mxer.kx
- 23
- 13
Hi everyone. To make a long storey short like a year and a half mayve two years ago I was upgrading my mars leds to cobs based om a tutorial put out by growmau5 on YouTube. i mixed up what I thought I was purchasing bought the wrong cobs thought damn that was cheap got the package completely wrong cobs and realised why so cheap. Got angry put the box away and forgot...untill today lol .. so currently i have
16 x bridgelux Vero 10 3000k Starboard
BXRC-30E1000-D-73 Bridgelux | Optoelectronics | DigiKey
Order today, ships today. BXRC-30E1000-D-73 – LED Lighting COBs Engines Modules Chip On Board (COB) series White, Warm Starboard from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.com
4 x bridgelux Vero 10 4000k Starboard
BXRC-40G1000-D-73 Bridgelux | Optoelectronics | DigiKey
Order today, ships today. BXRC-40G1000-D-73 – LED Lighting COBs Engines Modules Chip On Board (COB) series White, Neutral Starboard from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.ca
4 x bridgelux Vero 10 2700k Stsrboard
BXRC-27E1000-D-73 Bridgelux | Optoelectronics | DigiKey
Order today, ships today. BXRC-27E1000-D-73 – LED Lighting COBs Engines Modules Chip On Board (COB) series White, Warm Starboard from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.ca
Now I've read through the guides and to be completely honest I really don't understand it at all. I am having a very hard time trying to grasp what I will need in terms of a driver. I have some but VERY minimal experience soldering but seen some great guides that have it explained it quite well. If anyone is feeling gracious enough to point me in the right direction or helping
Decide on the best way to use these and or best driver choices. Can use in flower or veg room but based on spectrum leaning towards flowering. Any assistance is greatly appreciated. Thank you!!
Hi thank you. Dont have the driver yet thats where I need the most help. Need help deciding wich one/s
Can you provide the forward voltage range for those chips? I have an idea about what it is, but I can give you a better answer once that information is provided. Thanks.
We responded the same time lol...i was thinking in series i may be wrong but that will draw less amperage correct? I am some what limited on available amperage here untill i get my panel upgrade in a few months (woohoo lol)...was thinking of doing a board with them maybe actually come to think of it i got a perfect spot to use 2 panels 12 cobs each 8x3000k 2x2700k 2x4000k
I do appreciate you taking the time to help thank you
Thanks for the reply was wondering could i go 2 boards 6 chips in series 2 drivers each board for a total of 4 drivers if i understand correctly i take the voltage per chip multiply by how many chips in series and matching driver needs to have more volts in the output then the total amount of volts of all chips in the series.? In terms of board do you think i need passive heat sinks or could i go say 1/4 inch aluminum sheet?
Thank you much appreciated
Still somewhat confused sorry if im being a pain here but to clarify is it when wired in series the driver output needs to be greater then (in this case) 25.3 v so i could use something like ameanwell hlg-185h-36a driver to power 6 of the cobs in series? Or can i do more ? Or less? ...Orrr alternatively is it the total voltage of the cobs in series so in this case 25.3v x6 cobs which equals 151.3 volts requiring a driver with an output greater then 151.3 volts.....sorry again for all the questions i dont know if im over thinking it or just really not grasping it... if at all possible can you recommend a driver to power 6 or 12 cobs in series?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?