DemonTrich
- 6,394
- 313
So I've had this idea for a few weeks to keep my aero cloner temps down for ONE picky azz strain. Let's see if it actually will work.
This DIY is made to cool the air I have in the cloners. Each cloner HSA an air line and stone.
Tools needed
20oz pop bottle, water bottles, lunch ice things, or the like.
Styrofoam cooler
Something to weigh down the packs and air line tubing 8nside the cooler. I used a milk jug filled half way with cold water.
Fill cooler with 5" of cold water. Wrap air line around frozen item many many times. Place in cooler. Put milk jug or the like to keep the air line/bottle submerged.
Plug in, turn on, and wait about 30 mins and check water temps.
Before my DIY, water res temps are 82*. Cooler water temps are 61.
I have 20 mins left for my next temp reading. Air line alone reads 76* from cooler into aero cloner.
I'm not 100% sure this can or will work, but hypothetically it should.
This DIY is made to cool the air I have in the cloners. Each cloner HSA an air line and stone.
Tools needed
20oz pop bottle, water bottles, lunch ice things, or the like.
Styrofoam cooler
Something to weigh down the packs and air line tubing 8nside the cooler. I used a milk jug filled half way with cold water.
Fill cooler with 5" of cold water. Wrap air line around frozen item many many times. Place in cooler. Put milk jug or the like to keep the air line/bottle submerged.
Plug in, turn on, and wait about 30 mins and check water temps.
Before my DIY, water res temps are 82*. Cooler water temps are 61.
I have 20 mins left for my next temp reading. Air line alone reads 76* from cooler into aero cloner.
I'm not 100% sure this can or will work, but hypothetically it should.