H
HazePhase
- 120
- 43
Isn't every everyone's?Why is your writing black?
Its that dark mode thing. All good..Isn't every everyone's?
most of us just use angle aluminum from home depot or lowes.1.25 x 1.25 or 1.5 x 1.5 by however long you need your fixture.homedepot has these in 4 foot and 8 foot lengths and you can cut aluminum with a hacksaw pretty easy.drilling is also easy,i used nuts and bolts on my first build,then i got a cheap rivet gun and used rivets which was super easy and the rivets are cheap. now i make my own frames on a plasma table,but you can build with angle aluminum pretty cheap.see if i can dig up some pics for ya,peaceHello Everyone,
I am able to order the parts and they are pretty much plug and play for the Vero29 V7 which is what I am going to be using.
I am looking to build a 4 cob single array with 5000K LED in it.
I am looking for help in regards to:
- Where do you get material for building the array and what do people typically use?
- How do you drill through this material so I know what I have to buy to build this array
- Anything else I should know.
This is the only part that I am not sure about as other than that it's about mounting and drilling holes and screwing them in - quite straight forward.
My current company (a person) who was great help at start basically lied about my repaired item being shipped for 3 weeks and finally after 3 weeks it's been shipped - with the same courier he promised not to use as well he said he would express and didn't .... what a businessman .. .anyways..... people are who people are.
I need this COB Light in 4 weeks as my veg tent will be ready and I cut ties with the other guy for obvious reasons.
Anyone able to help a fellow panicked grower who has been screwed over by someone who obviously doesn't care for others buy himself.... :(
Located in Canada - thx Peeps!!
most of us just use angle aluminum from home depot or lowes.1.25 x 1.25 or 1.5 x 1.5 by however long you need your fixture.homedepot has these in 4 foot and 8 foot lengths and you can cut aluminum with a hacksaw pretty easy.drilling is also easy,i used nuts and bolts on my first build,then i got a cheap rivet gun and used rivets which was super easy and the rivets are cheap. now i make my own frames on a plasma table,but you can build with angle aluminum pretty cheap.see if i can dig up some pics for ya,peace
there ya go haha ^^^^^
yes it is,from home depot.but that one is not for water,its for co2 to drop down on the plants.Hey, Sixstring is that a sprinkler(drip) head in the shot? Details please.
stop lookin at my messy wiring n shit hahaThanks, just noticing.
Was thinking of hard piping my co2 with 1/2'' pvc with holes drilled in it,never thought of sprinkler heads though.yes it is,from home depot.but that one is not for water,its for co2 to drop down on the plants.
yeah man a kit like this you can plumb up a decent size grow to have a mist head in front of every fan like i did.i just removed the mist heads so it flows freely and connected the main line to my regulatorWas thinking of hard piping my co2 with 1/2'' pvc with holes drilled in it,never thought of sprinkler heads though.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?