Cree Cxb Bar

[thetdog666]

Hello, Im using a 1000mm in length heat sink. I was initially planning on using 4 x 3070CXB cobs with a HLG-185H-C1400B driver but want to change it to 3 cobs per bar.

Is the drivers still good for using 3 cobs or is there another one that would be better?
Also I take it will be running at 150watts per bar with 3 cobs?

Cheers TDog

 

[sixstring]

you can still use that driver for 3 x 3070 as long as they are cxb and not the cxa cobs. or you can use a mw hlg120h-1400ma for just 3 cxb. but using the first driver will give you room to add the 4th cob later. but i wanna say using cxb 3590 will be better either way you go.they take less power for more lumens basically

 

[thetdog000]

you can still use that driver for 3 x 3070 as long as they are cxb and not the cxa cobs. or you can use a mw hlg120h-1400ma for just 3 cxb. but using the first driver will give you room to add the 4th cob later. but i wanna say using cxb 3590 will be better either way you go.they take less power for more lumens basically

ok cheers, I thought i could save a few pennies by getting another driver but i cant so will stick to the 185H. I would be better off with 3590 but there 50 buk a go :(

Thanks for the reply.