. I just ran a batch and it's been at 90 degrees for about an hour. I'm gonna turn it down to 80 right now lol.haha what? shatter is not over purged or lacking in terpenes. I vac at 80* for 5 days, last test came back with 6.2% terps and 18ppms of residual solvents.
most likely you're temps are too high. start your temps at 80 and go from there. if the muffin doesn't drop at a full vac, raise temps a little. I had the same problem for a solid year. I tried EVERYTHING including winterizing, you just lose terps with secondary solvents. all I did was drop my temps and boom....stable shatter everytime. I also started single solvent dewaxing which made everything even more stable but thats another topic.
What if for the first day it was see through and sticky, and after 3 days it is blonde crumble? Too much heat?https://www.amazon.com/Millipore-1-...ie=UTF8&qid=1513329791&sr=8-3&keywords=celite
says its temporarily out of stock but i kno people who hav bought it of amazon before
its basicaly just diatomaceous earth and ive heard of people using that too
Could this possibly be from me peeling and flipping the extract every few hours while it purges? My buddy told me to lol.thats sounds lik something called buttering and its from tiny air bubbles trapped in product
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?