I'll be doing my flowering in my closet. In order to run my intake/exhaust tubes, I'm thinking that having a door just won't be feesible. I rent, so i don't want to cut giant holes in the door or drywall.
What do you guys suggest?
Best thing i can think of so far is a heavy blanket, i'm just trying to figure out how to make the edges flush so no light seeps through. I'm definitely not set on this blanket idea though, so go ahead and throw anything out there.
This is what I do. Use a small piece of plywood at the top on each side. This will require some screw holes in the door jamb. I use a zipper door on the inside and a velcro on plastic tarp for the outside. Also a flap vecro to the outside of the zipper. No light leaks and penetrations are made thru ply.
Yes on the remove the doors suggestion.... take the door off, and start from there.... when you are done, just put the door back and fill any nail or screw holes.
This is what I do. Use a small piece of plywood at the top on each side. This will require some screw holes in the door jamb. I use a zipper door on the inside and a velcro on plastic tarp for the outside. Also a flap vecro to the outside of the zipper. No light leaks and penetrations are made thru ply.
I super frugal so I used a new black shower curtain that has some microbial protection according to the label it's seems to be doin the job but I would grab the thick black plastic if I had the coin. My local store wants insane about for that so I use what.
Grow stores sell them or order online. There about 10-15$ I think they are 7 ft long. I just cut mine at the bottom with scissors. U put up your tarp and then stick the zipper to the tarp and cut it with a razor as u unzip. I reinforce mine with duct tape and staple the top to the plywood. They last 1-2 harvest depending how clumsy I am goin in and out.