Dude,,, if i have 10 buckets in my tent that is just 1 less than what i just ran!too late!
I use it for the system!
I need 3 extra bulkheads for next run so i can pull the epicenter out of the tent..
Dude,,, if i have 10 buckets in my tent that is just 1 less than what i just ran!
It should really bang out some colas!
I think im just gonna use fan leaf technique with scrog already installed..
But bro i can't quit thinking of how incredible having 10 buckets in there,
WITH the net pots that have 4- 5.5 netpots..
Thats 40 fan leaf techniqued plants..
Might be epic!
Well my pvc running out the tent goes thru a 6" ducting hole so no worries there..Eh 5% on 4$ is only 20 cents anyways haha..
Would be cheaper if you got two 2” pvc couplings, a 2” pvc tee, some pipe, & 1 2” bulkhead..
When I was re-arranging my buckets I had the same situation as you where there was no pipe to cut between the bulkhead and the fitting. what I did was use a rubber no-hub coupling and that will barely fit over the fitting/bulkhead and allow you to join the pipe to it.
You will need a no-hub rubber coupling anyways because you don’t want to have to drill a hole big enough for the whole bulkhead through your tent..
Something like this..
LDR 808 NHC-200 2-Inch no Hub Coupling https://www.amazon.com/dp/B004678ECE/ref=cm_sw_r_cp_api_dha0zbABZWRSP
well I promise you im KING KONG and im gonna be the master of my jungle lol!Lol.. there is a point where it becomes too much bro.. even 6 buckets in you 4x8 space you can easily max your space out with 3-4 weeks of veg. 10 buckets I bet you wouldn’t even want to veg for more than a week or two.. it would be like a freakin jungle in there!
Let me know if you want pics of how I used the rubber couplings..
Unfortunatly i cant get nothing in there bigger than 2x5..Your tent has a 6” duct hole at the very very bottom of your tent?!? Pic?
I would not trust one of those inside a house.. I would only trust that if you were somewhere flooding doesn’t matter that much.. get 2x brute trash cans if you want 100 gallons of Rez..
well I promise you im KING KONG and im gonna be the master of my jungle lol!
Hahaha this hash i made is pretty good. Was green looking and i thought it was gonna be god awful... but it may be my best..
Sometimes you just dont know wtf you got!
Your right tho! I will have to employ certain techniques,
and im still learning, but this exactly the platform I would ask to learn on...
Im just gonna buy new and use them..
That way when i sell my system in about 5 years it will still have all the stock pieces too.
I only plan to run full ballz to the wall for 5 yrs,,
Then i reduce down to just a good light and a 3x3 box for personal...
by then i will be able to afford a 600 chilled led and bang out 2 peasies a run in it..
Unfortunatly i cant get nothing in there bigger than 2x5..
I never thought i would need to get a brute can in there.. I would have to remove drywall and some studs, and go thru the wall AND that aint happening..
And let me see if i can find a pic..
Its the only thing i can get in there..Lol King Kong or not bro you will see shit literally explodes in this system..
Eh imo you want something solid, brute cans are just the cheapest and easiest things to use. I’ve seen ppl use those flexi tanks inside before but I’m a clumsy motherfucker and I known I would lean on it wrong or something and dump the whole Rez in my room..
Its the only thing i can get in there..
Beleive me i wanted something diff but i dont have no other choices..
This the best pic i got..
I get a better one later..
Ya i checked them out too..If you want to be official scroll all the way to the bottom and get the 250 doorway tank..
I might have to check that!!The hole on the right side of the bucket? You think it’s gunna be low enough? I have a gorilla tent so I’m sure it’s different but none of my duct holes were even close to the bottom at all..
My hole starts like 1-1.5” up from the bottom of the tent
Ya i checked them out too..
A lil big still..
This isnt a reg doorway..
I closed off a room and made a small doorway that will have a closet in front of it..
Not so much to hide it from cops as im just dont want kids, grand kids, vistors or burglars to find it..
Well imo if that’s your only choice build something to make sure it doesn’t collapse on you somehow. You don’t want 100 gallons dumping into your room with a float valve to dump more.
Here’s a pic of my epicenter going through my tent for reference.. also shows the rubber coupling I was talking about if you need to cut the pipe on a bulkhead flush..
Bulkheads are $$$ couplings are cheap and available at any hardware..
Its gonna set behind my tent in the corner..Well imo if that’s your only choice build something to make sure it doesn’t collapse on you somehow. You don’t want 100 gallons dumping into your room with a float valve to dump more.
Here’s a pic of my epicenter going through my tent for reference.. also shows the rubber coupling I was talking about if you need to cut the pipe on a bulkhead flush..
Bulkheads are $$$ couplings are cheap and available at any hardware..
Its gonna set behind my tent in the corner..
Ya I know they aint cheap but hell i got 2" uniseals already that I could use!
Didnt think of that!
Because they remind me of my sewer..I hate uni seals lol.. why not use rubber couplings? I’m a plumber, I trust those waayyyyy over a uni seal... plus uniseals are a complete pain in the ass..
Maybe build a small 2x3 wall up half way or 3/4 the sides of the Rez..?
Because they remind me of my sewer..
I got a 1200 machine with sewer extentions on it..
Lol...
Im not against using them per se..
Hell i used them 20 years ago to steal anhydrous ammonia out of huge mother tanks..
Im an expert in them...
:)
sounds like a tell all of my life story!!well I promise you im KING KONG and im gonna be the master of my jungle lol!
Hahaha this hash i made is pretty good. Was green looking and i thought it was gonna be god awful... but it may be my best..
Sometimes you just dont know wtf you got!
Your right tho! I will have to employ certain techniques,
and im still learning, but this exactly the platform I would ask to learn on...
Im just gonna buy new and use them..
That way when i sell my system in about 5 years it will still have all the stock pieces too.
I only plan to run full ballz to the wall for 5 yrs,,
Then i reduce down to just a good light and a 3x3 box for personal...
by then i will be able to afford a 600 chilled led and bang out 2 peasies a run in it..
I agree brother!sounds like a tell all of my life story!!
I am able to bang out lots o bud from a small space because I employ sound practices and solid techniques....Maximize Canopy space and let nature do the rest
just as you and I have preached
Sometimes I just think people just dont get it
people see pictures of buds and hear stories and think there is some kind of trick or secret warp to the next level
but when you visit a serious facility...and they are movin serious weight and realize the only thing they are doing is "standard practices" it takes a shit on the "secret recipe" narative
even then people still have it in the back of their mind that there is an easier way
reality is
1. Cultivar/Genetics
2. Light
3. CO2/O2
4. Water
5. Nutrients
in that order
and then solid frowing techniques/practices
Canopy maintenance
Feed ph
air flow
feed regularity
such easy stuff that many "new to the hobbie/industry" cant really grasp yet
but it is fun to see when the lightbulb finally goes on.....and they get it....how fast their grow changes to almost a professional by the numbers checklist in hand grow.....with great production and tasty flowers
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?