EventHorizan
- Posts
- 15,707
- Reactions
- 49,496
- Joined
- Jul 6, 2016
- Points
- 438
looking good homie..
looks like the trichs is just about perfect..
Well early morning tomm.,,,
night fellas
looking good homie..Takin it to the extreme with my techniques
look how beast mode these plants are gonna be
View attachment 761122
Can't wait to watch these grow. They're goin to be bushy fuckersTakin it to the extreme with my techniques
look how beast mode these plants are gonna be
View attachment 761122
3 daysHow long do you guys like to leave the lights out before harvesting?
yup coco and cns17 bloom from seedHow long do you guys like to leave the lights out before harvesting?
He'll yeah. I think they like it too.yup coco and cns17 bloom from seed
@14ml per gal
they like it light
I thought I heard that from you once before. Wanted to make sure.3 days
I would use the canna line and not the tea we are using@Wisher619
ive been checking wat others using the canna coco range are doing. i have the coco a+b, rhizotonic, cannazyme, boost and a small bottle pk13/14 as its only needed for 1 week. ph+ "normal not pro"... its potassium hydroxide and ph- organic.... its citric acid. So im definately going to cut down on thier "light feeding plan" about 3/4 the recomended dose a+b and about 1/2 of the rest. boost i will start in flower to save $$.
a couple of things still floatin around....
is the tea and additive you guys are feeding 1/week similar to the rhizotonic and cannazyme or do i need to find this tee?
everything canna says about water advises against using ro water. grow logs i read too. they say it just causes calmag issues. ive already ordered the ro unit so im on the fence....? i havent measured my water yet as i want to calibrate ec/ph meter first....get my build done first.
wat do you think about the tap? wat sort of ppm before nutes are we looking for if using tap? could mix ro to tap to get perferred starting ppm?
yeah man just let it sit in the dark...no water no lightHe'll yeah. I think they like it too.
I thought I heard that from you once before. Wanted to make sure.
Thanks
Interesting. Havent gotten any notifications by text or phone by PayPal but have been too sick for 2 days to even open email. I eeill go take a look now, thanks!he says he refunded you some money????
Soo we thinking at 79/80° at 75% we will be good but once we bump it to 100% im probably gonna have to invest in another fan to get more xool air flowing in correct? What was that fan you was thinking i may need?we might have issues in flower. Even tho im running a 400 just like you BUT in an open batwing... If you want to try the seperate fan recommendation that I recommended, that started WW3, just let me know
Well cold does induce the plant to finish out, but i agree there is no purp like pheno purp..
How ever in my neck of the woods, my purp Urkles Girl was the first purple bud I ever seen and the first anybody else here had seen in person.. And its desired! So if I can get top dollar just for purp, guess what im gonna grow..
As for the cookie glue she coming along nicely... I hope it has some purp, or im gonna have to cross it with some!
Shit brother im running late.. I get with you tonight about 7 pm your time..Soo we thinking at 79/80° at 75% we will be good but once we bump it to 100% im probably gonna have to invest in another fan to get more xool air flowing in correct? What was that fan you was thinking i may need?
Cool i may have to work it where lights on at night like uShit brother im running late.. I get with you tonight about 7 pm your time..
Im running the exact same setup as you..
With good temps at 400..
But i run my lights at night when its cooler.
I put my house temps at 67 bed time and it runs the tent about 78....
Interesting. Havent gotten any notifications by text or phone by PayPal but have been too sick for 2 days to even open email. I eeill go take a look now, thanks!
Stank is what I'm talkin about.yeah man just let it sit in the dark...no water no light
in 3 days there will be a stank
your test makes no sense to meHeya gang! Sorry for the absence. I have kind of been through a mini-torture gauntlet, spending the last couple days insheer misery sincemy little squid-fushing outin, most of that time bed ridden. Hopefully on the mend now, with around 7 or 8 pages to get caught up on it seems.
But first things first:
@Events:
I have only completed partial sress runs on the ballasts and here is what I have so far. All full length tests run at a 21/3 schedule btw, set at either 1000 or 1040 Watts. Also, Friday is the day I will reconfig the testing to use another hood and lamp; for this first set of test results to be meaningful I wanted to only change 1 or 2 variables per test run.
BALLAST 1:
TEST 1 (Power up /power down tests, disconnecting and reconnecting each time)
-1. Connect lamp cord to ballast 2.Connect power cord 3.Modify Watts setting if needed. 4.Record result. 5.Disconnect lamp. 6.Disconnect power cord. Note in about 1/3 of these tests I reversed the last 2 steps to identify any pattern in behavior, without success.
- Results: 1 failure ("E-04") and the other 5 suceeded.
TEST 2 (Power up /power down tests, with NO disconnecting and reconnecting each time)
- Results: 6 successes, 0 failures.
- TEST 3 (Full cycle runs, kicked off back to back (no disconnect,reconnect) when it did start fine with no E-04 code)
- Results: 2 successful runs
BALLAST 2 (worst damaged, part rolling around loose inside)
TEST 1 (Power up /power down tests, disconnecting and reconnecting each time)
-1. Connect lamp cord to ballast 2.Connect power cord 3.Modify Watts setting if needed. 4.Record result. 5.Disconnect lamp. 6.Disconnect power cord. Note in about 1/3 of these tests I reversed the last 2 steps to identify any pattern in behavior, without success.
- Results: 5 failures ("E-04") and the other 1 suceeded.
TEST 2 (Power up /power down tests, with NO disconnecting and reconnecting each time)
- Results: Partial test as the last test had such a high percentage of failures): 2 successes, 2 failures.
- TEST 3 (Full cycle runs, kicked off back to back (no disconnect,reconnect) when it did start fine with no E-04 code)
- Results: NA for now. This test was not run yet as the prior test had suchanenormously high reliability failure rate.
BALLAST 3
TEST 1 (Power up /power down tests, disconnecting and reconnecting each time)
-1. Connect lamp cord to ballast 2.Connect power cord 3.Modify Watts setting if needed. 4.Record result. 5.Disconnect lamp. 6.Disconnect power cord. Note in about 1/3 of these tests I reversed the last 2 steps to identify any pattern in behavior, without success.
- Results: 5 failure ("E-04") and the other 2 suceeded One extra test performed.)
TEST 2 (Power up /power down tests, with NO disconnecting and reconnecting each time)
- Results: 5 successes, 1 failure.
- TEST 3 (Full cycle runs, kicked off back to back (no disconnect,reconnect) when it did start fine with no E-04 code)
- Results: Kicked offround.1 tonight, second run at 1000W will conclude around 11 pm Wednesday night
Again,next round of tesggs will begin Wednesday night and another hood, socket, power cord and bulb will be used to test the 3 ballasts again.
Thanks!
I dont quite understand what he said either...your test makes no sense to me
you are connecting ballast to lamp then plugging ballast in and adjusting wattage.....wrong
you are supposed to plug everything together then plugging the ballast in to either a timer or power strip
adjust the wattage then flip the power strip on or timer on
your ballast that has something rattling I wouldnt risk it
but the other 2 ....if the cord is loose I would get a new cord and retry
Lookin fukkin sweeeet!Gettin that color goin
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?