Council Of First Knowledge, Jedi Temple Training Facility

bicky studs · Dec 13, 2017

Toph420 said:
ok cool thank ya

lol I cant do beets either..

Probably like 6mo-1yr? something along those lines...

Good idea, probably end up doing this.. I wonder if i can just use any activated aquarium charcoal or does it have to be some other kind?

https://www.amazon.com/NTnormal-Act...47&sr=8-6&keywords=activated+charcoal+pellets

pretty sure thats the same. its just active charcoal. i got some at the grow shop...about €4/kg i think. he had a big 40kg bag.

Toph420 · Dec 13, 2017

Wisher619 said:
Just for all you that may need help with your bakers math

Haha damn that is hilarious

MW7945 · Dec 13, 2017

So... when making green dragon, errr I guess tincture is the proper term.. how does one incorporate the lecithin. And how much is necessary. As far as alcohol, i think the strongest booze I'll find here is 151 rum. Maybe 160 proof but I doubt it.

Smerb · Dec 13, 2017

EventHorizan said:
woah...
I must of missed sumthang?
I dont like quotes with the word DICK in them.. Esp when there is a double transitive verb in front of it.....

Your right. The penis and other's didn't go well. Ha!

Wisher619 · Dec 13, 2017

MW7945 said:
So... when making green dragon, errr I guess tincture is the proper term.. how does one incorporate the lecithin. And how much is necessary. As far as alcohol, i think the strongest booze I'll find here is 151 rum. Maybe 160 proof but I doubt it.

I dont use it in alcohol
I use it in oil
as in decarb cannabis
throw in crockpot with coconut oil
set on low
add 1tbs sunflower lecithin
when done strain and you are good to go

EventHorizan · Dec 13, 2017

Toph420 said:
ok cool thank ya

lol I cant do beets either..

Probably like 6mo-1yr? something along those lines...

Good idea, probably end up doing this.. I wonder if i can just use any activated aquarium charcoal or does it have to be some other kind?

https://www.amazon.com/NTnormal-Act...47&sr=8-6&keywords=activated+charcoal+pellets

Ive been using mine 2 years and it dont stink as long as I run a tent in a lung room.. Any thing bigger and you want 8 to 10 inch fan and filter

EventHorizan · Dec 13, 2017

Wisher619 said:
Just for all you that may need help with your bakers math

WTF did I just watch..

Pain Releaf · Dec 13, 2017

bicky studs said:
if its ur average round metal one u can just unsrew it n replace the carbon pellets. if its riveted as mine was just drill em out n use selftapers to put it back on.
usually wen its letting out the stank. time to change.

Have you guys ever tried to simply remove the carbon, reactivate it in the oven and then reinsert it? I know it can work fine for hunting gear, etc...cannot imagine why it wouldn't work here...

Pain Releaf · Dec 13, 2017

SCORE
Just had an eBay Best Offer accepted for a BlueLab Guardian set up in good condition, guaranteed to work 100%, for just $138.... and cancelled my Amazon $230 order! Love it.

And if the probe wasn't cared for and isn't working properly, I will follow Events lead on a counter offer to get credit enough to order a new one. All in all I should come out way under new price! :D

Pain Releaf · Dec 13, 2017

EventHorizan said:
firewire is what I meant.. What i call it spiderwire...

J B Line One... for those in the know :)

Wisher619 · Dec 13, 2017

EventHorizan said:
WTF did I just watch..

the best math algorithm ever !!!!!

MW7945 · Dec 13, 2017

I feel like my light is cooking a lot of pistils on top.

Wisher619 · Dec 13, 2017

MW7945 said:
I feel like my light is cooking a lot of pistils on top.

how many weeks are you in to flower?

how close are your lights?

I can run mine @12" and be perfectly fine

if you have a fan blowin I would first look to the fan
lower the speed or adjust it
if it was the fan you will see new pistil growth in a few days

it can also be nutes

usually you only get bleaching from lights unless you are like inches
and hps cooks from heat not light intensity so since you have LED's the closer you get the more bleaching but not burnt pistils
if they are turning as in die ing back then you are getting closer to harvest

MW7945 · Dec 13, 2017

Wisher619 said:
how many weeks are you in to flower?

how close are your lights?

I can run mine @12" and be perfectly fine

if you have a fan blowin I would first look to the fan
lower the speed or adjust it
if it was the fan you will see new pistil growth in a few days

it can also be nutes

usually you only get bleaching from lights unless you are like inches
and hps cooks from heat not light intensity so since you have LED's the closer you get the more bleaching but not burnt pistils
if they are turning as in die ing back then you are getting closer to harvest

5 1/2 weeks into flower. The fan shouldn't be an issue, it's on low and hanging quite a ways up. Just enough to get the leaves to move around a bit. It's not all the pistols. Just some.

But I don't even know height I guess, I'd say 16" right now, but mine are pushing 75w a piece, you can run a 50w chip closer obviously

MW7945 · Dec 13, 2017

Aside from that there's nothing wrong with any of the leaves or anything. Not an abnormality on any of them.

Smerb · Dec 13, 2017

Pssss, I can't keep up with the Jedi facilities growth. 50 plus posts all the time. Vvvvvvvmmmm, that's my light saber.

EventHorizan · Dec 13, 2017

MW7945 said:
Aside from that there's nothing wrong with any of the leaves or anything. Not an abnormality on any of them.

Bro I m just about same point in flower. What do you see? Post a pic. Im making a new res as we speak, with ripe... @Wisher619 what do you run your ripe at? And you still using sweet raw? Until end or last week?

Wisher619 · Dec 13, 2017

MW7945 said:
5 1/2 weeks into flower. The fan shouldn't be an issue, it's on low and hanging quite a ways up. Just enough to get the leaves to move around a bit. It's not all the pistols. Just some.

But I don't even know height I guess, I'd say 16" right now, but mine are pushing 75w a piece, you can run a 50w chip closer obviously

my 3590's are ran at 75w
2100mA
I've had my lights as close as touching with no pistil burn
there is no radiant heat to burn the pistils
@5 weeks some of your pistils should be pullin back and turning
when you have 25% white pistils left you should start your flushing process

are your plants 8 or 9 week strain
if 8 then they def should be pullin back
put up anpic so we can discern between burn and die back

Wisher619 · Dec 13, 2017

EventHorizan said:
Bro I m just about same point in flower. What do you see? Post a pic. Im making a new res as we speak, with ripe... @Wisher619 what do you run your ripe at? And you still using sweet raw? Until end or last week?

Ripe first week 25ml/20ml/17ml
those are the 3 weeks of Ripe
that should be 1.7/1.3/1.0
as for the seeet raw
I stopped using it because I didn't notice a difference
but 6ml per gal up to flush

MW7945 · Dec 13, 2017

Wisher619 said:
my 3590's are ran at 75w
2100mA
I've had my lights as close as touching with no pistil burn
there is no radiant heat to burn the pistils
@5 weeks some of your pistils should be pullin back and turning
when you have 25% white pistils left you should start your flushing process

are your plants 8 or 9 week strain
if 8 then they def should be pullin back
put up anpic so we can discern between burn and die back

It's Sour Pink Kush (Sour Diesel x Pink Kush) I got off the store here. Says 8-9 weeks.

I can do a picture tomorrow, the lights shut off an hour ago

Council Of First Knowledge, Jedi Temple Training Facility

Council Of First Knowledge, Jedi Temple Training Facility

bicky studs

Toph420

MW7945

Smerb

Wisher619

EventHorizan

EventHorizan

Pain Releaf

Pain Releaf

Pain Releaf

Wisher619

MW7945

Wisher619

MW7945

MW7945

Smerb

EventHorizan

Wisher619

Wisher619

MW7945

Privacy & Transparency

Privacy & Transparency