Aqua Man
- 26,480
- 638
So yeah humidity is still a bit high for stage of growth. This can cause calcium issues also as transpiration is directly connected to nutrient uptake rates. Im not saying this is absolutely the cause but it sure doesn't help.I’m like two weeks into flower and my temp is averaging 75 and my RH is 55. I have a HLG 600H in both my 5x5 and 4x4.
Ok, let me read those then I will get back on here if I have any questions. I flushed the last two waters so today I went with a 500 ppm and 5.8 Pm feed. It’s my normal feed but he said above that it should be 500-800.If you can find or buy an IR temp gun you can calculate to a tee. They are cheap. If not I suggest using around 5f diff for leaf temps.
Hope you read that thread I linked because I'm going to assume you understand it. VPD is only needed for lights on and if possible night humidity should be lower. 10-15% is ideal but not absolutely needed
Use this calculator. It has the VPD for stages of growth listed right in it.
VPD Calculator - Vapor Pressur - Apps on Google Play
Simple calculator to generate VPD based on Air/Surface Temps and Humidity.play.google.com
I just noticed this is coco... smh... please read this also and try to get temps up. You should likely be aboit 600-800ppm and feeding much more often with runoff. I bet that solves your issues quickly.
HOW TO WATER COCO FOR BEST RESULTS.
Ok writing this cause i see this issue often and rather have a thread to link than explain this each time. This is not my work but a collection of info from many members here and I have put into practice myself. So first off COCO is NOT soil. For best results we want to keep it saturated...www.thcfarmer.com
Coco should be fed all the time not water feed. If ya go by the thread I made after a flush you should clear up your issues. Mix 50 50 RO tap and feed about 700pm phed to about 5 8.I feed water one day then nutes the next. I feed about 3/4 a gallon per plant and they all have about 20% runoff. Attached is the current room condition.
Cause they are not transpiring well. Try feeding 3 times a day if ya can for now forst at lights on then 4hr later and again 4 hrs after that getting some runoff. Do you have a circulation fan blowing under and through the canopy?The leaves are pretty hot
Also make sure its set to surface temp and take reading from 1 foot awayThe leaves are pretty hot
I have no clue what this says? Feed three times a day?Cause they are not transpiring well. Try feeding 3 times a day if ya can for now forst at lights on then 4hr later and again 4 hrs after that getting some runoff. Do you have a circulation fan blowing under and through the canopy?
Ok rushing here a bit since I will be gone and wat to get you sorted... all the info is in the posts I linked but lets just do this here.I have no clue what this says? Feed three times a day?
I have a 36” lasko tower fan blowing 24/7 and three small fans. One blowing on the light and the other two higher up circulating air.
I’m in 5 gallon fabric pots and running the GH three part with terminator and purpinator.Ok rushing here a bit since I will be gone and wat to get you sorted... all the info is in the posts I linked but lets just do this here.
What size pots?
What nutrients?
Here is my schedule.Ok rushing here a bit since I will be gone and wat to get you sorted... all the info is in the posts I linked but lets just do this here.
What size pots?
What nutrients?
I’m in 5 gallon fabric pots and running the GH three part with terminator and purpinator.
I do have a whole house water softner.Perfect I will type out exactly what to do here bit forst I need the answer to a couple questions so I know how your gonna mix things.
Can you use the RO exclusively?
Are you absolutely sure its not a water softener for the whole house? THIS IS ABSOLUTELY CRUCIAL information. If you have a water softener you absolutely CANNOT use the water after the softener. Not yelling just being loud clear bro
What would you suggest? This is by far the best grow I had done until this happened. Fox farms had small yields.have you ever thought about changing products?
I personally would not recommend gh 3part to anyone.
gh 3 part is super retro.
and if you are gonna use Cal-Mag why not use it at 5ml/gal as recommended?
You cannot use that water. It exchanges minerals like calcium, magnesium etc for sodium...THAT is 100% your issue if using it.I do have a whole house water softner.
What would you suggest? This is by far the best grow I had done until this happened. Fox farms had small yields.
I have an RO and RODI system for my fish tank. But everyone said not to use rodi.You cannot use that water. It exchanges minerals like calcium, magnesium etc for sodium...THAT is 100% your issue if using it.
So do you have access to water before the softener or RO water thats below 20ppm. Because even 40ppm of sodium is a bit to high IMO
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?