Carbon Filter set up?

UrbanGardener · Apr 19, 2010

Hi guys,

I'm about to grab a carbon filter and have never used one before. I'm growing in a 1.6m x .50m x 1.0m tent with a single 400w bulb in a cooltube. Cooltube is cooled by a single cpu exhaust fan that is outside the tent pulling through ducting that connects to the cool tube. What would be the best and most efficient way to add the filter to this set up? Thanks guys!

UG

Overvegg · Apr 19, 2010

Well you need a fan rated for the carbon filter. You probably need something stronger than a CPU fan. Otherwise thats how I have my ventilation setup.

UrbanGardener · Apr 19, 2010

Hey Overvegg, yeah I'll get a rated inline fan I think. Whats your set up up?

Overvegg · Apr 21, 2010

I run a 3x3 hydrohut with an active air 26x16 rated at 200-400 CFM and a sunleaves 6 inch fan rated at 409cfm. I dont have any problem with smell. I actually smoke in the same room because it filters that out pretty well too.

sedate · Apr 22, 2010

Yea a carbon filter sized appropriately to actually eliminate smell requires an inline cannon fan. A computer fan is uhh - not gonna do it.

It might be overkill for a single 400 - but heh it'd certainly take good care of ventilation.

Something like this:

El.Knightrider · Apr 22, 2010

get a six inch fan & hang it from the top of your tent, you should have even got one with the tent, all the best with it.

ugk1 · Apr 29, 2010

they sell small carbon filters at walmart that you plug into wall for ten buck, covers 6 feet i think might work

Carbon Filter set up?

Carbon Filter set up?

UrbanGardener

Overvegg

UrbanGardener

Overvegg

sedate

El.Knightrider

ugk1

Privacy & Transparency

Privacy & Transparency