THCFarmer.com
121,279 Members Log In Register
Log In Register

dry sifting to hashish pressing

  • Thread starter Thread starter GNick55
  • Start date Start date
  • Tagged users Tagged users None

dry sifting to hashish pressing

GNick55 1,162 Replies 147,455 Views
Page 48 of 59 · Replies 941–960 of 1,163
#941
Oldchucky said:
Dammit Nick! You got me started! Going to press some of the world, famous, Red Bluffian Brown, sift In a minute! When I finish yesterday, I thought, look at this crap! What a waste of time! But I Tried a small test, and It pressed pretty good! L O L! I almost just threw it away!View attachment 2380963
Click to expand...
is that a sativa or indica? or hybrid
 
#942
It’s actually two or three year old, pretty oxidized and super bone dry big foot glue! But it would still get you loaded when you smoked it so I decided to try sifting it! It was so dry part of the stems, would turn to powder when you were breaking it up!😂 Will post the results in a half hour or so if you’re still up! But it looks like a fairly nice haul!
 
#943
Oldchucky said:
It’s actually two or three year old, pretty oxidized and super bone dry big foot glue! But it would still get you loaded when you smoked it so I decided to try sifting it! It was so dry part of the stems, would turn to powder when you were breaking it up!😂 Will post the results in a half hour or so if you’re still up! But it looks like a fairly nice haul!
Click to expand...
haha ya am up..
is those numbers micron sizes?
cleaned it too?
 
#944
Mash! 110 and 160! No it was like 90% humidity but it was about 40°! So Just screened! Finished the 110 and it doesn’t look too bad! Did half of the 160 and the same with it! Going to do the other half, throw it in the freezer for a few minutes and peel it out and see what we have! I wonder how many people have looked at their three year old weed, all funky looking And just thrown it out.😁
 
#945
Oldchucky said:
Mash! 110 and 160! No it was like 90% humidity but it was about 40°! So Just screened! Finished the 110 and it doesn’t look too bad! Did half of the 160 and the same with it! Going to do the other half, throw it in the freezer for a few minutes and peel it out and see what we have! I wonder how many people have looked at their three year old weed, all funky looking And just thrown it out.😁
Click to expand...
well very nicely done,..
i’m smoking some of the cleaned 73 stuff and very tasty with a hint of spice..
 
#946
The 110 on the right. 160s on the left! 110 seems to be the sweet spot. But I’ll take those 160s any day of the week! Threw it in the freezer and will peel it off in 15 or 20 minutes and see how much I almost threw away! 😁🍻 going to combine them and throw them back in the freezer and maybe press them a second time together! Kind of depends on what it looks like when I peel it out! I might just work it! I’m kind of blown away! Time for another beer!🥴
IMG 4124
 
#948
I am running 90, 110, 160, and 200! I just find it weird that’s the stuff under the 90 is junk and then the stuff under the 200 is junk also! But the other two just seem to trap most of the tri-combs heads! That’s what I get for thinking!
 
#949
Oldchucky said:
The 110 on the right. 160s on the left! 110 seems to be the sweet spot. But I’ll take those 160s any day of the week! Threw it in the freezer and will peel it off in 15 or 20 minutes and see how much I almost threw away! 😁🍻 going to combine them and throw them back in the freezer and maybe press them a second time together! Kind of depends on what it looks like when I peel it out! I might just work it! I’m kind of blown away! Time for another beer!🥴View attachment 2380964
Click to expand...
well you out did me,. i will admit to being a bit sloppy with all the steps but no excuse,.. you did an amazing job,.. looks like some great hash resin!.. i’d work it all into a ball and hit bottle press both sides to warm it up and than work it with your hands for a bit than finish with a shape you like,..
no boobies! 😆😆
 
#951
Oldchucky said:
I am running 90, 110, 160, and 200! I just find it weird that’s the stuff under the 90 is junk and then the stuff under the 200 is junk also! But the other two just seem to trap most of the tri-combs heads! That’s what I get for thinking!
Click to expand...
ok your using mesh size so 200 mesh is 74 micron and your getting nothing off that? than your 90 mesh is 149 micron,.. what’s your work sifting screen size?
 
#953
Only 24 inch screens! I loop the 90 and the 200 and there aren’t very many heads in there! I know it doesn’t make sense to me either! But I think I’m learning not to go gorilla when I’m breaking this shit up when starting and working on the top screen!
 
#957
I don’t see how you get anything to go through a 45 µm bag! I’m kind of assuming that that stuff came through a73 µm bag and collected in a 45 µm bag! Unless washing, enables it to go through! I have a 300/45micron Screen that hardly anything goes through! Do get some through the 200/73 µm though. Maybe the water breaks it up finer? 45 µm is pretty damn fine!
 
Page 48 of 59 · Replies 941–960 of 1,163
Back
Top Bottom